+234 813 0686 500
[email protected]

Chemical Engineering Project Topics & Research Materials (PDF & DOC)

Browse over 503 Chemical Engineering project topics and complete research materials for B.Sc, HND, ND, and postgraduate students. All topics are well-researched and suitable for Nigerian universities and polytechnics :(Page 14)
Showing 326 - 350 of 503

326) The Viability Of Treating Waste Water Using Coagultion And Adsorption.

TABLE OF CONTENTS ACKNOWLEDGMENTS………………………………………………………..………ii LIST OF TABLES……………………………………………………………….……….v LIST OF FIGURES………………………………………………………………………vi... Continue Reading

327) Assessment Of Carbon Monoxide (co) Level In Enugu Metropolis Monitoring Industrial And Residential Area

Air pollutions pollutant showed that the extent of spreading depends on the motor vehicle traffic population of the area. This pollution strongly generated through combustion of fossil fuels presents difficult environmental challenge to societies as it could degrade the environment and affect human health and quality of life. Vehicular... Continue Reading

328) Analysis Of Bush Pear And Its Oil

The research project studies the analysis of pear and its oil. The mesocarp from edible African pear “DacryodesEdulis” were evaluated for their oil yield. The pulp from this pear were oven dried at 100oC-105oC to a moisture content level of 29%.The mesocarp was subjected to proximate analysis to determine the percentage of the... Continue Reading

329) The Study Of Properties Of Briquette Produced From Groundnut Shell Coal Blend

Biomass, particularly agricultural residues seem to be one of the most promising energy resources for developing countries (Patomsok, 2008). Rural households and minority of urban dwellers depend solely on fuel woods (charcoal, firewood and sawdust) as their primary sources of energy for the past decades (Onuegbu, 2010). Of all the... Continue Reading

330) A Comparative Study Of Chemical And Microwave Synthesized Activated Carborn From Corn Cob

Activated carbon, also widely known as activated charcoal or activated coal is a form of carbon which has been processed to make it extremely porous and thus to have a very large surface area available for adsorption or chemical reactions (Mattson et al., 1971). The word active is sometimes used in place of activated. It is characterized... Continue Reading

331) Comparative Analysis Of Coal, Fuel Oil And Natural Gas For Cement Production

This study is a comparative analysis of the use of coal, fuel oil and natural gas for cement production noting their physical and chemical properties, cost and availability, impact on the environment and human health. Out of the seven cement manufacturing industries in Nigeria, three industries use these fuels were selected for the study.... Continue Reading

332) Effect Of Particle Size On Oil Yield Using Scent Bean Seed (‘ozaki’).

This project was done to extract and characterize bean oil according to their particle sizes. The experiment was carried out using scent bean (i.e. ‘Ozaki’, ‘Ijilizi’or ‘Azamu’) as sample. The oils were extracted by solvent extraction /leaching extraction using n-hexane. Proximate analysis was carried out to obtain percentage... Continue Reading

333) Extraction And Formulation Of Perfume From Plant

The word perfume derives from the latin ―per fumum‖ meaning through smoke, is fragrant liquid that is sprayed or rubbed on the skin or clothes to give a pleasant smell. Extraction of perfume from various plants resources is of ancient origin. Infact the natives from different tropical regions of the globe have long been extracting oil... Continue Reading

334) Investigation Into The Effects Of Temperature On Itakpe Iron Concentrate Magneto Viscous Fluids

This research work show cases the potentials of Itakpe Iron concentrate for Magneto-rhelogical abilities. The concentrate was first ball milled to size reduce it then subjected to low magnetic strength from magnetic bits in-situ the magnetic fluid. It was determined that temperature affected the fluid inversely, as temperature increased... Continue Reading

335) Catalytic Conversion Of Polyethylene To Liquid Fuel And Solid Wax Using The (caoh2)

The objective of the work is the catalytic conversion of waste plastics into fuel oil and solid wax using Ca(OH)2 and the design of pyrolysis reactor. Plastic wastes such as, polypropylene, low density polyethylene, high density polyethylene, polystyrene are the most frequently used in everyday activities and disposed of to the... Continue Reading

336) Production And Characterization Of Briquette From Chat Residue

Briquette is a block of compressed materials suitable for burning. Briquettes can be made from low cost materials such as old newspaper, any bio mass wastes and agricultural residues. They can be used as fuel instead of charcoal, firewood or mineral coal and costs less. Depending on which materials were used to make the briquettes, they may burn... Continue Reading

337) Design Of Distillation Column

Azeotropic distillation of ethanol-water mixture is accomplished by adding a volatile third component to the liquid which changes the volatility of one of the two components more than the other so the components are separated by distillation. The two components to be separated often have similar boiling point components which do or do not... Continue Reading

