Abstract: The effect of science and technology had led to the development of computers and its application to various production fields. EAR is a new type of attendance software. It is aimed at eliminating the old method of keeping records of staff attendance on daily bases, through electronic means. TABLE OF CONTENTS: CHAPTER ONE... Continue Reading
ABSTRACT The design and construction of a 60A, 3-Ф automatic power changeover from public utility supply to generator and vice versa was aimed at providing a useful system for use in our homes or offices. The system was achieved with a 66A 3-Ф contactor, 100mA transformers and relays. The system turns on a generator when the public utility... Continue Reading
ABSTRACT. To achieve most accurate coverage area results during installations of sector antennas, the technical team must create a coverage map for each of the sectors basing on the provided coverage values. The technical team uses these values to make manual position adjustments of sector antennas. Manual antenna adjustments are sometimes risky... Continue Reading
Abstract My project is to improve JIT store management system from manual to automated system. Which is used to avoid problem faced by store keeper when store material manually. Store is the place where many varieties of materials are kept for the purpose of work. So at a time of storage is hard to write in document all material listing by... Continue Reading
ABSTRACT This project work is focused on the design and construction of obstacle detection system for the visually impaired. This paper reports on a study that helps visually-impaired people to walk more confidently. The study hypothesizes that a smart walking stick that alerts visually-impaired people over obstacles in front could help them... Continue Reading
ABSTRACT A digitally controlled light dimmer circuit is based on the principle of power control using thyristor. The switch enables light from an electric bulb to be raised from full brilliance down or up to a high range of luminance. Owning to its construction, adequate conservation of energy is achieved. The circuit is made in... Continue Reading
The internet is an unavoidable infrastructure that can provide enormous benefits to the average person/organization. Unfortunately there are elements whose goal is to interfere with the smooth benefits of it to users for either mischief or criminal intent. This has spawned a bourgeoning industry that focuses on developing and deploying... Continue Reading
This project is about water level indicator using raspberry pi. In this project we used led to indicate the different levels and the raspberry pi to display were exactly the level is at in terms of percentages. The simple water level indicator will activate an active buzzer which will make a continuous noise when a certain level of water is... Continue Reading
ABSTRACT This work analysed the current state of power system in Nigeria with emphasis on distribution system using Akwa Ibom Distribution System as a case study. The components of the study system were analyzed. This work adopted the analytical and simulation approach to reliability and stability assessment. Analysing the system the way it is... Continue Reading
Abstract The utilization of solar energy is most concerned source in energy sector nowadays. The building integrated photovoltaic solar panels are increasingly constructed in dense urban areas because they brought many advantages to the society along with energy saving features. However, at the same time, they raise tensions in capital... Continue Reading
ABSTRACT This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work. I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this project, I shed light on the basic principle... Continue Reading
INTRODUCTION: The main objective of this project is to develop an Automatic Door opening system using IR sensors which will reduce the need of manual labor. plays a very important role in domestic applications. The elimination of manual supervision adds up as an additional advantage for its ... Continue Reading
ABSTRACT No one form of power can sustain a nation. The ever increasing demand for electrical power has arisen from our lifestyles with revolves around electric power to speed up processes of development such as manufacturing, service provision and general well being of man. The need for the provision of quick but minute energy to prevent the... Continue Reading
ABSTRACT This project, 12v battery charge consist of few chapters, deal extensively with the design and construction of a batter charge which is capable of charging a 12v battery. The introductory chapter goes a long why in defining the battery charger and explanations of the mode of operations will be death with as we proceed. TABLE OF... Continue Reading
ABSTRACT This project as the name implies is chosen, designed and constructed with the intention of transmitting information such as musicals news intertainments programs and soon. And all these that are written above are being transmitted to the atmosphere using an electromagnetic, signal, and this particular project design and construction is... Continue Reading
ABSTRACT This project shows the construction of a microcontroller based security door using smart card. It is aimed towards programming the microcontroller to control the hardware in sliding door. The system consists of a microcontroller 89S52 which sends a signal to the multiplexers on insertion of the smart card in the card slot. The... Continue Reading
ABSTRACT This research work designs a wireless power transfer system (WPT) for non smart phones as an alternative to existing wired power supply systems for these devices. Initially, the general concept of known WPT systems and methods are introduced and reviewed. It was noted that most existing WPT models do not consider external interferences in... Continue Reading
Wireless power transfer (WPT) technologies have been widely used in many areas, e.g., the charging of electric toothbrush, mobile phones, and electric vehicles. This project introduces fundamental principles of three WPT technologies, i.e., inductive coupling-based WPT, magnetic resonant coupling-based WPT, and electromagnetic radiation-based WPT,... Continue Reading
The energy generation and power consuming loads at Brass LNG facility located in Brass Island, Bayelsa State Nigeria were analyzed and compared with expected demand changes and means of minimizing cost and greenhouse gas emission were also proffered with wind and solar energy penetration into the overall power mix . The wind and solar hybrid power... Continue Reading
ABSTRACT This project intended to simplify the description and working principle of FM wireless microphone, which works on a fixed frequency modulation (FM) band. TABLE OF CONTENTS Approval Sheet Title Page Dedication Acknowledgement Abstract CHAPTER ONE 1.0INTRODUCTION 1.1Aim and Objective of Investigation CHAPTER TWO ... Continue Reading
INTRODUCTION A public address system is an electronics sound amplification and distribution system with a microphone, amplifier and loud speaker used to allow a person to address a large public. The public address system consists of three main parts namely, the microphone (input transducer), amplifier and the loudspeaker (output transducer). The... Continue Reading
ABSTRACT An Automated toll collection system is the system that helps in eliminating the heavy traffic caused in the Metropolitan countries. It is one of the flexible methods used to manage the flow of traffic in big cities of today. An Automated toll collection system is proposed, and the RFID technology is used. It is an innovative method that... Continue Reading
TABLE OF CONTENTS DECLARATION......................................................................................................................... i APPROVAL............................................................................................................................... ii... Continue Reading
TABLE OF CONTENTS DECLARATION................................................................................................................................. i APPROVAL....................................................................................................................................... ii... Continue Reading
Abstract Cowpea traders find the manual sorting process of cowpeas laborious and time-consuming. Based on the volume of cowpeas and the proportion of damaged cowpeas, the process can span a time interval of about 6 hours. This project integrates the power of computer vision and convolutional neural networks to develop a solution for the cowpea... Continue Reading