Recent Chemical Engineering Project Topics and Materials (Page 8)

Showing 176 - 200 of 503

176) CRUDE OIL COMPONENTS

The Crude Oil Quality Group (COQG) is sponsoring this document as an informational tool to be used by personnel in the petroleum industry. This document is intended to provide basic information on the effects that certain crude oil contaminants have on refinery operations. COQG’s goal is for this document to provide beneficial material to all... Continue Reading

177) CRUDE OIL COMPONENTS

The Crude Oil Quality Group (COQG) is sponsoring this document as an informational tool to be used by personnel in the petroleum industry. This document is intended to provide basic information on the effects that certain crude oil contaminants have on refinery operations. COQG’s goal is for this document to provide beneficial material to all... Continue Reading

178) REPAIR AND REFURBISHING OF PILOT PLANT TEMPERATURE CONTROL APPARATUS

ABSTRACT The objective of the repair and refurbishing the pilot plant temperature control equipment is to keep the apparatus in good working condition for it to be used for its various purposes. The part of the temperature control changed and new one installed. This was due to series of faults developed by the former one” Electrical accessories... Continue Reading

179) FORMULATION AND PRODUCTION OF ALCOHOL FROM PALM WINE.

ABSTRACT This research work was arrived as the formulation and production of ethanol (ethyl alcohol) from the fermentation of palm wine. A fresh palm wine was ated which was obtained  from Emene in Enugu State.  The characteristics that was tested before and after fermentation were; specific gravity, refractive index and PH value of the... Continue Reading

180) CONSTRUCTION OF WATER STORAGE TANK (2000 LITRES)

ABSTRACT The 20000 liters storage tank was constructed for effective storage and conservation of third with three (3) mild steel sheet of 14 gauge (2mm) thickness. The construction started by marketing out 1½ (One and half) mild steel of 2440 Mm by 113Mmusing metal meter rule and critter the already market out dimension underwent cutting with a... Continue Reading

181) CONSTRUCTION OF WATER STORAGE TANK (2000 LITRES)

ABSTRACT The 20000 liters storage tank was constructed for effective storage and conservation of third with three (3) mild steel sheet of 14 gauge (2mm) thickness. The construction started by marketing out 1½ (One and half) mild steel of 2440 Mm by 113Mmusing metal meter rule and critter the already market out dimension underwent cutting with a... Continue Reading

182) CONSTRUCTION OF A HYDROCYCLONE

ABSTRACT The hydrocyclone is a separating device used for the separation of dust particles from air, which has no moving component parts. This mechanism can also be defined as a system of winds circulating about a center of relatively low barometric pressure and on the earths surface, blowing inward in spiral form. This project is constructed for... Continue Reading

183) PRODUCTION OF DOMESTIC POWDER

ABSTRACT This research project is aimed at producing domestic powder and consequently, three different types of powder were produced, namely, simple face powder (pan-cake), medicated/Antiseptic powder (dristing powder). During the various production Talcum, Zinc-oxide, Perfume, Menthol, Tragasan 300 DP (Triclosan), Mineral oil and colour (brown)... Continue Reading

184) THE BLEACHING OF PALM OIL USING ACTIVATED CHARCOAL

ABSTRACT This project work is on the bleaching of palm oil using activated charcoal. The charcoal used for this work was made from pieces of animal bone by carbonization method.  It was then activated into two different samples.  Firstly, the basic sample was activated using anaphoric acid (H2 s04) while the other was activated by just heating... Continue Reading

185) THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION & PRODUCTION OF EMULSION PAINT

ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint: water, titanium iv oxide, calcium carbonate, kaoline, calgon, natrosol, biocide P.V.A,... Continue Reading

186) DESIGN AND IMPLEMENTATION OF A COMPUTERIZED OUT-PATIENT INFORMATION SYSTEM FOR A CLINIC (A CASE STUDY OF HANSA CLINIC ENUGU)

ABSTRACT This research work shows us the potential benefits we may obtain from the computerization of the out-patient information system of the Hansa Clinic Enugu. The out-patient department otherwise called OPD is a place where the out-patient that is patients that receive treatment at the clinic without staying overnight, wait for the doctors to... Continue Reading

187) COMPARATIVE ANALYSIS OF COAL AND COCONUT ACTIVATED CARBON

ABSTRCT The experiment was carried out to analyze comparatively coal and coconut activated carbon. The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first activated using phosphoric acid. The activated coal and coconut carbons mere then used to bleach palm oil after... Continue Reading

188) CONTRUCTION OF A READING TABLE AND A CHAIR

ABSTRACT The table constructed has a horizontal top with vertical support or legs to raise it from the ground. The aim of the table constructed is for the preservation and storage of useful materials like books, files, computers, result booklets, electronics, office equipments and some vital home equipment etc. However, before the construction of... Continue Reading

