PRODUCTION OF A HIGH QUALITY BAR SOAP AND COMPARE WITH DETERGENT.

  • Type: Project
  • Department: Chemical Engineering
  • Project ID: CNG0263
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 100 Pages
  • Methodology: descriptive
  • Reference: YES
  • Format: Microsoft Word
  • Views: 1.5K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT.
The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps.

In soap production, cold process was used and this was found out to be the most effective means of production considering several factors. In the production of bar soaps, palm kernel oil was used instead of fallow or grease. This is because palm kernel has a low titre value and gives a quicker lather and the fallow or grease gives a high titre value which produce soap that is slow to dissolve at low temperature. Different formulation were made and it was found out that the best ratio for a high quality soap is 2:1 of palm kernel to caustic soda respectively. Carrying out test on soap produced were saponification value of P.K.O to be 248.24 refractive index 1.45, free fatty acid value of 1.56, acid value of 3.5, moisture content of soap 35.29%, percentage free alkaline 0.4% alcohol insoluble matter of 1.43% and PH value of 8.80 at a temperature reading of 30.00.
The synthetic detergent which was developed to replace the soapy detergent has a better quality. It was prepared by a sulphonation reaction when this reaction is carried out, a detergent paste is formed which when builders and other additives were added, it then form detergent which was size reduced and seized.
The sieved detergent was dried by solar energy. From the project, it was discovered that (STPP) helps the detergent to reduce water hardness sequestering calcium ion and heavy metal ion water, could increase the cleaning action of detergent. And also the hydrogen peroxide acts as stain removal due to its bleaching action, the CMC acts as anti-redeposition agent.

The high quality bar soap was found to contain certain materials which limit the formation of scum in hard water and this ascertained that the synthetic detergent is not more effective than bar soap when washing and moreover bar soap does not change the colour of a material when washing but detergent does by bleaching the colour.
 
TABLE OF CONTENT
TITLE PAGE
LETTER OF TRANSMITTAL
APROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT

CHAPTER ONE
INTRODUCTION

CHAPTER TWO
LITERATURE REVIEW 

CHAPTER THREE
EXPERIMENTAL PROCEDURE


CHAPTER FOUR
EXPERIMENTAL CALCULATION

CHAPTER FIVE
EXPERIMENTAL RESULTS AND ANLYSIS

CHAPTER SIX
DISCUSSION

CHAPTER SEVEN
CONCLUSION
RECOMMENDATION
REFERENCES
APPENDIX.
 

PRODUCTION OF A HIGH QUALITY BAR SOAP AND COMPARE WITH DETERGENT.
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Chemical Engineering
  • Project ID: CNG0263
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 100 Pages
  • Methodology: descriptive
  • Reference: YES
  • Format: Microsoft Word
  • Views: 1.5K
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Chemical Engineering
    Project ID CNG0263
    Fee ₦5,000 ($14)
    Chapters 5 Chapters
    No of Pages 100 Pages
    Methodology descriptive
    Reference YES
    Format Microsoft Word

    Related Works

    ABSTRACT. The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps. In soap production, cold process was used and this was found out to be the most effective means of production... Continue Reading
    ABSTRACT. The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps. In soap production, cold process was used and this was found out to be the most effective means of production... Continue Reading
      ABSTRACT It might be patient for the purpose of given the subject a vivid understanding on the need for quality control  in  a manufacturing organization . The chapter one of this project comprises of the general  introduction , historical  background  of the  organization  chart , showing the  department  and position  statement... Continue Reading
    TABLE OF CONTENTS Title page                                    Certification                                                i Dedication                                                            ii... Continue Reading
    ABSTRACT The research work is basically concerned with the international procurement and its justification. The research work covers the purchasing activities of Global Soap and Detergent Industry limited Ilorin. International buying is the procurement activities which involved source and obtaining needs or requirement from a foreign country for... Continue Reading
    ABSTRACT This projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection. Various factors affected the quality of the soap produced. These include the method used in production, types and nature of oils used, the percentage of the additives... Continue Reading
    ABSTRACT The production of high quality foam was carried.  The actualization of the production of polyurethane (fibre) foam was made possible by using the components / chemical raw materials such as polyol (polyurethes resin).  TDI (toluene di-Iso-cyanate, methylane chloride (MC)-(CH2CL).  Silicon oil, stannous octoate, calcum carbonate and... Continue Reading
    ABSTRACT The production of high quality foam was carried. The actualization of the production of polyurethane (fibre) foam was made possible by using the components / chemical raw materials such as polyol (polyurethes resin). TDI (toluene di-Iso-cyanate, methylane chloride (MC)-(CH2CL). Silicon oil, stannous octoate, calcum carbonate and water. As... Continue Reading
    ABSTRACT The production of high quality foam was carried.  The actualization of the production of polyurethane (fibre) foam was made possible by using the components / chemical raw materials such as polyol (polyurethes resin).  TDI (toluene di-Iso-cyanate, methylane chloride (MC)-(CH2CL).  Silicon oil, stannous octoate, calcum carbonate and... Continue Reading
    ABSTRACT The production of high quality foam was carried. The actualization of the production of polyurethane (fibre) foam was made possible by using the components / chemical raw materials such as polyol (polyurethes resin). TDI (toluene di-Iso-cyanate, methylane chloride (MC)-(CH2CL). Silicon oil, stannous... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us