ABSTRACT This study was aimed at developing a rational approach to septic tank design in order to reduce health risks associated with improperly treated effluent especially in developing countries. To this end, several research tools including questionnaires, pilot scale study and model formulation were employed. Questionnaires were used to... Continue Reading
ABSTRACT In the sense that the materials involved in this project were capital intensive more especially cement, so in carrying out the work one must have to be careful in the selection and collection of materials to be used in the casting of the concrete. The materials used are coarse aggregate (granite) fine aggregate (sand). The coarse... Continue Reading
ABSTRACT This research work on the water drainage problems (A case study of IMT campus 3 Enugu), the scope of this research work covers every activity which has to do with the drainage problems, background to the subject matter, rational for the study and the limitations of the study, the research review as, the related literature about the... Continue Reading
PREFACE This is presentation of information on the detailing of structural members in Buildings. Structural detailing is a branch of structural work that transposes the ideal or works of a Structural Engineer in working drawings for easy utilization in the building construction works. Working drawing are produced by an... Continue Reading
TABLE CONTENTS CHAPTER ONE Introduction Retaining walls Cantilever rw Rankin theory Forces on cantilever rw Counterfort rw Forces on counterfort rw The gravity rw Forces on gravity rw CHAPTER TWO Stability of retaining wall Soil properties of rws Drainage in rw Allowable bearing capacity CHAPTER THREE Procedure for the design of rw Analysis... Continue Reading
ABSTRACT The project covers a view and detailed explanation of the route survey which in chider reconnaissance surrey, theologize traversing and levelling operation as well as soil tests which includes compaction test, mechanical analysis, plastic and liquid limits and CBR test. The project also covers... Continue Reading
PREFACE In structural detailing, the project is initiated by the structural engineer. The architectural drawings are prepared by the architect to the required scale and specification given to him by the client. The structural engineer designs the structural frame work of the building and specification required such as slab, beam, column and... Continue Reading
ABSTRACT Sugarcane as an agricultural product is a readily available source of food for its sugar content. However, Sugarcane Bagasse Ash (SCBA) is the bi- product formed at sugar industries from the burning of sugarcane after the sugar content has been extracted. Sugarcane Bagasse Ash (SCBA) is a fibrous waste product containing mainly aluminum... Continue Reading
ABSTRACT One of the major problems facing the country is pavement failure. It is the concern of the Institute of Management and Technology (IMT) authorities to carryout a case study of pavement failure along Hillview off ESBS Road Enugu. The investigation show that the pavement failed both structural and functionally taking into consideration. The... Continue Reading
PREFACE In structural detailing, the project is initiated by the structural engineer. The architectural drawings are prepared by the architect to the required scale and specification given to him by the client. The structural engineer designs the structural frame work of the building and specification required such as slab, beam, column and... Continue Reading
PREFACE This is the presentation of an information on the structural reinforcement detailing of concrete members. Structural detailing is a branch of structural work that transposes the idea or works of a structural engineer into working drawing or easy utilization in the building construction works. Working drawing are produced an engineer for... Continue Reading
ABSTRACT The work has gone a long way in determining strength of concrete made of various aggregates such as granites stone, black gravel, washed gravel and surface gravel. Some factors such as porosity of the aggregate temperature causing loss of water plate form for mixing of concrete mix affect the workability and eventually the strength of... Continue Reading
ABSTRACT This project involves the route survey which includes: reconnaissance survey, theodolite traversing and leveling operations as well as soil tests which includes; plastic limit test, liquid limit tests and moisture content determination, compaction tests and California bearing ratio tests. This project also involves the design of the... Continue Reading
ABSTRACT This research work on the water drainage problems (A case study of IMT campus 3 Enugu), the scope of this research work covers every activity which has to do with the drainage problems, background to the subject matter, rational for the study and the limitations of the study, the research review as, the related literature about the... Continue Reading
PREFACE This case study is an existing pathway or fort path linking Ugwuji and Campus 111 (IMT) for a proposed road construction by the government of Enugu State. This project encloses the following -The condition of the existing sub-grade and its suitability for use as a good sub-grade soil material by processes of different lab test. -Using... Continue Reading
ABSTRACT This case study is “comparing the strength of blocks made from: cement stabilized laterite blocks, cement stabilized red earth blocks and sand, red earth and laterite blocks and mud blocks dried in the kiln. This project implement the following analysis (1)To effect reduction to the rise in market price of sand (fine aggregate),... Continue Reading
ABSTRACT This thesis on a project undertaken by the author is aimed at providing explanation of the basic theory of the work of road design and its associated activities also, to cover practical methods of working. In pursuit of the meaningful completion this project a lot of investigation was embarked with principles and practice of road... Continue Reading
This project work aims at formulating Scheffe’s mathematical model which prescribes concrete mix ratios for a desired compressive strength of periwinkle shell aggregate concrete and obtaining the combination of water, cement, river sand and periwinkle shell which will produce the optimum strength. The model was formulated from first principle... Continue Reading
ABSTRACT This project “maintenance of urban infrastructures (a case study of Ilorin metropolis)” lays emphasis on the various Infrastructures such as Roads, Rail, Electricity, Water-Supply, Solid Waste Management Facilities, Drainage Facilities and Sewerage. The various magnitude and the facilities provided were looked upon; the various... Continue Reading
ABSTRACT During this research work, namely; the undrained shear behavior of soils within Nnamdi Azikiwe University, five different samples within the university compound were analyzed. Some laboratory test was carried out for classification and identification of their engineering properties, these tests include particle size distribution,... Continue Reading
Nigeria has plenty of Agricultural waste products such as coconut fibre, rice husk, corn cob and oil palm frond fibre. If the waste cannot be disposed properly it, will lead to social and environmental problem. The selection of coconut fibre in this study is a good effort in order to reduce a bulk of coconut fibre waste in Nigeria, according to a... Continue Reading
ABSTRACT This work is an attempt at recycling and re-use of waste paper within Mapoly Community. Since the day it is invented till today, paper is a part of human life in various ways and it is gaining even more popularity as years go by. As the consumption of paper has been exploited. Recycling of paper has become vital since the demand for paper... Continue Reading
The project work assessed the volumetric shrinkage and hydraulic conductivity of lateritic soil-bamboo leaf ash admixture as liner materials for use in waste containment systems or structures such that the result shows effectiveness for use.... Continue Reading
INTRODUCTION This work was obligated to present in one. The fundamental and practical information in the filed of the comparative analysis of the strength of concrete made from various aggregate which may be useful to people involve in civil and structural engineering and particularly, those that found pleasure in the design and related structure.... Continue Reading