Most Read Petroleum Engineering Project Topics and Materials (Page 2)

ABSTRACT This research work mainly investigates the development and the behavior of cones (both water and gas cones) in oil reservoirs supported by strong aquifer, and from which analytical correlations are developed for quick engineering estimates of the time for water/gas cones to break into the perforations of the producing wells. The studies... Continue Reading

ABSTRACT The production of formation sand is a problem associated with most oil deposits in the world. Major Sand production effects affect safety, well or field economics and continuous production. This has prompted the continued search for solutions to mitigate sand production in the oil and gas industry over time. The methodology often employed... Continue Reading

Natural gas is one of the major sources of fuel and raw material to industries all over the world. However, it contains some acid gases such as C O2 and H2 S which are corrosive and harmful to the environment. These acid gases must be brought to permissible limits to promote safety in the operation and increase the heating value of the natural... Continue Reading

ABSTRACT Techniques in Geostatistics are increasingly being used to generate reservoir models and quantify uncertainty in reservoir properties. This is achieved through the construction of multiple realizations to capture the physically significant features in the reservoir. However, only a limited number of these realizations are required for... Continue Reading

ABSTRACT Maximum production from an oil well can be achieved through proper selection of tubing size. The selection of optimum tubing size must be evaluated when completing a well in any type of reservoir especially solution gas drive reservoir since there is likelihood of producing more gas as the reservoir pressure declines. The most widely used... Continue Reading

ABSTRACT  This project work deals on the feasibility of transferring the Toe – To  – Heel Air Injection (THAI) technology which is a new in-situ  combustion method of heavy oil recovery from Alberta, Canada,  where the technology has recorded success with high rate of recovery  to South-West, Nigeria (Ondo state) for efficient heavy oil... Continue Reading

ABSTRACT This research work was carried out to evaluate the different methods of corrosion prevention, control and monitoring. In the course of the research many scholarly articles on the subject matter were reviewed from which the researcher got lot information concerning the topic at hand. Thus making the research work a reliable source of... Continue Reading

ABSTRACT Reservoir development planning and well placement significantly affect hydrocarbon recovery. Therefore, strategic well placement and development techniques are essential to minimize the risk of unproductive drilling and also to maximize production within the reservoir. This study presents an approach to well placement and production in a... Continue Reading

According to Bittner (2015) he argued that in a bid to ensure good community relations, organizations expend shareholders money, cut down workers salaries, waste precious time which should be used for other profitable things. He calls it “a fundamentally subversive doctrine which offers insoluble practical problems”. While Nweke (2001:220) is... Continue Reading

This study investigated the concentration of heavy metals in oil field produced water from Niger Delta, before and after treatment with locally sourced agricultural wastes. Two produced water samples were investigated for different metal ions such as; Lead, Nickel, Cadmium, Copper, Iron, Magnesium, Chromium, Zinc, Manganese, Calcium, Arsenic,... Continue Reading

ABSTRACT The maximum recoverable oil in place from the reservoir is a major challenge when it comes to EOR which is an essential part of every oil production project. In some cases, the natural drive mechanism is a relatively inefficient process and results in a low overall oil recovery. The lack of sufficient natural drive in such reservoirs has... Continue Reading

This is a review of The HP HT wells in Niger Delta.... Continue Reading

According to Bittner (2015) he argued that in a bid to ensure good community relations, organizations expend shareholders money, cut down workers salaries, waste precious time which should be used for other profitable things. He calls it “a fundamentally subversive doctrine which offers insoluble practical problems”. While Nweke (2001:220) is... Continue Reading

Carbon steel corrosion is a commonly encountered issue in pipelines transporting hydrocarbons containing corrosive agents such as CO2, H2S and water. As a result, several corrosion prediction models have been put forward over the years although no standard model exists for corrosion prediction in the industry. Two of such models are the Norsok... Continue Reading

The aim of the project is to develop a numerical tool used to predict vessel motions of a turret moored FPSO, then perform a comparative analysis between the 6 degree of motions measured on the FPSOs during the 7 months period and the predictions from this numerical model. The first step was to carry out statistical and extreme value analysis of... Continue Reading

ABSTRACT This research work was carried out to evaluate the different methods of corrosion prevention, control and monitoring. In the course of the research many scholarly articles on the subject matter were reviewed from which the researcher got lot information concerning the topic at hand. Thus making the research work a reliable source of... Continue Reading

This study investigated the concentration of heavy metals in oil field produced water from Niger Delta, before and after treatment with locally sourced agricultural wastes. Two produced water samples were investigated for different metal ions such as; Lead, Nickel, Cadmium, Copper, Iron, Magnesium, Chromium, Zinc, Manganese, Calcium, Arsenic,... Continue Reading

Abstract The Niger Delta is on the throes of death caused by the unmitigated exploration, exploitation and production of hydrocarbon which feeds and develops foreign economies at the detriment of the host communities which live in the worst state of neglect by... Continue Reading

ABSTRACT This research work was carried out to evaluate the laboratory analysis of pipeline products marketing company (PPMC) depot operations.  In the course of the research many scholarly articles on the subject matter were reviewed from which the researcher got lot information concerning the topic at hand. Thus making the research work a... Continue Reading

Natural gas is one of the major sources of fuel and raw material to industries all over the world. However, it contains some acid gases such as C O2 and H2 S which are corrosive and harmful to the environment. These acid gases must be brought to permissible limits to promote safety in the operation and increase the heating value of the natural... Continue Reading

ABSTRACT This research involves the application of pyrolysis has been viewed as an efficient means for the proper disposal of waste plastics in the environment amongst others. In this research, the influence of two catalysts namely; Zeolite and Titanium (IV) oxide are examined. Zeolite as a catalyst has obtained approval due to its ability to... Continue Reading

TABLE OF CONTENT  TITLE PAGE DEDICATION ACKNOWLEDGEMENT ABSTRACT TABLE OF CONTENT CHAPTER 1  INTRODUCTION   1.1 BACKGROUND  1.2 NATURAL GAS AND THE NIGERIAN ECONOMY  1.3 OBJECTIVE  1.4 PROBLEM STATEMENT   CHAPTER II LITERATURE REVIEW     2.1 GAS UTILISATION IN NIGERIA   2.2 LIQUEFIED NATURAL GAS  2.3 FISCHER TROPSCH GAS TO LIQUID... Continue Reading

ABSTRACT The effect of liquid flow rate, pipe size (diameter) and pipe orientation (inclination) on liquid hold-up was investigated. Liquid flow rate between 500 STB/day and 5000 STB/day was studied. An oil of 25˚API at an average temperature of 175˚F, a gas gravity of 0.65, water cut of 25% with water gravity of 1.07 and containing no free gas... Continue Reading

Abstract Biodiesel is a renewable fuel that will soon be fully accepted in the commercial world but there are limitations to its use that need improvement. The use of oxygenated additives have improved the burning/fuel qualities of conventional diesel and gasoline. These oxygenates may also improve the qualities of biodiesel. This paper focuses on... Continue Reading