DESIGN OF ROAD PAVEMENT LINKING FEDERAL SECRETARIAT INDUSTRIAL CENTRE AND MASS COMMUNICATION DEPARTMENT (IMT CAMPUS III) ENUGU

  • Type: Project
  • Department: Civil Engineering
  • Project ID: CVE0085
  • Access Fee: ₦5,000 ($14)
  • Pages: 90 Pages
  • Format: Microsoft Word
  • Views: 756
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT

This thesis on a project undertaken by the author is aimed at providing explanation of the basic theory of the  work of road design and its associated activities also, to cover practical methods of working.
In pursuit of the meaningful completion this project a lot of investigation was embarked with principles and practice of road construction. The total distance of route was determined and stations established bearing in mind the intervisibility of the stations.
Leveling was carried out to obtain information on the profile of the route for proper earthwork knowledge which theodolite traversing was carried out to obtain the plan and horizontal alignment of the route
Soil analysis, gave the proper constitute of the soil which was also carried out  to and in the pavement design. Therefore the pavement design of the route was abased on the results obtained from the soil analysis using the CBR method.

TABLE CONTENTS
Approval page
Dedication
Abstract
Acknowledgement
Table of content

CHAPTER ONE
INTRODUCTION
1.1  Relevance of project
1.2  Site inspection
1.3  Evolution of road network in nigeria
1.4  Motor vehicle characteristic that affects road design data
1.5  Drivers and their characteristics
1.6  Reconnaissance survey
1.6.1Chain survey
1.6.2Station marking
1.7  Factors Affecting Choice Of Station

CHAPTER TWO
THEODOLITE TRANSVERSING OF THE ROAD CONTROL
2.1  Definitions
2.2  Thetheodolite
2.3  Theodorite adjustment
2.3.1Temporary adjustment
2.3.2Permanent adjustment
2.4  Procedure for theodolite traversing
2.5Materials used for the theodolte traversinging

CHAPTER THREE
PROJECT FIELD LEVELING WORK 
3.1  Leveling
3.2  Profile leveling
3.3  Cross leveling
3.4  Objectives of leveling
3.5  Instruments used in leveling
3.6  Temporary adjustment of leveling instrument
3.7  Definition of some leveling terminologies
3.8  Leveling book
3.9  Earthwork computation
3.9.1Method

CHAPTER FOUR
SOIL ANALYSIS
4.1  Collection and preliminary preparation of samples
4.2  Mechanical analysis
4.3  Atterberg/consistency limit tests
4.3.1Liquid limit test
4.3.2Plastic limit test
4.4  Compaction test
4.5  The California bearing ratio (cbr) test
4.6  Pavement design using cbr

CHAPTER FIVE
GEOMETRIC ELEMENTS DESIGN 
5.1  Basic design parameters
5.1.1Design speed
5.1.2Gradient
5.1.3Sight distance
5.2  Curve design
5.3  Curve parameters and formula used, in designing of horizontal curves
5.4  Vertical curve design
5.5  Cross sectional elements of the road
5.6  Brief description on stages of work and equipment used n road constriction
5.7  Summary and conclusion
     Bibliography

DESIGN OF ROAD PAVEMENT LINKING FEDERAL SECRETARIAT INDUSTRIAL CENTRE AND MASS COMMUNICATION DEPARTMENT (IMT CAMPUS III) ENUGU
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Civil Engineering
  • Project ID: CVE0085
  • Access Fee: ₦5,000 ($14)
  • Pages: 90 Pages
  • Format: Microsoft Word
  • Views: 756
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Civil Engineering
    Project ID CVE0085
    Fee ₦5,000 ($14)
    No of Pages 90 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT This thesis on a project undertaken by the author is aimed at providing explanation of the basic theory of the work of road design and its associated activities also, to cover practical methods of working. In pursuit of the meaningful completion this project a lot of investigation was embarked with principles and practice of road... Continue Reading
    ABSTRACT This thesis on a project undertaken by the author is aimed at providing explanation of the basic theory of the  work of road design and its associated activities also, to cover practical methods of working. In pursuit of the meaningful completion this project a lot of investigation was embarked with principles and practice of road... Continue Reading
    ROUTE SURVEY OF ROAD AND PAVEMENT DESIGN (REHABILITATION/MODERNIZATION) CASE STUDY: ROAD LINKING FEDERAL SECRETARIAT INDUSTRIAL CENTRE AND MASS COMMUNICATION DEPARTMENT (IMT CAMPUS III), ENUGU ABSTRACT The study cover a view and a detailed explanation of the modification required to be carried out on the main access road linkage of the Campus III... Continue Reading
    ABSTRACT This thesis on a project undertaken by the author is aimed at providing explanation of the basic theory  of the  work of road design and its associated activities also, to cover practical methods of working. In pursuit of the meaningful completion this project a lot of investigation was embarked with principles and practice of road... Continue Reading
      ABSTRACT This thesis on a project undertaken by the author is aimed at providing explanation of the basic theory of the work of road design and its associated activities also, to cover practical methods of working. In pursuit of the meaningful completion this project a lot of investigation was embarked with principles and practice of road... Continue Reading
    ABSTRACT  The project covers a view and detailed explanation of the route survey which in chider reconnaissance surrey, theologize traversing and levelling operation as well as soil tests which includes compaction test, mechanical analysis, plastic and liquid limits and CBR test. The project also covers the design of pavement   and the geometric... Continue Reading
    ABSTRACT  The study cover a view ad detailed explanation of the modification required to be carried out on the main access road lining federal secretariat and IMT civil soil laboratory and industrial centre order to update it’s services functions. The need for easing the flow of traffic on this access road has risen, since it’s a busy area in... Continue Reading
    ABSTRACT The study cover a view ad detailed explanation of the modification required to be carried out on the main access road lining federal secretariat and IMT civil soil laboratory and industrial centre order to update it’s services functions. The need for easing the flow of traffic on this access road has risen, since it’s a busy area in... Continue Reading
    ABSTRACT The project covers a view and detailed explanation of the route survey which in chider reconnaissance surrey, theologize traversing and levelling operation as well as soil tests which includes... Continue Reading
    BASIC SOIL TEST ON SUB-GRADE SOIL MATERIAL & FLEXIBLE PAVEMENT DESIGN ON ROAD LINKING – UGWUAJI AND CAMPUS M, IMT; ENUGU, ENUGU STATE PREFACE This case study is an existing pathway or fort path linking Ugwuji and Campus 111 (IMT) for a proposed road construction by the government of Enugu State. This project encloses the following - The... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us