Recent Civil Engineering Project Topics and Materials (Page 9)

PREFACE The whole information conveyed in this book has been planned and written for proper understanding of structural detailing of a building. The approach in this book is to provide the readers sound and basic knowledge in structural detailing in a building. Consequently, I have given more details than is normally given in a book concerning... Continue Reading

PREFACE This project is mainly concerned with the presentation of information basically on the structural detailing of reinforced concrete members of a story building, in a sloppy land with a retaining wall.  Structural detailing is a branch of structural work that transposes the idea of works of a structural engineer into working drawings for... Continue Reading

PREFACE In structural detailing, the project is initiated by the structural engineer. The architectural drawings are prepared by the architect to the required scale and specification given to him by the client. The structural engineer designs the structural frame work of the building and specification required such as slab, beam, column and... Continue Reading

ABSTRACT One of the major problems facing the country is pavement failure. It is the concern of the Institute of Management and Technology (IMT) authorities to carryout a case study of pavement failure along Hillview off ESBS Road Enugu. The investigation show that the pavement failed both structural and functionally taking into consideration. The... Continue Reading

ABSTRACT Groundwater hydrology may be defined as the science of the occurrence distribution, and movement of water below the surface of the earth. Geochydrology has an identical connotation, and hydrogeology differs only by its greater emphasis on geology. Utilization of groundwater dates from ancient times, although an understanding of the... Continue Reading

ABSTRACT In the sense that the materials involved in this project were capital intensive more especially cement, so in carrying out the work one must intensive to be careful in the selection and collection of materials to be used in the casting of the concrete. The materials used are coarse aggregate (granite) fine aggregate (sand). The coarse... Continue Reading

ABSTRACT Sugarcane as an agricultural product is a readily available source of food for its sugar content. However, Sugarcane Bagasse Ash (SCBA) is the bi- product formed at sugar industries from the burning of sugarcane after the sugar content has been extracted. Sugarcane Bagasse Ash (SCBA) is a fibrous waste product containing mainly aluminum... Continue Reading

ABSTRACT Food is inevitable in ones life and fish is a main source of vitamins and protein in ones life. Fish pond is a place for growing fish for commercial or private needs or gestetic purpose. The design of fish pond is very important because of its aqueous retaining nature which if there is leakage will not only cause loss of water but also... Continue Reading

ABSTRACT One of the major problems facing the country is pavement failure. It is the concern of the Institute of Management and Technology (IMT) authorities to carryout a case study of pavement failure along Hillview off ESBS Road Enugu. The investigation show that the pavement failed both structural and functionally taking into consideration. The... Continue Reading

PREFACE In structural detailing, the project is initiated by the structural engineer. The architectural drawings are prepared by the architect to the required scale and specification given to him by the client. The structural engineer designs the structural frame work of the building and specification required such as slab, beam, column and... Continue Reading

ABSTRACT             The project covers a view and detailed explanation of the route survey which in chider reconnaissance surrey, theologize traversing and levelling operation as well as soil tests which includes compaction test, mechanical analysis, plastic and liquid limits and CBR test.             The project also covers... Continue Reading

TABLE CONTENTS CHAPTER ONE Introduction Retaining walls Cantilever rw Rankin theory Forces on cantilever rw Counterfort  rw Forces on counterfort rw The gravity rw Forces on gravity rw CHAPTER TWO Stability of retaining wall Soil properties of rws Drainage in rw Allowable bearing capacity CHAPTER THREE Procedure for the design of rw Analysis... Continue Reading

ABSTRACT The ignorant of the effect of sewage effluent on the permeability and other engineering properties of soil has to a level, reduced the pace of development in terms of technology.     The wide use of soil, irrespective of the type in virtually all civil engineering projects across the globe today has given rise to numerous researches on... Continue Reading

ABSTRACT             This case study is “comparing the strength of blocks made from: cement stabilized laterite blocks, cement stabilized red earth blocks and sand,  red earth and laterite blocks and mud blocks dried in the kiln.             This project implement the following analysis... Continue Reading

PREFACE             This is presentation of information on the detailing of structural members in Buildings. Structural detailing is a branch of structural work that transposes the ideal or works of a Structural Engineer in working drawings for easy utilization in the building construction works. Working drawing are produced by an... Continue Reading

ABSTRACT This research work on the water drainage problems (A case study of IMT campus 3 Enugu), the scope of this research work covers every activity which has to do with the drainage problems, background to the subject matter, rational for the study and the limitations of the study, the research review as, the related literature about the... Continue Reading

PREFACE             This project is mainly concerned with the presentation of information basically on the structural detailing of reinforced concrete members of a story building, in a sloppy land with a retaining wall.  Structural detailing is a branch of structural work that transposes the idea of works of a structural engineer into... Continue Reading

ABSTRACT The current extensive use of low quality aggregate in Nigerian road for engineering applications is of concern because their appear to be a level of ignorance surrounding their existing properties and implications. This project was conceived for the purpose of comparing the crushed aggregate deposits in Isi-Agu Abia State and mac-Daniels... Continue Reading

ABSTRACT This project, aimed at investigating the anaerobic processes in septic tank as a waste water treatment option using waste water from septic tank and Soakaway as sample A and B respectively. It was observed that after the  analysis, sample A (septic tank which has fresh waste water) has higher value in conductivity =1708us/ cm3, Total... Continue Reading

ABSTRACT In the sense that the materials involved in this project were capital intensive more especially cement, so in carrying out the work one must have to be careful in the selection and collection of materials to be used in the casting of the concrete. The materials used are coarse aggregate (granite) fine aggregate (sand). The coarse... Continue Reading

ABSTRACT This study was aimed at developing a rational approach to septic tank design in order to reduce health risks associated with improperly treated effluent especially in developing countries. To this end, several research tools including questionnaires, pilot scale study and model formulation were employed. Questionnaires were used to... Continue Reading

ABSTRACT A significant revolution with computers’ usage in civil engineering business and construction process has been presented. Computers reduce all the extensive work specifically through the introduction of programs and software. Lately, software development has effectively contributed in various civil engineering disciplines, as it... Continue Reading

ABSTRACT The technical report of this project deals with the design of a water treatment plant model which consists of five tanks. Water treatment plant model is made up of glass with pipe joining them together to allow movement of water from one tank to another. 6mm plain glass is used for base and 5mm plain glass is used for other component.... Continue Reading

ABSTRACT The Reliability Analysis of a Prestressed Concrete Beam (PCB) was presented using First Order Reliability Method and Eurocode 2 procedures to carry out the analysis. The results show that the safety of the PCBin bending decreasedfrom 2.9 to 1.0 and 3.1 to 2.6 as prestress force and the depth from the extreme compressive fiber to the... Continue Reading

ABSTRACT The quest for economy in asphalt production using locally available materials necessitated this research which is aimed at evaluating the suitability of Saw Dust Ash (SDA) as mineral filler in asphalt mixture.Chemical analysis, sieve analysis, specific gravity and plasticity index tests were performed on SDA. Asphalt briquettes prepared... Continue Reading