Most Relevant Chemical Engineering Project Topics and Materials (Page 8)

Abstract Conventionally, air injection has been used for recovery of heavy crude oil in the production field, but studies have shown that depletion of light crude oil in the reservoir leads to abandonment of such wells. Hence, this work studied the kinetics and combustion of light crude oil in-situ... Continue Reading

ABSTRACT This study was carried out to generate a design data, design and fabricate a maize corn-on-cob tray dryer used by maize farmers. Ripped maize corns with husks were bought from the market and preserved to retained its moisture content, dehusked and thereafter, dried to a given percentage moisture content of 15%. This was done by laboratory... Continue Reading

ABSTRACT The aim of this project was to restore and renovate one phase, one horse power centrifugal pump to its normal operating condition for future practical purposes. The work started with fault finding/trouble shooting, a method of closing the discharge stop valve, and first priming the pump before running it was adopted. However, after... Continue Reading

ABSTRACT The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the chosen mild steel are;... Continue Reading

ABSTRACT Industrial wastewater treatment covers the mechanisms and process used to treat water that have been contaminated in some way by anthropogenic industrial or commercial activities prior to its release into the environment or its re-use.         Water is a natural and inorganic solvent with the composition of hydrogen and oxygen only... Continue Reading

ABSTRACT Generally, plastic is defined as long-chain organic material which can be formed into desired shape by the application of heat and pressure, also it extends to include so many organic metallic complex and also certain long-chain inorganic material based principally on silicon, phosphorus, nitrogen, aluminum or boron or mixtures of these.... Continue Reading

ABSTRACT This project “The Production of Ceiling Board from Local Raw Materials” was carried out basically using raw materials which was sourced locally. These raw materials are found to be very much in abundance. Some are materials sourced from the ground and others are from agricultural wastes. Three different types of ceiling boards were... Continue Reading

ABSTRACT The research project studies the analysis of pear and its oil. The mesocarp from edible African pear “DacryodesEdulis” were evaluated for their oil yield. The pulp from this pear were oven dried at 100oC-105oC to a moisture content level of 29%.The mesocarp was subjected to proximate analysis to determine the percentage of the... Continue Reading

ABSTRACT Generally, plastic is defined as long-chain organic material which can be formed into desired shape by the application of heat and pressure, also it extends to include so many organic metallic complexes and also certain long-chain inorganic material based principally on silicon, phosphorus, nitrogen, aluminum or boron or mixtures of... Continue Reading

Azeotropic distillation of ethanol-water mixture is accomplished by adding a volatile third component to the liquid which changes the volatility of one of the two components more than the other so the components are separated by distillation. The two components to be separated often have similar boiling point components which do or do not... Continue Reading

ABSTRACT Activated carbon, also widely known as activated charcoal or activated coal is a form of carbon which has been processed to make it extremely porous and thus to have a very large surface area available for adsorption or chemical reactions (Mattson et al., 1971). The word active is sometimes used in place of activated. It is characterized... Continue Reading

ABSTRACT Perfume extraction refers to the extraction of aromatic compounds from raw materials, using methods such as distillation, solvent extraction, expression or enfleurage. The extracts are either essential oils, absolutes, concretes, or butters, depending on the amount of waxes in the extracted product. Heat, chemical solvents, or exposure to... Continue Reading

ABSTRACT: The interest in using Jatropha curcas L. (JCL) as a feedstock for the production of bio-diesel is rapidly growing. The properties of the crop and its oil have persuaded investors and policy makers to consider JCL as a substitute for fossil fuels to reduce greenhouse gas emissions. In this report, we gave an overview of the currently... Continue Reading

ABSTRACT This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials. The local raw material were subjected to various processing conditions in order to obtain purified perfume. The methods generally used in this work include expression steam distillation and solvent extraction.... Continue Reading

ABSTRACT The advent of sachet and bottled water has increasingly filled the gap in household water security. This research work was carried out to assess the quality of bottled and sachet water sold in Bauchi metropolis. Thirty (30) water brands consisting of twenty (20) sachet water brands and ten (10) bottled water brands were assessed for their... Continue Reading

ABSTRACT: The interest in using Jatropha curcas L. (JCL) as a feedstock for the production of bio-diesel is rapidly growing. The properties of the crop and its oil have persuaded investors and policy makers to consider JCL as a substitute for fossil fuels to reduce greenhouse gas emissions. In this report, we gave an overview of the currently... Continue Reading

Note:This work contains only the schematic diagram/design of a biogas plant Biogas typically refers to a mixture of gases produced by the breakdown of organic matter in the absence of oxygen. Biogas can be produced from regionally available raw materials such as recycled waste. It is a renewable energy source and in many cases exerts a very small... Continue Reading

ABSTRACT The general approach to any design of a process plant involve an advanced network of chemical engineering process. Absorber is a process plant or equipment that are used in the purification of gas or separation of unwanted gas from the mixture when it comes in contact with the liquid. In this models mass transfer reaction and equilibrium... Continue Reading

ABSTRACT This project was carried out to ascertain whether the local palm oil met the required standard. The analytical test carried out include the free fatty acid test the acid value, iodine value moisture, content, saponfication value, peroxide value, specific gravity, colour and viscosity. The specific gravity of the oil sample was determined... Continue Reading

ABSTRACT The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow... Continue Reading

Cultivation of microalgae on municipal waste water Extraction of the oil from the algae cells. Production of biodiesel from the algae oil. Characterization of the biodiesel produced. Chapter 1 Introduction 1.1 Background 1.2 Statement of Problem 1.3 Aims and Objectives of Study 1.4 Significance of Study 1.5 Scope of Study Chapter 2 Literature... Continue Reading

ABSTRACT Cassava is considered as a potential source for the commercial production of bioethanol because of its availability and low market price. It can be used as a basic source to support large-scale biological production of bioethanol using microbial amylases. With the progression and advancement in enzymology, starch liquefying and... Continue Reading

ABSTRCT The experiment was carried out to analyze comparatively coal and coconut activated carbon. The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first activated using phosphoric acid. The activated coal and coconut carbons mere then used to bleach palm oil after... Continue Reading

ABSTRACT This research work shows us the potential benefits we may obtain from the computerization of the out-patient information system of the Hansa Clinic Enugu. The out-patient department otherwise called OPD is a place where the out-patient that is patients that receive treatment at the clinic without staying overnight, wait for the doctors to... Continue Reading

ABSTRACT This research project is aimed at producing domestic powder and consequently, three different types of powder were produced, namely, simple face powder (pan-cake), medicated/Antiseptic powder (dristing powder). During the various production Talcum, Zinc-oxide, Perfume, Menthol, Tragasan 300 DP (Triclosan), Mineral oil and colour (brown)... Continue Reading