SYNTHESIS AND PROPERTIES OF COPPER NICKEL SELENIDE (CUNISE) THIN FILM BY CHEMICAL BATH DEPOSITION METHOD.

  • Type: Project
  • Department: Physics
  • Project ID: PHY0058
  • Access Fee: ₦5,000 ($14)
  • Pages: 55 Pages
  • Format: Microsoft Word
  • Views: 143
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853


Abstract:

Thin films of Copper Nickel Selenide (CuNiSe) were synthesized on glass slides at room temperature using chemical bath deposition (CBD) method. The films were deposited from aqueous solution containing copper ion, nickel ion and potassium selenate (K2SeO4) at varying molar concentration of nickel ion with constant time and pH of the reaction bath. The optical absorption data reveals that films of CuNiSe absorbs strongly at the ultraviolet range of 300 nm and has above 60% transmittance in the visible–near infrared regions. The results revealed high average band gap energy that ranges between 2.8 eV to 3.5 eV. Average particle size films obtained ranges from 6.46 nm to 15.66 nm. The film is found suitable for window layer in p-n junction solar cell.



TABLE OF CONTENTS

 

Title page --------------------------------------------------------------------------------- i

Declaration --------------------------------------------------------------------------------ii

Certification ----------------------------------------------------------------------------- iii

Dedication ------------------------------------------------------------------------------- iv

Acknowledgement ---------------------------------------------------------------------- v

Table of contents -------------------------------------------------------------------------vi

List of tables -------------------------------------------------------------------------------x

List of figures ----------------------------------------------------------------------------xi

Abstract --------------------------------------------------------------------------------- xiii

 

     CHAPTER ONE

1.1            Introduction -------------------------------------------------------------------------1

1.2            Background of study ---------------------------------------------------------------4

1.3            Statement of Problem---------------------------------------------------------------4

1.4            Aim and objectives of the study -------------------------------------------------- 5

1.5            Purpose of the study -----------------------------------------------------------------6

1.6            Scope of study ------------------------------------------------------------------------6

 

CHAPTER TWO

2.1 Literature Review -------------------------------------------------------------------7

2.2 Methods of Thin Film Deposition -----------------------------------------------12

2.3 Film Measurement Techniques ------------------------------------------------- 17

 

       CHAPTER THREE

3.1 Materials and Method -------------------------------------------------------------20

3.1.1 Material preparation ----------------------------------------------------------- 21

3.1.1.1 Copper (ii) chloride dihydrate -----------------------------------------------21

3.1.1.2 Nickel (ii) chloride hexahydrate --------------------------------------------22

3.1.1.3 Disodium ethylene diamine tetracetate ------------------------------------22

3.1.1.4 Potassium selenite ------------------------------------------------------------23

3.1.1.5 Ammonium solution -------------------------------------------------------- 23

3.2 Deposition of Copper Aluminum Selenide films -----------------------------23

3.3 Characterization of the fabricated thin film -----------------------------------25

 

        CHAPTER FOUR

4.1 Result and Discussion -----------------------------------------------------------26

4.1.2 Transmittance ------------------------------------------------------------------27

4.1.3 Reluctance ------------------------------------------------------------------- 28

4.1.4 Reluctance Index -------------------------------------------------------------29

4.1.5 Extinction Coefficient ------------------------------------------------------ 30

4.1.6 Real Dielectric Constant -----------------------------------------------------31

4.1.7 Imaginary Dielectric Constant ----------------------------------------------32

4.1.8 Optical Conductivity -------------------------------------------------------- 33

4.1.9 Optical Band Gap -------------------------------------------------------------34

4.1.10 Average Optical Thickness -------------------------------------------------35

CHAPTER FIVE 

 5.0       Discussion, Conclusion and Recommendations

REFERENCES

CHAPTER FIVE
5.0 Discussion, Conclusion and Recommendations
CHAPTER FIVE
5.0 Discussion, Conclusion and Recommendations
SYNTHESIS AND PROPERTIES OF COPPER NICKEL SELENIDE (CUNISE) THIN FILM BY CHEMICAL BATH DEPOSITION METHOD.
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Physics
  • Project ID: PHY0058
  • Access Fee: ₦5,000 ($14)
  • Pages: 55 Pages
  • Format: Microsoft Word
  • Views: 143
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Physics
    Project ID PHY0058
    Fee ₦5,000 ($14)
    No of Pages 55 Pages
    Format Microsoft Word

