+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

Electrical Engineering Project Topics with Materials:

The availability and stability of electrical energy is necessary for domestic and industrial use. But unfortunately the monopoly which the Power holding company of Nigeria (PHCN) enjoys in this country is not in favor of the electricity users, because the supply is never constant and damages occur due to inconsistency of this supply is very... Continue Reading
  • Type:Project
  • ID:ELE0282
  • Pages:52
  • Reference:YES
Literature Review More peer-reviewed scientific studies on large-scale solar energy developments and operations are needed to adequately assess their impact (: solar electricity handbook September 2, 2013 ) Table of Contents i. Title Page……………………………………………………………………………… 1 ii. Table of... Continue Reading
  • Type:Project
  • ID:ELE0281
  • Pages:10
  • Reference:YES
ABSTRACT Blender is an electric machine for size reducing soft food or liquid mixture. Blender is some time called liquidizer consists of a glass jar or jug containing a steel blade assembly at the base driven by a small electric motor. Construction of blender was done based on the principle of size of reduction using electric motor as the major... Continue Reading
  • Type:Project
  • ID:ELE0280
  • Pages:75
  • Reference:YES
ABSTRACT An oven is a heated enclosure for heating, baking or drying. An electric oven is a heating device used to heat materials to high temperature when electric current is passed through a high resistance heating element (coil or plate). Electric ovens can fine their application in many fields and area of discipline like factories, research... Continue Reading
  • Type:Project
  • ID:ELE0279
  • Pages:42
  • Chapters:5
  • Methodology:Scientific
  • Reference:NO
ABSTRACT This work is a power supply monitoring device that triggers a buzzer when the mains supply cuts off. Thus a diode (bridge rectifier diode) was used to convert the AC voltage to DC voltage and the 240v/12v AC mains power transfer was used with a bridge rectifier for rectification and a 470Nf filter capacitor C1 for the smoothing of the... Continue Reading
  • Type:Project
  • ID:ELE0278
  • Pages:38
  • Reference:YES
ABSTRACT Microcontroller based remote control system is a project design of a system that uses infra red transmission and reception principle to switch on or off other appliances. It is a wireless mode of switching appliances to a desired state. When a number is pressed in the transmitter section, the receiver section decodes the signal and... Continue Reading
  • Type:Project
  • ID:ELE0277
  • Pages:95
  • Reference:YES
Abstract Power failure or outage in general does not promote development to public and private sector. The investors do not feel secure to come into a country with constant or frequent power failure. These limit the development of industries. In addition there are processes that cannot be interrupted because of their importance, for instance... Continue Reading
  • Type:Project
  • ID:ELE0276
  • Pages:20
  • Reference:YES
The major aim and objective of this design [of a patient heartbeat and temperature monitor using RF.] is to help the doctors and family members to keep track of the heartbeat condition of their loved ones [as well as their body temperature] in the case of an abnormality in the health condition (for those with heartbeat defects and those that run... Continue Reading
  • Type:Project
  • ID:ELE0275
  • Pages:65
  • Reference:YES
ABSTRACT The advantage of cellular communication like GSM technology is a potential solution for such remote controlling activities. GSM-SMS technology can be used to control household appliances from remote places. Remotely, the system allows the home owner to monitor and control his house appliances via his mobile phone set by sending commands... Continue Reading
  • Type:Project
  • ID:ELE0274
  • Pages:59
  • Reference:YES
ABSTRACT This project presents a design and implementation of new advanced Securitypower control using Android power switch system that uses WiFi technology as anetwork infrastructure connecting its parts. The proposed system consists of twomain components; the first part is the server (web server), which presents systemcore that manages,... Continue Reading
  • Type:Project
  • ID:ELE0273
  • Pages:38
  • Reference:YES
This work is on design and Construction of Automated door security system with GSM notification. Is an electrical Electronics Engineering Project.... Continue Reading
  • Type:Project
  • ID:ELE0272
  • Pages:39
  • Reference:YES
BSTRACT Automatic door control is becoming popular due to its numerous benefits. Automatic door control refers to the control of doors and domestic features by just sensing the present of human being at door and automatically open the door with the persons interface or by remote control. Artificial I ntelligence provides us the framework to go... Continue Reading
  • Type:Project
  • ID:ELE0271
  • Pages:34
  • Reference:YES
ABSTRACT Power inverter is an electrical appliance that can be used with DC battery as an alternativesource of energy supply in the event of power failures and energy crisis. It is cheap, clean,very conducive and silent when in operation and a very reliable source of power supply as togenerator. Modern research and technologies have shown that... Continue Reading
