CONSTRUCTION OF INDUSTRIAL WHEEL BARROW

  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0126
  • Access Fee: ₦5,000 ($14)
  • Pages: 48 Pages
  • Format: Microsoft Word
  • Views: 778
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT

Wheelbarrow is a simple machine, which belong to the second-class lever. This is because the load or resistance is placed between the effort and the fulcrum. It is used in many areas of work to convey loads that are too heavy or bulky to be carried by hand. Wheelbarrow can be used as farm equipment, industrial equipment among others.
However, the efficiency of the wheelbarrow depends on the materials used for the construction. A wrong choice of these materials can reduce the efficiency and the life span of the machine.
Although no machine can operated with 100 percent efficiency because the friction of its parts always use up some of the energy that is being supplied to the machine. But friction can be decreased by oiling any sliding or rotating parts.
Moreover, depending on the type/size of machine to be constructed, the materials are reduced to smaller and more convenient sizes. The shapes and forms are changed by the following constructional operations, marking out, cutting, drilling, filling, recurring, taping broaching, folding/bending, welding, surface coating etc.
Most of these operations may be carried out by use of manual or mechanized processes depending on the size of the workshop.
In conclusion, a fixed amount of load was placed on the wheelbarrow to determine the efficiency and the effort required to lift the load. And according to the result gotten, the machine is highly efficient and required a very small effort to move objects many times their own size.


TABLE OF CONTENT

Title page
Dedication
Acknowledgement
Letter of transmittal
Abstract
Table of contents

CHAPTER ONE
INTRODUCTION
1.1History/origin
1.2Machine
1.3Principles of machines
1.4Efficiency
1.5Mechanical advantage
1.6Simple machine
1.7Lever
CHAPTER TWO
LITERATURE REVIEW
2.1Science of material
2.2Properties of material
2.2Alloy designation

CHAPTER THREE
3.1Material selection
3.2Basic machine tool operation
3.3Metal removal
3.4Metal forming
3.5Construction method
3.6Autographic drawing

CHAPTER FOUR
4.1Calculation
4.2Cost evaluation 

CHAPTER FIVE
5.1Discussion
5.2Recommendations
5.3Conclusion
5.4Reference
Appendix

CONSTRUCTION OF INDUSTRIAL WHEEL BARROW
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0126
  • Access Fee: ₦5,000 ($14)
  • Pages: 48 Pages
  • Format: Microsoft Word
  • Views: 778
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Mechanical Engineering
    Project ID MCE0126
    Fee ₦5,000 ($14)
    No of Pages 48 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT After detailed study on machines and levers, the construction work started as follows:- Making out, pattern development, cutting filling, drilling, machining, assembling, welding and finishing. Detailed procedures carried out are located at the sequence of operation in subsequent pages. The machine... Continue Reading
    ABSTRACT After detailed study on machines and levers, the construction work started as follows:- Making out, pattern development, cutting filling, drilling, machining, assembling, welding and finishing. Detailed procedures carried out is located at the sequence of operation in subsequent pages. The machine has scale of 1:5 in all parts of its... Continue Reading
    CONSTRUCTION OF WHEEL BARROW ABSTRACT Wheel barrow is used for transporting loads of heavy or bulky by pushing it form one place to another. A 100kg wheel barrow was constructed using material like; Bucket - 2.5mm galvanized steel, 700mm span Carriage - 3mm mild steel Stand - 45mm wide x4mm width steel And other parts of like Braces, Rim, and... Continue Reading
    ABSTRACT After detailed study on machines and levers, the construction work started as follows:- Making out, pattern development, cutting filling, drilling, machining, assembling, welding and finishing.  Detailed procedures carried out is located at the sequence of operation in subsequent pages. The machine has scale of 1:5 in all parts of its... Continue Reading
    ABSTRACT When it comes to construction projects, landscaping work, and gardening, you need the right kind of equipment to finish tasks speedily and easily. One piece of equipment you would need is a motorised wheelbarrow. This is intended to carry bulky materials and heavy loads. There are a lot of equipments that can be used these days for... Continue Reading
    ABSTRACT When it comes to construction projects, landscaping work, and gardening, you need the right kind of equipment to finish tasks speedily and easily. One piece of equipment you would need is a motorised wheelbarrow. This is intended to carry bulky materials and heavy loads. There are a lot of equipments that can be used these days for... Continue Reading
    ABSTRACT When it comes to construction projects, landscaping work, and gardening, you need the right kind of equipment to finish tasks speedily and easily. One piece of equipment you would need is a motorised wheelbarrow. This is intended to carry bulky materials and heavy loads. There are a lot of equipments that can be used these days for... Continue Reading
    ABSTRACT When it comes to construction projects, landscaping work, and gardening, you need the right kind of equipment to finish tasks speedily and easily. One piece of equipment you would need is a motorised wheelbarrow. This is intended to carry bulky materials and heavy loads. There are a lot of equipments that can be used these days for... Continue Reading
    ABSTRACT When it comes to construction projects, landscaping work, and gardening, you need the right kind of equipment to finish tasks speedily and easily. One piece of equipment you would need is a motorised wheelbarrow. This is intended to carry bulky materials and heavy loads. There are a lot of equipments that can be used these days for... Continue Reading
    ABSTRACT When it comes to construction projects, landscaping work, and gardening, you need the right kind of equipment to finish tasks speedily and easily. One piece of equipment you would need is a motorised wheelbarrow. This is intended to carry bulky materials and heavy loads. There are a lot of equipments that can be used these days for... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us