Most Read Chemical Engineering Project Topics and Materials (Page 11)

ABSTRACT The 20000 liters storage tank was constructed for effective storage and conservation of third with three (3) mild steel sheet of 14 gauge (2mm) thickness. The construction started by marketing out 1½ (One and half) mild steel of 2440 Mm by 113Mmusing metal meter rule and critter the already market out dimension underwent cutting with a... Continue Reading

ABSTRACT Phytochemicals are chemical compounds produced by plants, generally to help them thrive or thwart competitors, predators, or pathogens. These chemicals are produced by plants through primary or secondary metabolism (Breslin A,2017) . These work was done to determining the presence of phytochemicals such as Tannins, Saponin, Alkaloids,... Continue Reading

The spread of pollutant in an area is partly a function of wood burning in local kitchens by the population of the area. This pollution generated through combustion of wood  fuels presents difficult environmental challenges to societies as it could degrade the environment and affect human health and quality of life. Wood burning emissions are... Continue Reading

ABSTRACT The general approach to any design of a process plant involve an advanced network of chemical engineering process. Absorber is a process plant or equipment that are used in the purification of gas or separation of unwanted gas from the mixture when it comes in contact with the liquid. In this models mass transfer reaction and equilibrium... Continue Reading

ABSTRACT This study has its theme as a utilization studies of Enugu coals with the view of studying its properties, classification, preparation storage etc comparing coals obtained from different locations. The Enugu coal is a sub-bitummous and non coking coal. It is very rich in waxes and resins, thus it may be suitable for the production of... Continue Reading

ABSTRACT The  adsorptive  removal  of  the  colour  pigment  (due  to  high  content  of  carotenoids)  from  palm oil  using  ortho-phosphoric  acid  activated  kaolin  clay  was  investigated  in  this  research.  The clay  was  activated  at  different  acid  concentrations  to improve  its  adsorptive... Continue Reading

In preparation and characterization of adsorbent obtained from corn curbs, potassium hydroxide was used as an activating agent at ratio of 1:1, 7:8 and 3:4 with the corn curbs and their pH values were found to be 8.5, 8.03 and 8.0 respectively, ash content were found to be 41.56, 46.78 and 48.31wt%. The BET surface area values were 17.762461,... Continue Reading

ABSTRACT The 20000 liters storage tank was constructed for effective storage and conservation of third with three (3) mild steel sheet of 14 gauge (2mm) thickness. The construction started by marketing out 1½ (One and half) mild steel of 2440 Mm by 113Mmusing metal meter rule and critter the already market out dimension underwent cutting with a... Continue Reading

Team Oil from [the] Soil is comprised of a group of senior chemical engineers at Calvin College who are proposing an alternative method to producing biodiesel. This alternative entails converting the oil found in seeds from the Jatropha Curcas plant into biodiesel.  Team Oil from [the] Soil plans to design and optimize a full scale plant that... Continue Reading

ABSTRACT This project was carried out to ascertain whether the local palm oil met the required standard.  The analytical test carried out include the free fatty acid test the acid value, iodine value moisture, content, saponfication value, peroxide value, specific gravity, colour and viscosity. The specific gravity of the oil sample was... Continue Reading

Crude oil viscosity is an important parameter which is considered in both porous media and in pipeline channels. Estimating oil viscosity at various operating conditions of pressure and temperature is of great value to petroleum engineers. In petroleum and reservoir engineering, we are often faced with the analysis of processes which involve... Continue Reading

ABSTRACT The two most common condenser tube problems faced by industrial users are internal tube fouling and tube failure. Fouling can have a major impact on the generating efficiency or the capacity of the condenser while the tube leaks or failure can seriously impact unit availability and reliability. Fundamental understanding of the root... Continue Reading

ABSTRACT Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading

ABSTRACT Water Purification Unit or filtration unit is designed in way that it will give a nice result. Like in our filtration, we have sand and carbon filter that were responded to separate the suspended solid particles, odour  and taste of the water, which will give a very nice filtered water at the end of the filtration. This unit has no... Continue Reading

Silicon dioxide , also known as silica (from the latin silex), is an oxide of silicon with the chemical formula SiO2, most commonly found in nature as quartz and invarious living organisms. In many parts of the world, silica is the major constituent of sand. Silica is one of the most complex and most abundant families of materials existing as a... Continue Reading

ABSTRACT This research work shows us the potential benefits we may obtain from the computerization of the out-patient information system of the Hansa Clinic Enugu. The out-patient department otherwise called OPD is a place where the out-patient that is patients that receive treatment at the clinic without staying overnight, wait for the doctors to... Continue Reading

ABSTRACT The need for effective and efficient means of oil extraction has been a concern in recent time. Hence, this study aimed at the oil extraction from Moringa oleifera seeds using the Microwave-Assisted extraction method. The extraction process was modeled using Response Surface Methodology (RSM). Also, the evaluation of Moringa oleifera oil... Continue Reading

ABSTRACTA study on the effects of post- harvest variables on the yield and quality of Shea butter wascarried out. The Shea nuts acquired from villages were divided into five batches with avillage/uncontrolled sample. Each batch was boiled at different time ranges (0, 15, 30, 45 and60) minutes. Each batch was dried through an oven drying method.... Continue Reading

ABSTRACT The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow... Continue Reading

ABSTRACT The research project studies the analysis of pear and its oil. The mesocarp from edible African pear “DacryodesEdulis” were evaluated for their oil yield. The pulp from this pear were oven dried at 100oC-105oC to a moisture content level of 29%.The mesocarp was subjected to proximate analysis to determine the percentage of the... Continue Reading

ABSTRACT It is generally known that cement id produced from limestone, mar/clay and gypsum by the following three basic process- wet semi- wet aid dry process. The cost of exploiting the limestone: the major raw material constitute about 50% of the production cost which results in the high cost of cement. It therefore becomes imperative to bring... Continue Reading

ABSTRACT Cassava is considered as a potential source for the commercial production of bioethanol because of its availability and low market price. It can be used as a basic source to support large-scale biological production of bioethanol using microbial amylases. With the progression and advancement in enzymology, starch liquefying and... Continue Reading

Environmental pollution as a result of drilling and mining activities in areas where deposits of petroleum and oil are found, proved a great threat to the wellness of the fauna and flora as well as to the humans.  TABLE OF CONTENTS  Background of study literature review Oil pollution act of 1990 Diesel Chemical composition  Volatility of Diesel... Continue Reading

ABSTRACT According to the modern or dynamical Theory of heat: Heat a form of energy. The molecules of a substance are in parallel motion. The mean Kinetic energy per molecules of the substance is proportional to its absolute temperature. In description of heat, a molecule may consist of one or two or many atom depending upon the nature of the gas.... Continue Reading

ABSTRACT Generally, plastic is defined as long-chain organic material which can be formed into desired shape by the application of heat and pressure, also it extends to include so many organic metallic complexes and also certain long-chain inorganic material based principally on silicon, phosphorus, nitrogen, aluminum or boron or mixtures of... Continue Reading