Chemical Engineering Project Topics and Materials (Page 12)

Showing 276 - 300 of 503

276) FORMULATION AND PRODUCTION OF LEVERA SOAP

ABSTRACT The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow... Continue Reading

277) THE EFFECT OF LIQUID FLOERATE AND GAS FLOWRATE ON A PACKED ABSORPTION TOWER AND REPAIR OF EQUIPMENT

ABSTRACT The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to repair and restore the packed absorption tower to good working condition. Trouble shooting revealed that the exit drain value was broken due to carelessness on the part of former user of the... Continue Reading

278) CHARACTERISTICS OF LOCAL PRODUCED OIL FROM GROUNDNUT OIL

ABSTRACT This project “Characteristics Of Local Produced Oil From Groundnut Oil” was carried out using ten cups of groundnut seeds that was purchased from a local market in Enugu metropolis. The oil these seeds were in Enugu using solvent extraction method. Two different solvents were used in the extraction namely: Ethane and order to compare... Continue Reading

279) UTLILIZATION STUDIES OF ENUGU COAL

ABSTRACT This study has its theme as a utilization studies of Enugu coals with the view of studying its properties, classification, preparation storage etc comparing coals obtained from different locations. The Enugu coal is a sub-bitummous and non coking coal. It is very rich in waxes and resins, thus it may be suitable for the production of... Continue Reading

280) DESIGN AND CONSTRUCTION OF A REFRIGERATING UNIT

ABSTRACT The design and construction of s refrigerating unit is handled from the knowledge of the working principles of laws of thermodynamics. The size of the containing vessel i.e the case as established to be of 45cm by 32 cm in dimension. The Angle iron mild steel to used in the fabrication and welding. The box case of two layers are... Continue Reading

281) CONSTRUCTION OF TABLE TOP LIQUIDLIQUID EXTRACTION UNIT

ABSTRACT A table top liquid-liquid extraction unit was constructed. The project also involved the repair and servicing of peristaltic suction pump, by painting it, replacing the connecting cord to the power supply, refilling of the work out suction plates, teeth and general servicing of the equipment. The glass absorption columns were provided as... Continue Reading

282) DESIGN AND IMPLEMENTATION OF A WINDOW BASED FRONT-DESK INFORMATION SYSTEM (A CASE STUDY OF MAY FRESH SAVINGS AND LOAN LIMITED ONITSHA

ABSTRACT In account form analysis, a lot of discrepancies causes by manual aspect of the form such as: lost of form, inability to correct intakes, poor storage facilities have been a problem in the May fresh savings and loan limited account form. But in recent times, the computer has come to the aid of our banks, May fresh in particular. The... Continue Reading

283) PLANT DESIGN OF HIGH FRUCTOSE CORN SYRUP

This project envisages the establishment of a plant for the production of high fructose corn syrup with a capacity of 6,000 tons per annum. The country`s requirement of corn syrup is met through import. The present (2013) demand for syrup is estimated at 5,000 tons. The demand for the product is projected to reach 8,858 tones and 14,266 tons by... Continue Reading

284) BIODIESEL PRODUCE FROM JATROPHA SEED

Team Oil from [the] Soil is comprised of a group of senior chemical engineers at Calvin College who are proposing an alternative method to producing biodiesel. This alternative entails converting the oil found in seeds from the Jatropha Curcas plant into biodiesel.  Team Oil from [the] Soil plans to design and optimize a full scale plant that... Continue Reading

285) THE FABRICATION FOR A SET OF SIEVES AND SAKER

ABSRACT The fabrication of a set of sieves and shaker was carried out in paliton workshop, Enugu. After a thorough analysis on the suitable materials to be used in fabrication, galvanized steel was chosen due to its advantages over materials of fabrication. The fabrication was carried out in order to analyze the sizes of particles. The component... Continue Reading

286) CONSTRUCTION OF PACKED DISTILLATION COLUMN

ABSTRACT This is an abstract on the construction of a packed distillation column. A packed distillation column is used in the separating process distillation that is the separation of two miscible liquids. It was constructed by marking out the dimension of the column, condenser, pot, using steel rule scriber, oxyacetylene flame was used for... Continue Reading

287) THE CONSTRUCTION OF SIEVE EQUIPMENT

ABSTRACT The sets of seizes with shocker which was fabricated and assembled in the chemical engineering pilot plant was aimed at providing the students with a machine that will aid them in practical involving the separation of solid particles. Besides this, it was also fabricated sizes or diameter of the solid particles of a substance by allowing... Continue Reading

288) REFINING OF VEGETABLE OIL WITH ENUGU COAL

ABSTRACT This project was carried out using acid activated coal from Enugu coal and the production of ve4getablew oil was monitored using spectrophotometer to measure the absorbance. It was also perform to check the suitability of activated Enugu coal as a bleaching agent for palm oil. The Enugu coal samples were collected, size reduced,... Continue Reading

