Electrical Engineering Project Topics and Materials (Page 9)

Showing 201 - 225 of 530

201) DESIGN AND FABRICATION OF A SOLAR-POWERED ELECTRIC STOVE FOR RURAL AND URBAN COMMUNITIES

Abstract More than 2.2 million Ghanaian families in rural areas depend on firewood and charcoal as fuel for cooking [1]. This high dependency is taking a toll on forest resources due to rampant deforestation. “Ghana's forest cover, which stood at 8.2 million hectares in 1900, has now been reduced to about 1.2 million hectares, with an estimated... Continue Reading

202) AN ALTERNATIVE TO THE MANUAL COWPEA SORTING PROCESS

Abstract Cowpea traders find the manual sorting process of cowpeas laborious and time-consuming. Based on the volume of cowpeas and the proportion of damaged cowpeas, the process can span a time interval of about 6 hours. This project integrates the power of computer vision and convolutional neural networks to develop a solution for the cowpea... Continue Reading

203) DESIGNING A LOW-COST SOLUTION FOR GUITARISTS IN GHANA WHO CANNOT AFFORD TO IMPORT EFFECT PEDALS

Abstract Music is a very important part of the Ghanaian society and it serves many purposes. In more recent times, the guitar has been one of the most widely used melodic instruments in music production. With the invention of the effect pedal, guitarists worldwide have been able to use a wider variety of tones to produce more complex and enjoyable... Continue Reading

204) ENERGY MONITORING FOR SMART HOMES USING INTERNET OF THINGS

Abstract The increasing demand for electricity in Ghana has led to concerns about energy conservation, to reduce the rising energy costs as well as the carbon emissions produced from energy generation. Popular energy conservation methods used in Ghana include turning off devices when not in use and using Light Emitting Diode (LED) lamps in place... Continue Reading

205) SMART SYSTEMS AND THE INTERNET OF THINGS (IOT) FOR WASTE MANAGEMENT

Abstract Waste management is a raising concern faced by many nations in the world today. On the streets of major cities, it has become almost common to find waste which poses health hazards and other concerns to its communities and inhabitants. This project focuses on the use of smart systems and the Internet of Things (IOT), to provide an... Continue Reading

206) EMOTION RECOGNITION FROM SPEECH: AN IMPLEMENTATION IN MATLAB

Abstract Human Computer Interaction now focuses more on being able to relate to human emotions. Recognizing human emotions from speech is an area that a lot of research is being done into with the rise of robots and Virtual reality. In this paper, emotion recognition from speech is done in MATLAB. Feature extraction is done based on the pitch and... Continue Reading

207) FAST DETECTION OF MOBILE PHONES IN THE EXAMINATION HALLS, CLASSROOM AND DORMITORIES OF YEJI SENIOR HIGH TECHNICAL SCHOOL USING GSM TECHNOLOGY

Abstract  This work involves the design and development of a digital signal detector which is  capable of detecting incoming and outgoing signals from mobile phones. The presence  of an activated mobile phone can be detected by this handy, pocket-size mobile signal  detector from a distance of one and a half meters, which could be used in... Continue Reading

208) DESIGN AND PERFORMANCE EVALUATION OF A BATTERY/SUPERCAPACITOR HYBRID STORAGE SYSTEM FOR RENEWABLE ENERGY APPLICATIONS

ABSTRACT The development of any nation and its economy at large is centred on reliable and efficient power supply. Many developing nations are yet to actualise this feat, and therefore, there is need to strategize to meet the ever-rising demand for energy. Battery-based inverter systems have over the years provided additional power supply to... Continue Reading

209) A TRACKING AND BILLING SYSTEM FOR COMMERCIAL VEHICLES

Abstract The Ghanaian transit system poses certain challenges to users, as it usually has passengers waiting at bus stops for a bus to their destination, for an unknown amount of time because there is no means of tracking the buses. The system is also problematic as passengers usually argue with bus conductors for change, when payments are made in... Continue Reading

210) MAXIMUM POWER POINT TRACKING OF PHOTOVOLTAIC SYSTEMS FOR RURAL APPLICATIONS

ABSTRACT PV modules exhibit a point at which its power is maximum; this point is called Maximum Power Point (MPP). Due to changes in weather conditions, the MPP changes and the PV module efficiency. Specifically, temperature and irradiance are the parameters that affect the solar panel characteristic properties. This project describes and... Continue Reading

211) A SMART BREATHALYZER SYSTEM FOR GHANA

ABSTRACT Imagine a five-year-old boy losing his life by being knocked down by a drunk driver who has been intoxicated with alcohol. The driver’s carelessness will cause the family of the little child so much pain, as well as lead to a significant loss of human resources in the country. Road accident according to research has been the second... Continue Reading

212) MODELLING AND OPTIMIZATION OF A HYBRID ENERGY SYSTEM FOR GSM BASE TRANSCEIVER STATION SITES IN EMERGING CITIES

ABSTRACT This study presents the modelling and optimization of a Hybrid Energy System (HES) for GSM Base Transceiver Station (BTS) sites in emerging cities. The aim is to ensure reliable and cost-effective power supply, considering the availability, dynamism and viability of energy sources. Theoretical approach is applied in the modelling,... Continue Reading
  • Type:Project
  • ID:ELE0315
  • Pages:337

213) CONSTRUCTION OF ARDUINO BASED QUADRUPLE AUTO POWER SUPPLY FOR DOMESTIC APPLICATION

 ABSTRACT  The problem of epileptic power supply and its consequences in the developing countries is a generally known issue. Worst still, the hope that it will be addressed with the deregulation of electricity Industries in recent time are being dashed by flight to top class investors due to its poor implementation. There is a need to provide... Continue Reading

