Recent Chemical Engineering Project Topics and Materials (Page 11)

ABSTRACT It is proposed to design a process plant that will control nitrogen oxide emission from a plant that is producing 90wt% nitric acid of 30,000 tonnes of nitric acid. This capacity is based on 8000hours of operation per year i.e. 330 days. It is proposed that this plant will be located in any location where there is substantial release of... Continue Reading

ABSTRACT Plastic and Rubber materials have become the corner stone of our lives, so it leads to generation of huge quantity of waste. These waste materials are either mixed with municipal solid waste or dumped in an open area leading to increase in the area covered under waste land. Plastic and rubber waste, if not recycled is either land filled... Continue Reading

Silicon dioxide , also known as silica (from the latin silex), is an oxide of silicon with the chemical formula SiO2, most commonly found in nature as quartz and invarious living organisms. In many parts of the world, silica is the major constituent of sand. Silica is one of the most complex and most abundant families of materials existing as a... Continue Reading

ABSTRACT Phytochemicals are chemical compounds produced by plants, generally to help them thrive or thwart competitors, predators, or pathogens. These chemicals are produced by plants through primary or secondary metabolism (Breslin A,2017) . These work was done to determining the presence of phytochemicals such as Tannins, Saponin, Alkaloids,... Continue Reading

ABSTRACT This project was carried out to ascertain whether the local palm oil met the required standard.  The analytical test carried out include the free fatty acid test the acid value, iodine value moisture, content, saponfication value, peroxide value, specific gravity, colour and viscosity. The specific gravity of the oil sample was... Continue Reading

ABSTRACT The research titled extraction and characterization of watermelon seed oil was carried to investigate the effect that different drying methods, solvents and seed size would have on the quality and quantity of oil from watermelon ( Citrilus lanatus ) seeds. The watermelon seeds were removed from the pod and washed. The sample was weighed... Continue Reading

TABLE OF CONTENTS ACKNOWLEDGMENTS………………………………………………………..………ii LIST OF TABLES……………………………………………………………….……….v LIST OF FIGURES………………………………………………………………………vi... Continue Reading

ABSTRACT A vegetable oil is a triglyceride extracted from a plant. Such oils have been part of human culture for millennia. The term \'vegetable oil\' can be narrowly defined as referring only to substances that are liquid at room temperature, or broadly defined without regard to a substance\'s state of matter at a given temperature. For this... Continue Reading

ABSTRACT Plants are important in our everyday existence. They provide our foods, produce the oxygen we breathe, and serve as raw materials for many industrial products such as clothes, foot wears and so many others. Plants also provide raw materials for our buildings and in the manufacture of biofuels, dyes, perfumes, pesticides, adsorbents and... Continue Reading

ABSTRACT According to the modern or dynamical Theory of heat: Heat a form of energy. The molecules of a substance are in parallel motion. The mean Kinetic energy per molecules of the substance is proportional to its absolute temperature. In description of heat, a molecule may consist of one or two or many atom depending upon the nature of the gas.... Continue Reading

ABSTRACT The project dealt on the production of yam flour from yam chips. The yams were peeled and washed, 100grams samples coded sample A to G were subjected to two different drying conditions. Some were dried using the sun drying method while the others were dried through oven drying method kept at constant temperature of 500C, sodium... Continue Reading

ABSTRACT The effect of concentration of hydrochloric acid on hydrolysis of cellulose (sawdust) to glucose was studied on this research project and the steps obtained to achieve this project involved treatment of saw-dust (cellulose) with different concentrations of the acid at constant temperature of 80°... Continue Reading

ABSTRACT This research project studied on the kinetics of hydrolysis of cellulose to glucose. The steps employed to achieve this project involved extraction of cellulose from sawdust and subsequently, hydrolysis of starch to simple sugar. This was followed by glucose analysis. Different experiments were conducted during acid hydrolysis to study... Continue Reading

ABSTRACT This work studied the refining of crude palm kernel oil derived from the kernels within the nut of a palm fruit. This research project was aimed at reducing the non-glycerides present in oil in their crude form using an alkali method of refining. The crude palm kernel oil was first washed with distilled water by heating the mixture in an... Continue Reading

ABSTRACT This project work studied the refining of crude soya bean oil extracted from soya bean seed using alkali /caustic refining method. The work was carried out using phosphoric acid for the degumming /pretreatment process and sodium hydroxide for the neutralization /refining of the oil. Certain tests were carried out on both the crude and... Continue Reading

ABSTRACT The purpose of this work was to study the effect of chemical surface properties of activated carbons for their use in water purification. To achieve this objective, activated carbon in both granular and powdered forms namely: as received and devolatilized carbons were prepared. Proximate analysis of the carbon materials was performed.... Continue Reading

ABSTRACT A comparative investigation was undertaken to determine the head loss coefficients for horizontally mounted and vertically mounted orifices using a Fluid mechanics and Heat transfer trainer developed in Nigeria. Experiments were carried out observing the procedure and the discharge of the flow of water was collected to obtain the... Continue Reading

ABSTRACT Perfume extraction refers to the extraction of aromatic compounds from raw materials, using methods such as distillation, solvent extraction, expression or enfleurage. The extracts are either essential oils, absolutes, concretes, or butters, depending on the amount of waxes in the extracted product. Heat, chemical solvents, or exposure to... Continue Reading

ABSTRACT The word perfume derives from the latin ―per fumum‖ meaning through smoke, is fragrant liquid that is sprayed or rubbed on the skin or clothes to give a pleasant smell. Extraction of perfume from various plants resources is of ancient origin. Infact the natives from different tropical regions of the globe have long been extracting oil... Continue Reading

ABSTRACT This project was done to extract and characterize bean oil according to their particle sizes. The experiment was carried out using scent bean (i.e. ‘Ozaki’, ‘Ijilizi’or ‘Azamu’) as sample. The oils were extracted by solvent extraction /leaching extraction using n-hexane. Proximate analysis was carried out to obtain percentage... Continue Reading

ABSTRACT This study is a comparative analysis of the use of coal, fuel oil and natural gas for cement production noting their physical and chemical properties, cost and availability, impact on the environment and human health. Out of the seven cement manufacturing industries in Nigeria, three industries use these fuels were selected for the study.... Continue Reading

ABSTRACT Activated carbon, also widely known as activated charcoal or activated coal is a form of carbon which has been processed to make it extremely porous and thus to have a very large surface area available for adsorption or chemical reactions (Mattson et al., 1971). The word active is sometimes used in place of activated. It is characterized... Continue Reading

ABSTRACT Biomass, particularly agricultural residues seem to be one of the most promising energy resources for developing countries (Patomsok, 2008). Rural households and minority of urban dwellers depend solely on fuel woods (charcoal, firewood and sawdust) as their primary sources of energy for the past decades (Onuegbu, 2010). Of all the... Continue Reading

ABSTRACT The research project studies the analysis of pear and its oil. The mesocarp from edible African pear “DacryodesEdulis” were evaluated for their oil yield. The pulp from this pear were oven dried at 100oC-105oC to a moisture content level of 29%.The mesocarp was subjected to proximate analysis to determine the percentage of the... Continue Reading

ABSTRACT Air pollutions pollutant showed that the extent of spreading depends on the motor vehicle traffic population of the area. This pollution strongly generated through combustion of fossil fuels presents difficult environmental challenge to societies as it could degrade the environment and affect human health and quality of life. Vehicular... Continue Reading