Most Read Chemical Engineering Project Topics and Materials (Page 6)

ABSTRACT The construction of the callophane sealing machine was carried out. The project started with an encompassing review of the various methods of heat sealing film packages. The machine can be used in sealing both low, medium and high-density cellophane. The product has a heating element, which... Continue Reading

ABSTRACT The construction of the 500 gallous (2,250 litre) of water is a project which has definite mathematical patterns. The choice of a cylindrical pattern of design involved the application of mathematical deductions to analyse the size of materials required. The introductory and scope... Continue Reading

ABSTRACT The construction of the callophane sealing machine was carried out. The project started with an encompassing review of the various methods of heat sealing film packages. The machine can be used in sealing both low, medium and high-density cellophane. The product has a heating element, which... Continue Reading

ABSTRACT The repair of the fixed bed adsorption column, a product of arm field technical company was carried out for the purpose of bringing the faulty equipment back to its normal operating system. Before this exercise, the equipment was out of operation because of the completely blocked base of the fixed... Continue Reading

ABSTRACT The construction of Sieve Industrial Sieve Compartment was carried out in the Engineering Workshop, Institute of Management and Technology, Enugu. The aim of this project is to fabricate an industrial sieve compartment which is capable of separating solid particles of various sizes. The... Continue Reading

ABSTRACT This project research work was based on dehydration of ethanol water solution using activated starch. The extracted starch obtained was of whistler method. The starch obtained from potato was weighed with the use of a weighing balance, 0.1gram of activated starch weighted for... Continue Reading

Abstract The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties... Continue Reading

ABSTRACT The design and construction of s refrigerating unit is handled from the knowledge of the working principles of laws of thermodynamics. The size of the containing vessel i.e the case as established to be of 45cm by 32 cm in dimension. The Angle iron mild steel to used in the fabrication and... Continue Reading

Chapter One 1.0  INTRODUCTION The edible fruit of watermelon (Citrullus lanatus) belongs to the family Cubitaceae . The fruit contains many obovate, smooth compressed seeds thickened at the margin and of a black or yellowish white colour. Watermelon plays a very important role in Africa as it is used to quench thirst when there is shortage of... Continue Reading

ABSTRACT The aim of this project was to construct a steel cupboard in order to help us acquire the knowledge of fabrication of a modern cupboard and the essence of it. Also to enable us (the students of chemical Engineering) to know how to construct as future engineers. The construction of steel cupboard was done... Continue Reading

ABSTRACT The steel-shelf was constructed at the mechanical engineering workshop of the institute. It was done by first of all making out the dimension with the scribers, cutting, wielding, dittoing, assembling and painting. The method ology involved the preliminary calculation of the total surface area of the two mili... Continue Reading

ABSTRACT The production of cassava flour by the method of traditional processing method (sun drying) and modern processing method (oven drying) was carried out using cassava sliced cubes or peeled cassava. Indeed, the traditional Nigeria techniques of cassava flour production was studied with a view of achieving same product mechanically. Result... Continue Reading

CHAPTER ONE INTRODUCTION Background of the Study Water is a limited natural resource and fundamental for life and  health  (UNWWDR,  2002). About 97.5% of all water on earth is salt water and the remaining 2.5% is fresh water. Around 70% of fresh water is frozen in... Continue Reading

ABSTRACT The construction of this vertical fire tube boiler was carried out both at the industrial center and Mechanical Engineering workshop of the Institute of Management and Technology (IMT), Enugu. The boiler contains 2 steam tubes at triangular pitch which are enclosed in a shell. Water is... Continue Reading

CHAPTER ONE 1.0 INTRODUCTION The equipment mostly used in the industries and manufacturing establishments requires the production of definite shape, pattern, different design, embossments and others, are usually moulds. The ability of moulds to withstand pressure, distortion and corrosion determines the... Continue Reading

CHAPTER ONE 1.0 INTRODUCTION The equipment mostly used in the industries and manufacturing establishments requires the production of definite shape, pattern, different design, embossments and others, are usually moulds. The ability of moulds to withstand pressure, distortion and corrosion determines the... Continue Reading

ABSTRACT Spray substance are used to make home grnow powered substance whose particles are usually spherical in shape and approximately 10-40 micro s. The maintenance of pilot plant spray dryer was stated with observation of the faults in the spray dryer. The faulty components were dismantled, serviced and... Continue Reading

ABSTRACT This project “Extraction of oil from a local seed (groundnut oil) and Characterization” was carried out using ten cups of groundnut seeds that was purchased from a local market in Enugu metropolis.  The oil these seeds were in Enugu using solvent extraction method.  Two different solvents were used in the extraction namely: Ethane... Continue Reading

ABSTRACT Interface on petroleum product in multi-purpose pipeline system refers to as the zone of demarcation between two products where mixing occurs. Generally, interface is a boundary layer, so the boundary between two products when they are pumped in... Continue Reading

CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY To understand the web-based legal practitioner application system, it includes not merely the profession, which is practiced in courts but also covers law teaching, law research, administration in different branches where law plays a role and in... Continue Reading

CHAPTER ONE INTRODUCTION 1.1 Background Perfume is a fragrant liquid made from an extract that has been distilled in alcohol and water. Since the beginning of recorded history, humans have attempted to mask or enhance their own odor by using perfume, which emulates nature’s pleasant smells. Many natural and man-made materials have been used to... Continue Reading

ABSTRACT This project is aimed at producing black and brown polish of good quality.  For clearity, polish is a substance rubbed on the surface of materials to make them smooth and shiny. Polish has being of immense importance in protecting leather surfaces and enhancing their beauty. To produce a standard polish, hard waxes such as carnduba wax,... Continue Reading

ABSTRACT This project “Extraction of oil from a local seed (groundnut oil) and Characterization” was carried out using ten cups of groundnut seeds that was purchased from a local market in Enugu metropolis.  The oil these seeds were in Enugu using solvent extraction method.  Two different solvents were used in the extraction namely:... Continue Reading

ABSTRACT The production and analysis of “Ngu” extract for temperature and water requirement for leaching of casuistic alkali is the basic objective of this project. The production was carried out by using unit operations and also using the female inflorescence of a palm fruit (Eleasis Guineesis) as raw material. The female... Continue Reading

ABSTRACT. The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps. In soap production, cold process was used and this was found out to be the most effective means of production... Continue Reading