Project Topics and Materials - Page 827

ABSTRACTS This project was aimed at producing a fine high quality toilet soap at a low cost which will be of used to home and commercial purposes. The toilet soap produced has its major components caustic potash, palm kernel oil (pKo) caustic soda and soda ash. Other additives are perfume, coaming agent, sodium tripotiphosphate (STPP), colour,... Continue Reading

ABSTRACT It is generally known that cement id produced from limestone, mar/clay and gypsum by the following three basic process- wet semi- wet aid dry process. The cost of exploiting the limestone: the major raw material constitute about 50% of the production cost which results in the high cost of cement.  It therefore becomes imperative to bring... Continue Reading

ABSTRACT This project “Extraction of oil from a local seed (groundnut oil) and Characterization” was carried out using ten cups of groundnut seeds that was purchased from a local market in Enugu metropolis.  The oil these seeds were in Enugu using solvent extraction method.  Two different solvents were used in the extraction namely: Ethane... Continue Reading

ABSTRACT The production of cassava flour by the method of traditional processing method (sun drying) and modern processing method (oven drying) was carried out using cassava sliced cubes or peeled cassava. Indeed, the traditional Nigeria techniques of cassava flour production was studied with a view of achieving same product mechanically. Result... Continue Reading

ABSTRACT This project is on the production of paint from the available materials.  The first process involved was the sourcing of the available material which include calcium carbonate (dotonute) water etc.  the next step is the proper production procedure.  The  same product patterns was employed while the production was valued with a view to... Continue Reading

ABSTRACT This project is aimed at producing black and brown polish of good quality.  For clearity, polish is a substance rubbed on the surface of materials to make them smooth and shiny. Polish has being of immense importance in protecting leather surfaces and enhancing their beauty. To produce a standard polish, hard waxes such as carnduba wax,... Continue Reading

ABSTRACT This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials.  The local raw material were subjected to various processing conditions in order to obtain purified perfume.  The methods generally used in this work include expression steam distillation and solvent... Continue Reading

ABSTRACT This project “The Production of Ceiling Board from Local Raw Materials” was carried out basically using raw materials which was sourced locally. These raw materials are found to be very much in abundance. Some are materials sourced from the ground and others are from agricultural wastes. Three different types of ceiling boards were... Continue Reading

ABSTRACT Adhesive is a substance that holds materials together by surface attachment, while wood adhesive is a substance that is used to hold plywood for furniture works. This substance is essential and has universal applications. Thus the aim of this research work is to produce it using cassava starch as a base binder. Starch is also used in... Continue Reading

ABSTRACT A project was carried out to produce high quality liquid air refreshner for domestic uses. The project was carried out using the following apparatus. Beakers (250ML), one conical flask, hydrometer, thermometer, two – 5ml of measuring cylinders, one reactor (plastic reactor), stirrer, weighing balance. The chemicals used in the... Continue Reading

ABSTRACT Generally, plastic is defined as long-chain organic material which can be formed into desired shape by the application of heat and pressure, also it extends to include so many organic metallic complex and also certain long-chain inorganic material based principally on silicon, phosphorus, nitrogen, aluminum or boron or mixtures of these.... Continue Reading

ABSTRACT Wheelbarrow can be defined as a machine that is used by labourers, farmes, gardeness, and others for transporting loads to heavy by hand it from one place to another. However, materials used for construction purpose are bought in standard sizes wither in long bars or standard sheet sizes.  Moreover, depending on the type to be... Continue Reading

ABSTRACT Industrial wastewater treatment covers the mechanisms and process used to treat water that have been contaminated in some way by anthropogenic industrial or commercial activities prior to its release into the environment or its re-use.         Water is a natural and inorganic solvent with the composition of hydrogen and oxygen only... Continue Reading

ABSTRACT This research work was arrived as the formulation and production of ethanol (ethyl alcohol) from the fermentation of palm wine. A fresh palm wine was ated which was obtained  from Emene in Enugu State.  The characteristics that was tested before and after fermentation were; specific gravity, refractive index and PH value of the... Continue Reading

Abstract The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the chosen mild steel are;... Continue Reading

ABSTRACT In this construction of metal shelf, mild steel was chosen due to its inherit duties. The undismountable metal shelf, which has four compartments and four partition was constructed under the following processes. This  includes drawing and dimensioning of the proposal metal. Metal shelf, market surveying and procurement of the needed... Continue Reading

ABSTRACT The construction of propeller agitator used for agitating and mixing of low viscous fluid was fabricated in the mechanical workshop of the institute of management and technology Enugu. In the construction, galvanized mild steel was chosen due to its inherent properties.  After procurement, the following constructional operations were... Continue Reading

ABSTRACT The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the chosen mild steel are;... Continue Reading

ABSTRACT         A Juice extractor machine is a device that is used to extract liquid (Juice) from fruits and vegetables in a process called juicing. The machine is constructed manually with the use of local materials and tools.  The material used for the construction of the machine is mild steel sheet. During the construction of the... Continue Reading

ABSTRACT           Wheel barrow can be defined as a simple machine used in transferring heavy loads materials from one place to another by pushing. It can be used or serve as farm equipment, industrial equipment and for other purpose.           How ever, mateials used for the cnstruction of wheelbarrow are bought in standard... Continue Reading

ABSTRACT This project work is on the bleaching of palm oil using activated charcoal. The charcoal used for this work was made from pieces of animal bone by carbonization method.  It was then activated into two different samples.  Firstly, the basic sample was activated using anaphoric acid (H2 s04) while the other was activated by just heating... Continue Reading

ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint: water, titanium iv oxide, calcium carbonate, kaoline, calgon, natrosol, biocide P.V.A, ammonia,... Continue Reading

ABSTRACT Comparative analysis  of water was  carried out on well water, stream and pipe born water obviated within Emene locality of Enugu state the sample were subjected to some analytical tests final like presumptive tests, comfirmative test final like presumptive tests, comfirmative test, completed test, indole test and plate count for the... Continue Reading

ABSTRACT Urine Sample  from pregnant  women were analysed for bacteriuria. The result of irinalysis reveals the appearance –yellow and Cloudy, pH 6.0, protein-ve, Glucose-ve,Blood-ve, Urobilinogen. Normal, Ketone-ve, Nitrate tve, Bilirubin-ve, Ascobic acid –ve in some of the samples. The result  of urine microscopy reveal pus cells. ... Continue Reading

ABSTRACT The prevalence of streptococcus pneumonia in pneumonia patients using university of Nigeria Teaching Hospital (UNTH) Enugu as a case study was carried out based on the fact of the pneumonia is one of the commonest afflictions of the aged people and children worldwide. A total of 50 samples were collected. 12 (24%) of the sample were from... Continue Reading