Chemical Engineering Project Topics & Research Materials (PDF & DOC)
Browse over 503 Chemical Engineering project topics and complete research materials for B.Sc, HND, ND, and postgraduate students. All topics are well-researched and suitable for Nigerian universities and polytechnics
:(Page 15)
The construction of the five (5) litre Electric Kettle was carried out in mechanical workshop of the Institute of Management and Technology Enugu. (I.M.T). The fabrication process, included measuring and marking out operations of which the following dimensions was taken; the cylindrical body was taken as 170mm by 700mm in height and... Continue Reading
The refurbishment of the fluid flow demonstration unit was carried out in the Chemical Engineering pilot plant laboratory of the Institute of Management and Technology Enugu. The refurbishment process was carried out to ensure adequate functioning of the unit, to allow the continuous use of equipment in the pilot plant, so that student... Continue Reading
The project Analysis of Enugu Coal was done to determine the characteristic properties of Enugu Coal with particular emphasis on the proximate and ultimate analysis. Coal samples from the Enugu Coal (Onyeama) mine were obtained and pulverized. The coal sample (pulverized) was subjected to proximate and ultimate analysis to determine its... Continue Reading
In the construct of 2,000 litres capacity water reservoir galvanized steel sheet forms the tank and an angle iron rod forms the stand. Two full length galvanized sheet were marked out and cut out to the required sizes. The work stated by cutting the it gauges galvanized steel sheets of full length into geometrical dimensions of the... Continue Reading
Blender is an electric machine for size reducing soft food or liquid mixture. Blender is some time called liquidizer consists of a glass jar or jug containing a steel blade assembly at the base driven by a small electric motor. Construction of blender was done based on the principle of size of reduction using electric motor as the major... Continue Reading
This project “production of plane mirror using local raw material†is meant to study the possibility of producing plane mirror using sand rich in silica as its major local raw material. Plane mirror is produced by casting one side of a sheet glass. Presently in Nigeria, sheet glass is not used easily produce and as such, the... Continue Reading
This study has its theme as a utilization studies of Enugu coals with the view of studying its properties, classification, preparation storage etc comparing coals obtained from different locations. The Enugu coal is a sub-bitummous and non coking coal. It is very rich in waxes and resins, thus it may be suitable for the production of... Continue Reading
The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint: water, titanium iv oxide, calcium carbonate, kaoline, calgon, natrosol, biocide P.V.A, ammonia,... Continue Reading
Water Purification Unit or filtration unit is designed in way that it will give a nice result. Like in our filtration, we have sand and carbon filter that were responded to separate the suspended solid particles, odour and taste of the water, which will give a very nice filtered water at the end of the filtration. This unit has no... Continue Reading
This project was Carrie lent using sub-bituminous coal and crude palm oil. The degree of bleaching of the palm oil was monitored with a spectorphoto meter. The coal was collected in a lump from the mine. It air-chiecl to removed the moisture content and thereafter, size reduced to a small particle size foe effective activation. The... Continue Reading
This project was carried out to ascertain whether the local palm oil met the required standard. The analytical test carried out include the free fatty acid test the acid value, iodine value moisture, content, saponfication value, peroxide value, specific gravity, colour and viscosity. The specific gravity of the oil sample was determined... Continue Reading
This report aimed at determining the presence and removal of mercaptan sulphur in kerosene using colour indicator method. It is known that impurities such as free sulphur, sulphur dioxide, marketers, finding materials etc. are found in petroleum products. Consequently, absorbents like molecular sieve, calcium oxide and even activated... Continue Reading
Generally, plastic is defined as long-chain organic material which can be formed into desired shape by the application of heat and pressure, also it extends to include so many organic metallic complexes and also certain long-chain inorganic material based principally on silicon, phosphorus, nitrogen, aluminum or boron or mixtures of... Continue Reading
Adhesive is a substance that holds materials together by surface attachment, while wood adhesive is a substance that is used to hold plywood for furniture works. This substance is essential and has universal applications. Thus the aim of this research work is to produce it using cassava starch as a base binder. Starch is also used in... Continue Reading
