+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

Plant Design of High Fructose Corn Syrup

  • Type:Project
  • Pages:86
  • Format:Microsoft Word
(Chemical Engineering Project Topics & Materials)
This project envisages the establishment of a plant for the production of high fructose corn syrup with a capacity of 6,000 tons per annum.



The country`s requirement of corn syrup is met through import. The present (2013) demand for syrup is estimated at 5,000 tons. The demand for the product is projected to reach 8,858 tones and 14,266 tons by the year 2018 and year 2023, respectively.



The principal raw materials required are starch, alpha-amylase, gluco-amaylase, and glucose isomerase. Starch is locally obtained from corn while the other raw materials have to be imported. Corn is leading source of starch both for food and for its use in industries and composed of approximately: 72% Starch, 6%Gluten, 10%Fiber and 12%Germ. Plant Design of High Fructose Corn Syrup

Share This

Details

Type Project
Department Chemical Engineering
Project ID CNG0272
Price ₦3,000 ($9)
No of Pages 86 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Chemical Engineering
    Project ID CNG0272
    Price ₦3,000 ($9)
    No of Pages 86 Pages
    Format Microsoft Word

    Related Works

    CHAPTER ONE INTRODUCTION The project is a pre-requisite for the award of Higher National Diploma (HND) in Mechanical Engineering. The project “Design and fabrication a corn shelling machine” is indeed an essential one in a time like this when almost al human endeavour is embracing technology for efficiency and realiability. First a corn... Continue Reading
    ABSTRACT             A machine for corn shelling is highly and greatly needed to consistency of usage of corn in local and international levels.             With regards to this indispensable needs, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact.... Continue Reading
    CHAPTER ONE INTRODUCTION The project is a pre-requisite for the award of Higher National Diploma (HND) in Mechanical Engineering. The project “Design and fabrication a corn shelling machine” is indeed an essential one in a time like this when almost al human endeavour is embracing technology for... Continue Reading
    ABSTRACT A machine for corn shelling is highly and greatly needed to consistency of usage of corn in local and international levels. With regards to this indispensable needs, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to... Continue Reading
    ABSTRACT This study was carried out to generate a design data, design and fabricate a maize corn-on-cob tray dryer used by maize farmers. Ripped maize corns with husks were bought from the market and preserved to retained its moisture content, dehusked and thereafter, dried to a given percentage moisture content of 15%. This was done by laboratory... Continue Reading
    The word Nematode is derived from the Greek word, what is the word?. Meaning “thread like ones” (nema means “thread” and ode means “like”). Nematodes can therefore be described as thread-like worms. (dropking 2001). Nematodes, eelworms and round worms are synonymous for the same group of organisms. The Phylum Nemata, to which nematodes... Continue Reading
    Note:This work contains only the schematic diagram/design of a biogas plant Biogas typically refers to a mixture of gases produced by the breakdown of organic matter in the absence of oxygen. Biogas can be produced from regionally available raw materials such as recycled waste. It is a renewable energy source and in many cases exerts a very small... Continue Reading
    EXECUTIVE SUMMARY This work presents the design of a plant that will produce 250000kg/yr of lindane from benzene, chlorine and water at high temperature and pressure using direct chlorination method. The feeds are sent into a chlorinator, the crude product from the chlorinator is continuously decanted into a decanter and the bottom product HCl is... Continue Reading
    EXECUTIVE SUMMARY This work presents the design of a plant that will produce 250000kg/yr of lindane from benzene, chlorine and water at high temperature and pressure using direct chlorination method. The feeds are sent into a chlorinator, the crude product from the chlorinator is continuously decanted into a decanter and the bottom product HCl is... Continue Reading
    ABSTRACT           The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint.           The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is... Continue Reading