DEVELOPMENT OF A PROPELLER DRIVEN TRICYCLE FOR INTRA-CAMPUS USE

  • Type: Project
  • Department: Construction Management
  • Project ID: CMG0016
  • Access Fee: ₦5,000 ($14)
  • Pages: 49 Pages
  • Format: Microsoft Word
  • Views: 201
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

This project proposes the use of a propellers to power a lightweight vehicle as a non-conventional means of transportation within the school environment.

Propellers work based on the generation of thrust sufficient enough to move a mass (in this case, a lightweight, three-wheeled vehicle) to which it is connected. The propeller powered vehicle makes use of this thrust generated as the basic source of power needed for acceleration.

Although there already exist various works on the development and use of three-wheeled vehicles by various means, the use of propellers give the added advantage of better fuel efficiency achieved via weight reduction by the elimination of complex transmission mechanisms and replacing them with a much simpler belt drive system.

The project aim was to design a propeller-driven tricycle of dimensions 1200x1000x800 able to carry up to 75kg and capable of achieving speeds up to 60km/hr. A delta wheelbase configuration was used for the design considering its merits and belt drive was the preferred choice of motion transmission from the engine to the propeller.

A working model was developed weighing about 42kg (empty weight) was developed with the capability of carrying 52kg human weight at a speed of 23.04km/hr. In conclusion, it was shown that the tricycle had a relatively good loading capacity, good speed and stability and will serve as an efficient alternative means of transport for short and medium-range transportation especially within the school campus.

 

 

                                    TABLE OF CONTENTS

TITLE PAGE……………………………………………………………………i

CERTIFICATION………………………………………………………………ii

DEDICATION…………………………………………………………………..iii

ACKNWLEDGEMENT………………………………………………………...iv

ABSTRACT……………………………………………………………………...v

TABLE OF CONTENTS………………………………………………………..vi

LIST OF FIGURES……………………………………………………………...viii

LIST OF TABLES……………………………………………………………….ix

CHAPTER ONE

1.0  Introduction

1.1  Overview and background……………………………………………………….1

1.2  Statement of the Problem………………………………………………………...2

1.3  Aim and Objectives……………………………………………………………....3

1.4  Methodology…………………………………………………………….………..4

1.5  Justification……………………………………………….………………………4

1.6  Scope and Limitation……………………………………….………………….....4

CHAPTER TWO

2.0 Literature review

2.1 History and development of three-wheeled vehicles (tricycles)……………….…7

2.2 Theory and mechanism behind propeller propulsion………………………….….11

            2.2.1 Propulsion……………………………………………………………….11

            2.2.2 Thrust……………………………………………………………………13

            2.2.3 Propulsion using propellers………………………………………..........13

2.3 Engine selection…………………………………………………………………...16

2.4 Belt drives………………………………………………………………………....17

2.5 Design considerations: tadpole vs delta trike……………………………………...20

2.6 Material selection ………………………………………………………………....20

 

 