214) DESIGN AND CONSTRUCTION OF A 40A INTELLIGENT CHARGE CONTROLLER FOR THE DEPARTMENT OF ELECTRICAL AND ELECTRONIC ENGINEERING

ABSTRACT This project presents a 40A maximum power point tracking solar charge controller. The MPPT charge controller tries to keep the voltage and the power stable. The MPPT charge controller will harvest more power from the solar array – it will adjust its input voltage to harvest the maximum power from the solar array and then transform this... Continue Reading

215) DESIGN AND CONSTRUCTION OF A ROBOTIC ARM WITH ADAPTIVE BEHAVIOUR

ABSTRACT  This project work covers the design and construction of a robotic arm mechanically capable of 5 Degrees of Freedom. It solves the problem of automatically detecting and picking up objects placed within distances of 10-30cm round the robot base platform. It does this by using a simplified forward and inverse kinematic relation modeled in... Continue Reading

216) DESIGN AND CONSTRUCTION OF A WIRELESS SMART METER

Abstract  Consumers’ complaints of estimated bills from the Utility have risen to an alarming extent in recent years. On the other hand, Utility incurs huge losses attributing it to electric energy consumption theft among consumers. These complaints by the utility and the consumer led to the quest for a system that in addition to recording... Continue Reading

217) DESIGN AND DEVELOPMENT OF COMPUTER BASED TEST SYSTEM TO FACILITATE E-EXAM.

ABSTRACT  The purpose of this project was to design and develop a Computer Based Testing (CBT) system in order to facilitate the process of conducting e-examinations especially in tertiary institutions. There is a growing need to find an easy and effective way to carryout continuous assessments for the increasing population of students. The CBT... Continue Reading

218) DEVELOPMENT OF A DYNAMIC ATM HANDOVER RESOURCE RESERVATION SYSTEM

ABSTRACT With the growing demand for higher bandwidth multimedia services in a network domain over the past few years, Asynchronous Transfer Mode (ATM) has emerged as a fine solution. ATM provides mobility support for mobile users as they move among base stations. One of the key issues to support user mobility is the handoff. Efficient usage of... Continue Reading

219) GSM MOBILE APP: A SOLUTION TO THE CHALLENGES OF THE CURRENT VOTING SYSTEM IN TERTIARY INSTITUTIONS IN NIGERIA

 ABSTRACT    The word “vote” means to choose from a list, to elect or to determine. The main goal of voting (in a scenario involving the students of a given tertiary institution), is to come up with student-leaders of the students’ choice.Most tertiary institutions, FUTO not an exception have problems when it comes to voting. Some of the... Continue Reading

220) IMPLEMENTATION OF DATA LOGGING WITH WIRELESS SENSOR NETWORKS

ABSTRACT    The goal of this project was to design a data logging interface using wireless network principle in order to facilitate the process of monitoring physical parameters such as temperature, pressure, humidity, e.tc in the environment. There is a growing desire to find an efficient and cost effective means to monitor these physical... Continue Reading

221) INVESTIGATION OF VOLTAGE STABILITY IN NIGERIA INTEGRATED POWER SYSTEM USING PATTERN RECOGNITION FROM POWER SYSTEM SIMULATOR FOR ENGINEERING (PSSE)

ABSTRACT  The basic idea deals with detecting the voltage collapse ahead of time to provide  the operators a lead time for remedial actions and for possible prevention of  blackouts. To detect cases of voltage collapse, pattern recognition in conjunction  with power system simulator for engineering (PSSE) program was created and then ... Continue Reading
  • Type:Project
  • ID:ELE0306
  • Pages:105

222) NUMERICAL ESTIMATION OF ELECTRIC FIELD RADIATION BEHAVIOUR FOR BPLC SYSTEM

Abstract —Radiation on BPLC caused by presence of high frequency communicating signals is discussed in this paper. The paper presents the derived mathematical model which expresses electric field radiation behavior of BPLC system. The model was developed using the combined numerical method of moment (MOM) and transmission line transient (TLT)... Continue Reading

223) MICRO-CONTROLLER BASED ACCESS CONTROL LOCK USING FINGERPRINT BIOMETRICS AND PASSCODE AUTHENTICATION

ABSTRACT  This project report is an excerpt of the design of a Micro-controller based Access  Control Lock system implemented to assist the university with the aid of security  personnel in the prompt detection of students who have not completed necessary  fees payment and to checkmate the problem of the ever increasing rate of  examination... Continue Reading

224) MINIMIZING ELECTRICAL POWER OUTAGE IN AKWA-IBOM STATE - A PANACEA TO POOR POWER SYSTEM RELIABILITY

ABSTRACT This work analysed the current state of power system in Nigeria with emphasis on distribution system using Akwa Ibom Distribution System as a case study. The components of the study system were analyzed. This work adopted the analytical and simulation approach to reliability and stability assessment. Analysing the system the way it is... Continue Reading

225) WATER LEVEL INDICATOR- A PROJECT REPORT

This project is about water level indicator using raspberry pi. In this project we used led to  indicate the different levels and the raspberry pi to display were exactly the level is at in terms of  percentages. The simple water level indicator will activate an active buzzer which will make a  continuous noise when a certain level of water is... Continue Reading
Need help with your Electrical Engineering Project Topic? Click here to request assistnce or reach us on + 234 813 0686 6500
whatsappWhatsApp Us