189) DESIGN AND OPERATION OFA SHELL AND TUBE HEAT EXCHANGER

INTRODUCTION The most common type of heat exchanger used in industry contains a number of parallel tubes enclosed in a shell and is thus called a shell and tube heat exchanger. These heat exchangers are employed when a process required large quantities of fluid to be heated or cooled. Due to their compact design, these heat exchangers contain a... Continue Reading

190) A PROJECT REPORT ON THE REFURISHMENT OF FLUID FLOW DEMONSTRATION UNIT

ABSTRACT The refurbishment of the fluid flow demonstration unit was carried out in the Chemical Engineering pilot plant laboratory of the Institute of Management and Technology Enugu. The refurbishment process was carried out to ensure adequate functioning of the unit, to allow the continuous use of equipment in the pilot plant, so that student... Continue Reading

191) KINETIC STUDY AND OPTIMIZATION OF SELECTED FACTORS AFFECTING CORROSION USING RSM

ABSTRACT   The kinetics and optimization of inhibitive action of leaves extract of pawpaw, Azadirachta indica (neem tree) and bitter leaf on corrosion of mild steel in acidic medium was studied by weight loss technique using central composite design of response surface methodology for optimization. The metal was analyzed using Atomic Absorption... Continue Reading
  • Type:Project
  • ID:CNG0316
  • Pages:167

192) THE PRINCIPLE OF PARTICLE SETTLING IN MOTIONLESS FLUID

ABSTRACT Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading

193) THE PRINCIPLE OF PARTICLE SETTLING IN MOTIONLESS FLUID

ABSTRACT Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading

194) DESIGN AND FABRICATION OF SEDIMENTATION TEST RIG

ABSTRACT Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading

195) PLANT DESIGN OF 250,000KG/YR OF LINDANE

EXECUTIVE SUMMARY This work presents the design of a plant that will produce 250000kg/yr of lindane from benzene, chlorine and water at high temperature and pressure using direct chlorination method. The feeds are sent into a chlorinator, the crude product from the chlorinator is continuously decanted into a decanter and the bottom product HCl is... Continue Reading
  • Type:Project
  • ID:CNG0312
  • Pages:164

196) PLANT DESIGN OF 250,000KG/YR OF LINDANE

EXECUTIVE SUMMARY This work presents the design of a plant that will produce 250000kg/yr of lindane from benzene, chlorine and water at high temperature and pressure using direct chlorination method. The feeds are sent into a chlorinator, the crude product from the chlorinator is continuously decanted into a decanter and the bottom product HCl is... Continue Reading
  • Type:Project
  • ID:CNG0311
  • Pages:164

197) CHARACTERIZATION OF NON-EDIBLE OIL FROM WASTE PLANT MATERIALS FOR BIOIDIESEL PRODUCTION

Oil obtained from orange peels and velvet tamarind nut by solvent extraction (n-hexane and acetone) using the soxhlet extractor were investigated as feedstock’s to determine some of the suitable parameters such as iodine value, saponification value, specific gravity, density, acid value and free fatty acid value, and their percentage yield that... Continue Reading

198) REMEDIATION OF SOIL CONTAMINATED WITH DIESEL USING AN ANIONIC SURFACTANT (LAS) AS AN AGENT. (2)

Environmental pollution as a result of drilling and mining activities in areas where deposits of petroleum and oil are found, proved a great threat to the wellness of the fauna and flora as well as to the humans.  TABLE OF CONTENTS  Background of study literature review Oil pollution act of 1990 Diesel Chemical composition  Volatility of Diesel... Continue Reading

199) REMEDIATION OF SOIL CONTAMINATED WITH DIESEL USING AN ANIONIC SURFACTANT (LAS) AS AN AGENT. (2)

Environmental pollution as a result of drilling and mining activities in areas where deposits of petroleum and oil are found, proved a great threat to the wellness of the fauna and flora as well as to the humans.  TABLE OF CONTENTS  Background of study literature review Oil pollution act of 1990 Diesel Chemical composition  Volatility of Diesel... Continue Reading

200) PRODUCTION OF BIOETHANOL FROM CASSAVA USING A HYBRID OF SACCHAROMYCES CEREVISIAE AND SACCHAROMYCES PARADOXUS

ABSTRACT Cassava is considered as a potential source for the commercial production of bioethanol because of its availability and low market price. It can be used as a basic source to support large-scale biological production of bioethanol using microbial amylases. With the progression and advancement in enzymology, starch liquefying and... Continue Reading
Need help with your Chemical Engineering Project Topic? Click here to request assistnce or reach us on + 234 813 0686 6500
whatsappWhatsApp Us