CHAPTER THREE

3.1 Principle of operation…………………………………………………….………..22

3.2 Design consideration………………………………………………………………22

3.2.1 Design concept and prototype development…………………………….23

3.3 Design calculations………………………………………………………………..27

            3.3.1 Design loads……………………………………………...………………..27

            3.3.2 Engine power required…………………………………………….………27

            3.3.3 Engine specifications………………………………………………….…...28

            3.3.4 Transmission from engine to the propeller……………..…………………28

            3.3.5 Thrust produced by the propeller………………………………………….29

            3.3.6 Power developed by the propeller…………………………………………30

            3.3.7 Power delivered to the wheels……………………………………………..30

3.4 Material Selection……………………………………………………………………31

            3.4.1 Propeller Selection…………………………………………………………31

CHAPTER FOUR

4.1 Results………………………………………………………………………………..32

4.2 Comparison between the propeller-powered tricycle and conventional motorized

      Tricycles……………………………………………………………………...………33

4.3 Cost analysis………………………………………………………………………….34

CHAPTER FIVE

5.1 Conclusion……………………………………………………………………………35

5.2 Recommendations……………………………………………………………………36

REFERENCES………………………………………………………………………….37

APPENDIX………………………………………………………………………………38

DEVELOPMENT OF A PROPELLER DRIVEN TRICYCLE FOR INTRA-CAMPUS USE
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Construction Management
  • Project ID: CMG0016
  • Access Fee: ₦5,000 ($14)
  • Pages: 49 Pages
  • Format: Microsoft Word
  • Views: 201
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Construction Management
    Project ID CMG0016
    Fee ₦5,000 ($14)
    No of Pages 49 Pages
    Format Microsoft Word

    Related Works

    This project proposes the use of a propellers to power a lightweight vehicle as a non-conventional means of transportation within the school environment. Propellers work based on the generation of thrust sufficient enough to move a mass (in this case, a lightweight, three-wheeled vehicle) to which it is connected. The propeller powered vehicle... Continue Reading
    This project proposes the use of a propellers to power a lightweight vehicle as a non-conventional means of transportation within the school environment. Propellers work based on the generation of thrust sufficient enough to move a mass (in this case, a lightweight, three-wheeled vehicle) to which it is connected. The propeller powered vehicle... Continue Reading
    ABSTRACT The single wheel driven boom sprayer was developed, fabricated and evaluated for its performance at the department of Agricultural and Bio-environmental engineering workshop, Kwara state polytechnic, Ilorin. The spraying performance was carried out at spraying height of 0.5m, 0.6m and 0.7m respectively. The theoretical  field capacity... Continue Reading
    CHAPTER ONE GENERAL INTRODUCTION Introduction This chapter presents the introduction to the study. It presents that theoretical background, statement of the problem, aim and objectives of the study, significance of the study, scope of the study, organization of the research and definition of terms. The use of computer (information technology) in... Continue Reading
    TABLE OF CONTENTS DECLARATION .i APPROVAL ii DEDICATION iii ACKNOWLEDGEMENT iv LIST OF ABRIVIATIONS/ ACRONYMS v TABLE OF CONTENTS vi OPERATIONAL DEFINITIONS x ABSTRACT xi CHARTER ONE 1 INTRODUCTION 1 1.0 Introduction 1 1.1 Background 1 1.2 Vision 2 1.3 Mission 2 1.4 Overall goal 3 1.5 Problem Statement 3 1.6 Objectives of the study 3 1.6.1 General... Continue Reading
    ABSTRACT This project goes into detailed evaluation of tricycle as public means of transport system in an urban area with a particular reference to Ipata-Sango, Ilorin metropolis selected as the case study. The project reviews existing literature on Tricycle ( Keke Napep) within Ipata-Sango, Ilorin. Inclusive are the circumstances that led to the... Continue Reading
    ABSTRACT The construction of propeller agitator used for agitating and mixing of low viscous fluid was fabricated in the mechanical workshop of the institute of management and technology Enugu. In the construction, galvanized mild steel was chosen due to its inherent properties.  After procurement, the following constructional operations were... Continue Reading
    ABSTRACT Propeller agitator is a specialized of various types of substances. It consists of three basic components which are the shaft, blade and the vessel. In the construction, mild steel was chosen due to it’s inherent properties. After the procurement, the following constructional operations were carried out which included marking out,... Continue Reading
    ABSTRACT Propeller agitator is a specialized of various types of substances.  It consists of three basic components which are the shaft, blade and the vessel. In the construction, mild steel was chosen due to it’s inherent properties.  After the procurement, the following constructional operations were carried out which included marking... Continue Reading
    ABSTRACT The construction of propeller agitator used for agitating and mixing of low viscous fluid was fabricated in the mechanical workshop of the institute of management and technology Enugu. In the construction, galvanized mild steel was chosen due to its inherent properties. After procurement, the following... Continue Reading
    Call Us
    whatsappWhatsApp Us