  • Type:Project
  • ID:ELE0270
  • Pages:36
  • Reference:YES
Research and optimization of cooling of electronic components using heat sinks becomes increasingly important in modern industry. Numerical methods with experimental real world verification are the main tools to evaluate efficiency of heat sinks or heat sink systems. In this research, the physical problems associated with heat removal of... Continue Reading
  • Type:Project
  • ID:ELE0269
  • Pages:51
  • Reference:YES
The mathematical model of diesel engine and its speed regulation system are presented and computer simulation is conducted in Matlab software. Simulation results verify that the proposed method improves the control accuracy of speed of diesel engine. A fuzzy PID hybrid controller and a Genetic Algorithm PID of parameter self-adjusting is put... Continue Reading
  • Type:Project
  • ID:ELE0268
  • Pages:93
  • Reference:YES
ABSTRACT The aim of this project, the design and implementation of an RF communication link, is to design a communication link between a source and a destination and study the properties of the signal being generated by the source (generator). The area of interest in this work is how the signal suffers limitations like attenuation, interference... Continue Reading
  • Type:Project
  • ID:ELE0267
  • Pages:66
  • Reference:YES
Project The main aim of this system is to detect object that will be ahead of ultrasonic transducer. This application is very useful in areas like monitoring and also very useful in wild life photography. There are two main parts of the ultrasonic detector. First one is emitter that produces a 40kHz sound wave. Second... Continue Reading
  • Type:Project
  • ID:ELE0266
  • Pages:3
  • Reference:YES
Project The main aim of this system is to detect object that will be ahead of ultrasonic transducer. This application is very useful in areas like monitoring and also very useful in wild life photography. There are two main parts of the ultrasonic detector. First one is emitter that produces a 40kHz sound wave. Second... Continue Reading
  • Type:Project
  • ID:ELE0265
  • Pages:3
  • Reference:YES
ABSTRACT This project report describes the design and construction of an electronic door lock which uses a microcontroller as the main control unit. The project’s objective was to interface this microcontroller with an LCD, keypad and a DC motor. However, programming the PIC chip to perform a task like identifying an authorised user is also... Continue Reading
  • Type:Project
  • ID:ELE0264
  • Pages:49
  • Reference:YES
Abstract The project DESIGN AND CONSTRUCTION OF A 20-METRE DISTANCE REMOTELY CONTROLLED METAL DETECTOR is used for detecting metallic objects such as phones, bombs, and other metallic objects that are hidden from view. The design is based on the principle of the Resonant Frequency Oscillator (RFO) metal detectors in which oscillation is a function... Continue Reading
  • Type:Project
  • ID:ELE0263
  • Pages:10
  • Reference:YES
ABSTRACT This project deals with the design and development of restaurant order meal system, in order to reduce the number of staff. In meal ordering project, you can request for any kind of food or drinks available in the restaurant which contains the menu embedded in each button. Microcontroller is the central processing unit CPU of this project... Continue Reading
  • Type:Project
  • ID:ELE0262
  • Pages:35
  • Reference:YES
Abstract The project DESIGN AND CONSTRUCTION OF A 20-METRE DISTANCE REMOTELY CONTROLLED METAL DETECTOR is used for detecting metallic objects such as phones, bombs, and other metallic objects that are hidden from view. The design is based on the principle of the Resonant Frequency Oscillator (RFO) metal detectors in which oscillation is a function... Continue Reading
  • Type:Project
  • ID:ELE0261
  • Pages:10
  • Reference:YES
ABSTRACT This project deals with the design and development of restaurant order meal system, in order to reduce the number of staff. In meal ordering project, you can request for any kind of food or drinks available in the restaurant which contains the menu embedded in each button. Microcontroller is the central processing unit CPU of this project... Continue Reading
  • Type:Project
  • ID:ELE0260
  • Pages:35
  • Reference:YES
Content Pages DECLARATION ii ACKNOWLEDGEMENT iii DEDICATION iv TABLE OF CONTENT v CHAPTER ONE Introduction 1 1.1 Background of the Study 1 1.2 Problem of Study 2 1.3 Objectives of Study 3 1.4 Scope of Study 3 1.5 Significance 4 CHAPTER TWO Literature Review 5 2.1 Introduction 5 2.2 Types of Street Lights 6 2.3 Photovoltaic Effect/Process 9 2.4... Continue Reading
  • Type:Project
  • ID:ELE0259
  • Pages:30
  • Reference:YES
Content Pages DECLARATION ii ACKNOWLEDGEMENT iii DEDICATION iv TABLE OF CONTENT v CHAPTER ONE Introduction 1 1.1 Background of the Study 1 1.2 Problem of Study 2 1.3 Objectives of Study 3 1.4 Scope of Study 3 1.5 Significance 4 CHAPTER TWO Literature Review 5 2.1 Introduction 5 2.2 Types of Street Lights 6 2.3 Photovoltaic Effect/Process 9 2.4... Continue Reading
  • Type:Project
  • ID:ELE0258
  • Pages:30
  • Reference:YES