338) Characterization Of Non-edible Oil From Waste Plant Materials For Producing Biodiesel

Oil obtained from orange peels and velvet tamarind nut by solvent extraction (n-hexane and acetone) using the soxhlet extractor were investigated as feedstock’s to determine some of the suitable parameters such as iodine value, saponification value, specific gravity, density, acid value and free fatty acid value, and their percentage... Continue Reading

339) Construction Of A Pilot Motorized Mixer

A motorized mixer of 200 liters capacity was constructed to have the capability of mixing 200 liters of fluid during operation. The construction of the mixer involves the preliminary measures and calculations on the surface area of the metal sheet. Some basic workshop practices was carried out during the construction such as the marking... Continue Reading

340) Construction Of A Simple Size Reduction Machine

This project (Construction Of A Simple Size Reduction Machine) It was constructed locally with the use of local materials and tools in I.M.T mechanical Engineering workshop. The various parts of the equipment were constructed separately using mild steel before finally coupled. During the construction, the conveyors and it’s housing... Continue Reading

341) Construction Of Kerosine Cooking Stove

The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the chosen mild steel are;... Continue Reading

342) Construction Of Office Table And Chairs

The aim of this project was to construct one office table and four chairs. In the course of this project the length of plank used was 12” and we used about 4 number (mahogany) of 1” thickness, ¾ plywood of 1 sheet of 1” thickness, as well as ¼” plywood of ½ and glue 1 tin wenner 1 rod, foam ½ sheet.... Continue Reading

343) Effect Of Interface On The Quality Of Petroleum Product In Multi Purpose Pipeline System

Interface on petroleum product in multi-purpose pipeline system refers to as the zone of demarcation between two products where mixing occurs.  Generally, interface is a boundary layer, so the boundary between two products when they are pumped in succession is known as interface. In Nigeria Petroleum Industries like NNPC (PPMC) make use... Continue Reading

344) Fabrication Of Briquette Stove

  This project is an equipment which been fabricated for the principle purpose of producing heat energy for commercial use by burning solid fuel like briquette.  The project which is the fabrication of briquette stove was made from preferentially selected engineering materials like mild steels of different gauge member and metallic rod.... Continue Reading

345) Fabrication Of Candle Mould With Twenty Four (24) Holes

The candle mould has twenty four (24) holes which could produce twenty four (24) quality candle sticks Aluminum, a non ferrous metal was used as the construction material for the mould the type of casting technique used was green sand mould method. In the process of moulding the pattern was placed in the flask which contained the green... Continue Reading

346) Formulation And Production Of Levera Soap

The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow... Continue Reading

347) Modification Of Proto-type Air Conditioning Unit

The need for an authentic and reliable report relating to the modification of a proto-type air-conditioning unit is inevitable. Many homes and offices use the air conditioner to cool the temperature in their respective homes and offices, so the maintenance of the air conditioner should be a top priority of every individual in order to... Continue Reading

348) Production Of Alkali Using Local Raw Material (palm Inforescence)

The project aims to develop a flow process to obtain the optimum temperature and time necessary for the maximum recovery of alkali present in palm inflorescence. On this ground, a preliminary experiment was performed. During this process, both male and female palm inflorescence were compared for maximum alkali production and it was... Continue Reading

349) Refurbishing Of A Fixed And Fluidized Bed

The repair of the fixed bed adsorption column, a product of arm field technical company was carried out for the purpose of bringing the faulty equipment back to its normal operating system. Before this exercise, the equipment was out of operation because of the completely blocked base of the fixed bed column (water column) and the... Continue Reading

350) Synthesis Of Activated Carbon From Enugu Coal

This project was carried out using coal sample from Onyeama coal mine Enugu, Enugu State.Activated coal was produced by carbonizing the coal and activating it using phosphoric acid at a temperature of 5500c. the degree of bleaching of raw palm oil was monitored using spectronic meter through absorbance measurement. The essence was to... Continue Reading
Cant find your topic in Chemical Engineering? Reach us on WhatsApp or call +234 813 0686 6500 .
Choosing the right Chemical Engineering project topic is essential for academic success. GrossArchive remains a trusted platform for students seeking quality project topics and complete research materials across multiple disciplines. Explore the available Chemical Engineering project topics on GrossArchive and complete your final year project with confidence.

Students researching Chemical Engineering project topics often explore related areas such as Accounting project topics, Business Administration and Management project topics, Economics project topics and Marketing project topics to broaden their research scope.

Quick Navigation Menu

Gross Archive
23 Agodogba Av, Park View
Ikoyi, Lagos State,
+ 234 813 0686 6500
+234 809 3423 853
[email protected]

Copyright © Gross Archive. All Rights Reserved
Gross Archive Limited:
whatsappWhatsApp Us