    Related Works

    Abstract: Thin films of Copper Nickel Selenide (CuNiSe) were synthesized on glass slides at room temperature using chemical bath deposition (CBD) method. The films were deposited from aqueous solution containing copper ion, nickel ion and potassium selenate (K 2 SeO 4 ) at varying molar concentration of nickel ion with constant time and pH of the... Continue Reading
    Abstract: Thin films of Copper Nickel Selenide (CuNiSe) were synthesized on glass slides at room temperature using chemical bath deposition (CBD) method. The films were deposited from aqueous solution containing copper ion, nickel ion and potassium selenate (K2SeO4) at varying molar concentration of nickel ion with constant time and pH of the... Continue Reading
    ABSTRACT Nickel amine carboxylate complexes were synthesized by reacting Ni(ii)chloride with ammonia, malonic and tartaric acid, which formed Nickel amine malonate and Nickel amine tartarate  of  blue and green crystal and  the percentage yield are of both complexes are 62.65% and 62.83% respectively. The decomposition temperatures were 218o C... Continue Reading
    ABSTRACT Nickel amine carboxylate complexes were synthesized by reacting Ni(ii)chloride with ammonia, malonic and tartaric acid, which formed Nickel amine malonate and Nickel amine tartarate  of  blue and green crystal and  the percentage yield are of both complexes are 62.65% and 62.83% respectively. The decomposition temperatures were 218o C... Continue Reading
    OPTICAL AND STRUCTURAL PROPERTIES OF COPPER ALUMINUM DISELENIDE (CuAlSe 2 ) COMPOUND THIN FILMS ABSTRACT A low cost chemical bath deposition technique has been used for the preparation of Copper aluminum diselenide (CuAlSe2) thin films onto commercial microscope glass substrates. The values of deposition parameters were varied such as... Continue Reading
    ABSTRACT Chelates of 2-bromovaleric acid hydrazide (BVH) and acetone2- bromovaleric acid hydrazone (ABVH) with MS04 (where M is Ni, Cu, Co, Mn, Zn, V02+) were synthesized in water-methanol medium. They were characterized by infrared and electronic spectral studies, solubility, elemental analysis, conductivity and antimicrobial screemng. Electronic... Continue Reading
    This manuscript contains an insight into the mechanisms of inorganic carbene chemistry; synthesis of imidazolium salts from its precursors to using computational chemistry to calculate their quantum mechanical properties. As well as an attempt to deprotonate the iPr imidazolium salt and coordinating the carbene to a standard but labile Ni(0)... Continue Reading
    ABSTRACT This study examined the effects of chemical pre-milling treatment on the physico-chemical as well as pasting properties of Mucuna sloanei ‘ukpo’ flour. The seeds were treated with Distilled water, Citric Acid, Sodium bicarbonate, and Sodium Chloride solutions at various levels of concentration (1% 2.50%, 5% 7.5%, 10% w/v) before... Continue Reading
    ABSTRACT The usefulness of non-steroidal anti-inflammatory agents in the management of rheumatoid diseases cannot be over-emphasized. As this disease is characterized by chronic inflammation, it is usual to test compounds for anti-inflammatory activity in animals and then hope that the active ones should be clinically useful as anti-rheumatic... Continue Reading
     ABSTRACT This work examined the physicochemical properties of cocoyam flour. Cocoyam corms were cleaned, peeled, diced, blanched, sundried, milled and sieved to obtain flour of fine particle sizes. Physical properties and chemical composition of the flour were determined in accordance with standard methods. The results of the physical properties... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us