Most Relevant Mechanical Engineering Project Topics and Materials (Page 5)

ABSTRACT This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of employments for our teaming population.... Continue Reading

ABSTRACT             This project is concerned write the identification of those defects that are found in most of the drawing tables in the Mechanical Engineering drawing studio.             The report investigates the possible ways through which the mentioned above can be brought back to normal standard for usage ins the... Continue Reading

ABSTRACT This project is concern about the construction of an electrical stove with three oven apartment is described in his project. It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternative means to replace the use of keroseneand gas for cooking and drying which are often... Continue Reading

ABSTRACT The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint. The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is driven by an electrically made device, a... Continue Reading

ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints impressed on sheets of varied thickness. The... Continue Reading

ABSTRACT This Nylon sealing and cutting machine has an added advantage of making 800 sealed bags per hour. The constructional machines were sourced locally. The machine can cut and seal Nylon at a affordable cost. The constructional size of 31 cm x 7.5cm x 12.4 which comprises the following component. The sealing and cutting filament, the... Continue Reading

ABSTRACT The air of this project is to design and fabricate a bench shearing machine which can complete favorably with the imported ones. this machine is designed and fabricate, using our cheap and available materials. Some qualities such as durability, reliability and portability are guaranteed. It is functional and can cut or shear a metal of up... Continue Reading

PREFACE The electrical popcorn machine is a device for preparing especial popcorn for the human consumption. The device in produced to help the masses to be self valiance in this are of down trodden economy. This project work is divided into five chapters, chapter one; the introduction discusses the relevance of the project work, problems it is... Continue Reading

INTRODUCTION REFRIGERATION Refrigeration is a branch of science that deals with the process of removing heat from a substance or space in order to make it cooler. Refrigerator is defined as a device that is used in cooling the internal temperature below the room temperature (that is between 250C to 300C). Generally, however, for a space or... Continue Reading

ABSTRACT Conveying goods from one place to another via trucks has been a long-held practice because of its usefulness. There are different types of trucks that are available in this regard such as ; two axle, three axle, four axle trucks etc and each with its unique functionality. Businesses relying on the movement of bulky raw materials and... Continue Reading

INTRODUCTION REFRIGERATION Refrigeration is a branch of science that deals with the process of removing heat from a substance or space in order to make it cooler. Refrigerator is defined as a device that is used in cooling the internal temperature below the room temperature (that is between 250C to 300C). Generally, however, for a space or... Continue Reading

INTRODUCTION Communication means extending information form one person to another in a way in which it can be understood. Information and ideas in technical and scientific fields can very often be more easily communicated through sketching or instrument drawing and blueprint reading. Drawing involves describing the shape and size of an object.... Continue Reading

ABSTRACT When comparing with other manufacturing technologies, the extrusion technology always stands out as it is known to be highly efficient in terms of producing products of superior quality with the least possible amount of wastage. With the ever-increasing cost of materials, energy and the competition in the market, it becomes almost... Continue Reading

ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading

Focuses on the maximum volume of waste generated in a particular month in a particular area and uses a heuristic model for it's analysis. Research Problem A proper, efficient, reliable and hygienic waste handling and disposal technique tells more of our maintenance culture but the capacity and ability to efficiently manage the waste becomes... Continue Reading

The major components of a gas turbine are compressor, combustors, turbine and generator. It operates by continuous drawing in fresh air into the compressor. The Air is then compressed to a high pressure in the compressor and discharge into the combustion. Here the air is missed with gas and burns continuous once ignited to increase its energy... Continue Reading

A lawnmower is a machine that uses a revolving blade or blades to cut a lawn grass. Many designs have been made, each suited to a particular purpose. Manual grass cutter has environmental issues regarding pollution's and also require the need of man power to operate and has a great maintenance to its engine. This robot is design to be environment... Continue Reading

ABSTRACT This study assess lubricant Oil Discharge on Soil Properties in mechanic village. It spans through the effects on soil properties, effects on water bodies, effects on human and other living organisms, effects on the environment, general hazards caused by this activity... Continue Reading

Due to the need for recycling Polyethylene terephthalate (PET or PETE) materials, especially bottles because of its various uses and applications, it was necessary that a locally made machine for crushing and shredding the PET materials was fabricated. The crushing process is necessary so as to aid the transportation and workability of the... Continue Reading

ABSTRACT Composites have been developed with great success by the use of reinforcement. Monolithic materials cannot possess all the properties to be obtained hence, the need to employ the use of composite materials. Aluminum is generally utilized as a basic material particularly in the aerospace industry in view of its light weight property Be... Continue Reading

Company background and overview Anbessa City Bus Service Enterprise is the largest City Public Transportation Company in  Ethiopia established immediately after the Italian invasion in 1943 by collecting old vehicles  and garage equipment from the invader. At the time its name was Public Transport and guided  by Italians and other foreigners.... Continue Reading

ABSTRACT This Machine is design and fabricate as a prerequisite for the award of a Higher National Diploma. We sketch different designs which after consideration of many factors like the machine efficiency, the cost of materials e.t.c before we finally embark on this machine. The machine major component are the shaft, the inner barrel, the outer... Continue Reading

ABSTRACT The intruder alarm system was designed and build in order to let the industrial and commercial company know how important alarm system is all about. These can be of Good help if the intruder will look through this project and support for the development of this project as to let the Federal Government know that the young engineering of... Continue Reading

ABSTRACT Mechanical Engineering Department of the Institute of Management and Technology has many non – functional machines. This is caused as a result of poor maintenance culture, which in turn resulted to breakdown of the Deep Freezer under review.... Continue Reading

PRAFACE Based the fact, for humans quest to belted and secure things he uses and have them arranged in place without being transfer, like the files tea books, important to man for future wage and academic excel. To this end, in which this written articles need to be presented, we embarked on the... Continue Reading