Most Read Chemical Engineering Project Topics and Materials (Page 4)

ABSTRACT Blender is an electric machine for size reducing soft food or liquid mixture. Blender is some time called liquidizer consists of a glass jar or jug containing a steel blade assembly at the base driven by a small electric motor. Construction of blender was done based on the principle of size of reduction using... Continue Reading

ABSTRACT In the construct of 2,000 litres capacity water reservoir galvanized steel sheet forms the tank and an angle iron rod forms the stand. Two full length galvanized sheet were marked out and cut out to the required sizes. The work stated by cutting the it gauges galvanized steel sheets... Continue Reading

ABSTRACT This study was carried out to extract oils from cashew nut and to characterized oils with the view to ascertain their suitability for consumption and other uses. Soxhlet apparatus was used for its extraction using ethanol as solvent. The physical and chemical properties of the extracted oil were analyzed. The percentage oil extracted from... Continue Reading

ABSTRACT This study has its theme as a utilization studies of Enugu coals with the view of studying its properties, classification, preparation storage etc comparing coals obtained from different locations. The Enugu coal is a sub-bitummous and non coking coal. It is very rich in waxes and resins, thus it may be... Continue Reading

CONSTRUCTION OF A PILOT MOTORISED MIXER A REPORT PRESENTED TO THE DEPARTMENT OF CHEMICAL ENGINEERING OF THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY, ENUGU ABSTRACT A motorized mixer of 200 liters capacity was constructed to have the capability of mixing 200 liters of fluid during operation. The construction of the mixer involves the preliminary... Continue Reading

ABSTRACT The candle mould has twenty four (24) holes which could produce twenty four (24) quality candle sticks Aluminum, a non ferrous metal was used as the construction material for the mould the type of casting technique used was green sand mould method. In the process of moulding the... Continue Reading

ABSTRACT This research was carried out with the sole aim of monitoring interface in the transportation of petroleum pipeline products and the analysis of this product from Enugu depot. In the research it was observed that product contaminates each... Continue Reading

ABSTRACT The project topic was constriction of steel cupboard which the primary aim was to enable students know how cupboard can be constructed using steel and the factors to be considered while choosing a particular material for construction. The construction was carried out by drawing and sketching of the steel... Continue Reading

REPORT ON ABSTRACT The construction of sieves system was carried out in the Engineering workshop, Institute of management and technology, Enugu. The aim of this project is to fabricate a sieve system, which is capable of separating solid particles of various sizes. The construction was carried out in order to... Continue Reading

ABSTRACT This project research work was based on dehydration of ethanol water solution using activated starch. The extracted starch obtained was of whistler method. The starch obtained from potato was weighed with the use of a weighing balance, 0.1gram of activated starch weighted for... Continue Reading

SAFETY CONCERN IN LIQUEFIED PETROLEUM GAB ENVIRONMENT ABSTRACT This research work which is based on safety principles and practice in liquefied petroleum gas (LPG) environment. LPG which is a petroleum fraction produced by distillation of crude oil. It is a hugely versatile gas found over many million of years beneath the ground and it is... Continue Reading

THE POTENTIALS FOR A CO-OPERATIVE THRIFT CREDIT SOCIETY IN A HIGHER EDUCATION INSTITUTION (A CASE STUDY OF I.M.T, ENUGU) TABLE OF CONTENTS CHAPTER ONE 1.1 Background of the study/Introduction 1.2 Statement of Problem 1.3 Purpose of the Study 1.4 Scope of the Study 1.5 Significance of the Study 1.6 Definition of Term 1.7 Research Questions. CHAPTER... Continue Reading

ABSTRACT This project is on construction of size reduction equipment – manual grinder. It was constructed locally with the use of local materials and tools in I.M.T mechanical Engineering workshop. The various parts of the equipment were constructed separately using mild steel before finally coupled.... Continue Reading

ABSTRACT The construction of this vertical fire tube boiler was carried out both at the industrial center and Mechanical Engineering workshop of the Institute of Management and Technology (IMT), Enugu.The boiler contains 2 steam tubes at triangular pitch which are enclosed in a shell. Water is introduced... Continue Reading

ABSTRACT This project work, characterization of some branded motor oil was aimed at studying and analyzing the characteristics/properties of lubricating oils of various brands it also exphered the origin, properties, refining and exploration techniques of crude oil to produce variety of products such as... Continue Reading

ABSTRACT Industrial mixer is equipment designed to carryout operation involved the combination of two or more substance to achieve a uniform product. The method of fabrication of this mixer involves a preliminary computation of the dimensions of the standard which they will be used in marketing out cutting, out to... Continue Reading

ABSTRACT This project was carried using activated local form local corporation Enugu, and the rate of bleaching of palm oil using spectrophotometer by measuring the absorbance. It was also performed to check the suitability of local as a bleaching agent for palm oil. The local from local corporation... Continue Reading

ABSTRACT A mould can generally be defined as a pattern constructed for the production of the same shape and size. The constructional material differs from one operation to another. When one considers the money at hand, he decides whether to start from the primary production level or secondary... Continue Reading

REFINING OF VEGETABLE OIL WITH ENUGU COAL ABSTRACT This project was carried out using acid activated coal from Enugu coal and the production of ve4getablew oil was monitored using spectrophotometer to measure the absorbance. It was also perform to check the suitability of activated Enugu coal as a bleaching agent for palm oil. The Enugu coal... Continue Reading

ABSTRACT Water Purification Unit or filtration unit is designed in way that it will give a nice result. Like in our filtration, we have sand and carbon filter that were responded to separate the suspended solid particles, odour and taste of the water, which will give a very nice filtered water at the end of the filtration.... Continue Reading

ABSTRACT The project Analysis of Enugu Coal was done to determine the characteristic properties of Enugu Coal with particular emphasis on the proximate and ultimate analysis. Coal samples from the Enugu Coal (Onyeama) mine were obtained and pulverized. The coal sample (pulverized) was subjected to proximate and ultimate... Continue Reading

ABSTRACT This seminar topic “Solid Waste Management and Disposal system” is based on the research on what solid waste is all about, how it is managed and its methods of disposal systems. Research on this topic enable us to know that solid wastes are discarded solid materials such as scraps of plastic, rubbers nylon, paper, etc. Also, the... Continue Reading

ABSTRACT A mould can generally be defined as a pattern constructed for the production of the same shape and size. The constructional material differs from one operation to another. When one considers the money at hand, he decides whether to start from the primary production level or secondary... Continue Reading

ABSTRACT The project topic was constriction of steel cupboard which the primary aim was to enable students know how cupboard can be constructed using steel and the factors to be considered while choosing a particular material for construction. The construction was carried out by drawing and sketching of the steel... Continue Reading

ABSTRACT This project work was constructed to enable students of chemical engineering to learn how to carry out construction works. This was done to acquire knowledge about metal properties and its fabrication. It was also constructed to observe the various measures and operations carried out in the construction of... Continue Reading