289) FORMULATION OF ARTIST PAINT

ABSTRACT   This study was carried out principally for the formulation of artist paint using available raw materials. Paint simplified is a material which may be applied to surfaces in relatively thin layers and which changes to a solid and may occur by evaporation of solvents, by chemical reaction or by combination of the two. Artist paint is the... Continue Reading

290) PRODUCTION OF CASSAVA OF STARCH FROM CASSAVA

ABSTRACT The fresh cassava were sources from Idodo in Nkanu Local Government of Enugu state. The weight of the cassava tuber were taken to be 31.50kg. After peeling and washing, it was divided into two equal parts which was 21.13kg for production of sample A and sample B respectively (edible and textile starch) which weighed 13.1kg. During this... Continue Reading

291) PRODUCTION OF BIODIESEL FROM JATROPHA CROP

ABSTRACT: The interest in using Jatropha curcas L. (JCL) as a feedstock for the production of bio-diesel is rapidly growing. The properties of the crop and its oil have persuaded investors and policy makers to consider JCL as a substitute for fossil fuels to reduce greenhouse gas emissions. In this report, we gave an overview of the currently... Continue Reading

292) BIOSTIMULATION OF CRUDE OIL CONTAMINATED SOIL USING LOCAL AND FOREIGN STIMULANTS

ABSTRACT Bioremediation is an important technology for the restoration of oil polluted environments by indigenous or selected microorganisms. In general, the rate of biodegradation depends on the number and types of micro-organism, the nature and chemical structure of pollutants to be degraded and the environmental conditions. In this study, the... Continue Reading

293) HEALTH EFFECTS OF AIR POLLUTION IN OLEH TOWN, DELTA STATE

The spread of pollutant in an area is partly a function of wood burning in local kitchens by the population of the area. This pollution generated through combustion of wood  fuels presents difficult environmental challenges to societies as it could degrade the environment and affect human health and quality of life. Wood burning emissions are... Continue Reading

294) PHYSIO-CHEMICAL AND MICRO BACTERIAL ASSESSMENT OF BOTTLED WATER SAMPLES SOLD IN BAUCHI METROPOLIS

ABSTRACT The advent of sachet and bottled water has increasingly filled the gap in household water security. This research work was carried out to assess the quality of bottled and sachet water sold in Bauchi metropolis. Thirty (30) water brands consisting of twenty (20) sachet water brands and ten (10) bottled water brands were assessed for their... Continue Reading

295) POWER GENERATION BY USING COAL FIRED CIRCULATING FLUDIZED BOILER

This project contains details of Coal fired circulating fluidize boiler.The motivation of our project was to develop a method which is energy economical i.e. uses less energy owing to increasing energy issues. Process description, mass balance, energy balance, equipment design, and cost estimation of circulating fluidized bed boiler for combustion... Continue Reading
  • Type:Project
  • ID:CNG0271
  • Pages:103

296) ALTERNATIVE RAW MATERIAL SOURES FOR CEMENT PRODUCTION

ABSTRACT It is generally known that cement id produced from limestone, mar/clay and gypsum by the following three basic process- wet semi- wet aid dry process. The cost of exploiting the limestone: the major raw material constitute about 50% of the production cost which results in the high cost of cement. It therefore becomes imperative to bring... Continue Reading

297) PRODUCTION OF LOQUID AND VAPOURIZED PERFUME

ABSTRACT This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials. The local raw material were subjected to various processing conditions in order to obtain purified perfume. The methods generally used in this work include expression steam distillation and solvent extraction.... Continue Reading

298) PRODUCTION OF EMULSION POINT WITH THE AVAILABLE MATERIAL

ABSTRACT This project is on the production of paint from the available materials. The first process involved was the sourcing of the available material which include calcium carbonate (dotonute) water etc. the next step is the proper production procedure. The same product patterns was employed while the production was valued with a view to obtain... Continue Reading

299) PRODUCTION OF A HIGH QUALITY BAR SOAP AND COMPARE WITH DETERGENT.

ABSTRACT. The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps. In soap production, cold process was used and this was found out to be the most effective means of production... Continue Reading
  • Type:Project
  • ID:CNG0263
  • Pages:100

300) PRODUCTION OF METHANOL FROM BIOMASS

                                                                 ABSTRACT          Biomass is organic materials that are made from plants and animals. Biomass stored alot of energy from the sun. Biomass is renewable sources of energy which can grow more such as trees and crops,... Continue Reading
Need help with your Chemical Engineering Project Topic? Click here to request assistnce or reach us on + 234 813 0686 6500
whatsappWhatsApp Us