This research was carried out with the sole aim of monitoring interface in the transportation of petroleum pipeline products and the analysis of this product from Enugu depot. In the research it was observed that product contaminates each other if interface was not properly monitored and cut at the appropriate time. The three major... Continue Reading
This project “Extraction of oil from a local seed (groundnut oil) and Characterization†was carried out using ten cups of groundnut seeds that was purchased from a local market in Enugu metropolis. The oil these seeds were in Enugu using solvent extraction method. Two different solvents were used in the extraction namely:... Continue Reading
This project “The Production of Ceiling Board from Local Raw Materials†was carried out basically using raw materials which was sourced locally. These raw materials are found to be very much in abundance. Some are materials sourced from the ground and others are from agricultural wastes. Three different types of ceiling boards... Continue Reading
The production of high quality foam was carried. The actualization of the production of polyurethane (fibre) foam was made possible by using the components / chemical raw materials such as polyol (polyurethes resin). TDI (toluene di-Iso-cyanate, methylane chloride (MC)-(CH2CL). Silicon oil, stannous octoate, calcum carbonate and water. As... Continue Reading
The Turbine Mixer was Fabricated at the ________________________ The method of the fabrication of the Turbine Mixer involves a preliminary computation of the dimensions of the standard Turbine in relation to the dimension of the reacting vessel in which they will be used in. making out, cutting out to sizes, rolling/folding, welding, body... Continue Reading
The production and analysis of “Ngu†extract for temperature and water requirement for leaching of casuistic alkali is the basic objective of this project. The production was carried out by using unit operations and also using the female inflorescence of a palm fruit (Eleasis Guineesis) as raw material. The female... Continue Reading
ABSTRACT This study was aimed at the preservation of palm wine using ultraviolet radiation. The experiments were done using an ultraviolet sterilizer at time intervals of 2, 4,7,25 and 29hours. The freshly tapped palm wine was first analyzed and result shows that the pH, sugar content, specific... Continue Reading
ABSTRACT In the current study, coconut husk, a lignocellulosic biomass, was employed as the feedstock for production of bioethanol. The powderised coconut husks were subjected to thermal pretreatment, chemical pretreatment and microwave-assisted-alkaline (MAA) pretreatment... Continue Reading
ABSTRACT Soaps are the sodium salts or potassium salts of stearic acids or any other fatty acids. They are prepared by the saponification process, which is, reacting the oil which contain triglycerides with caustic soda (NaOH) to give the soap. However different oils... Continue Reading
ABSTRACT The table constructed has a horizontal top with vertical support or legs to raise it from the ground. The aim of the table constructed is for the preservation and storage of useful materials like books, files, computers, result booklets, electronics, office equipments and some vital home... Continue Reading
AN EMISSION INVENTORY OF POLLUTANTS IN ENUGU URBAN ABSTRACT Pollutant emissions in Enugu urban are generally from the combustion of petroleum products and to a negligible extent, solid waste disposal by open burning. The quantity of petroleum products consumed within Enugu urban was obtained in the spot” from the functional fuel stations in the... Continue Reading
Frequently Asked Questions on Chemical Engineering Project Topics
What are chemical engineering project topics?
Chemical Engineering project topics are research-based study areas that focus on key concepts, theories, and practical applications within the field of chemical engineering. These topics are used by ND, HND, B.Sc., and postgraduate students to complete final year projects in Nigerian institutions.
Where can I get chemical engineering project topics in Nigeria?
Students can access updated chemical engineering project topics and complete research materials in Nigeria through GrossArchive. The platform provides department-based project topics suitable for universities, polytechnics, and colleges of education.
Are these chemical engineering project topics suitable for ND and HND students?
Yes. The chemical engineering project topics available on GrossArchive are suitable for ND, HND, B.Sc., and postgraduate students and can be adjusted to meet specific academic requirements.
Can I download chemical engineering project materials in PDF?
Yes. Chemical Engineering project materials on GrossArchive are available for download in both PDF and Word formats, including complete chapters one to five.