Most Relevant Mechanical Engineering Project Topics and Materials (Page 13)

The focus of this project was the development of an ICU/Rehabilitation adjustable bed for the hospital and home environment. The project was initiated with the desire to develop an innovative, effective and inexpensive mechanism that would require an electrical supply. The design was performed systematically using various methods, procedures,... Continue Reading

The continuous search for sustainable alternative energy to non renewable energy to mitigate  environmental pollution has made waste heat recovery from industries process, material and  energy streams frontier. Power plant technologies like steam and Organic Rankine cycle are  been research by researchers to improve waste heat recovery... Continue Reading

This project seek to modify the existing cassava grating machine to make it to be self-feeding in operation, to make the operation of the machine easier, safer The existing processing techniques used in the production of cassava starch and cassava dough leaves much to be desired. There are difficulties in the grating of the cassava dough, since... Continue Reading

A lawnmower is a machine that uses a revolving blade or blades to cut a lawn grass. Many designs have been made, each suited to a particular purpose. Manual grass cutter has environmental issues regarding pollution's and also require the need of man power to operate and has a great maintenance to its engine. This robot is design to be environment... Continue Reading

ABSTRACT This project work deals with the design and fabrication of a suitable journal bearing test apparatus which can help in visualizing the behavior of journal bearing and its characteristics, and in determining the bearing parameters such as load bearing capacity, maximum oil film temperature, viscosity of lubricant, oil film pressure, and... Continue Reading

An energy audit on the Brass Liquified Natural Gas plant at Brass Island former Agip facility was carried. The average offshore windspeed and wave return periods for 12months  were measured for their wind and wave energy potentials. Also,  the solar insolation for the location was collected for a 12month period. A pilot design based on... Continue Reading

By definition, penetrant testing (PT) is the resurgence of a liquid (or a gas) from a discontinuity in which it had previously been introduced during a penetration operation. A logical extension of the visual examination, this method makes it possible to detect discontinuities opened to the surface of the controlled part in the form of colored or... Continue Reading

The fast growing and developing population of the world is so busy that instant food noodles are gaining ground for both humans and domestic animals. Incidentally, the machines involved in the production of these food noddle extruders are imported which results in the depletion of our foreign exchange reserve. Consequently, there is a growing need... Continue Reading

ABSTRACT This write up focuses attention on a detailed report and account on the process of construction and formulation of plan for the actual and physical realization of the construction of the project work captioned fabrication and construction of a mobile cooling system.  The report is therefore divided into chapters and each chapter... Continue Reading

ABSTRACT This write up is a detail of the process and formulation of plan for the physical realization of the construction of a refrigerator. It is divided into chapter, which discussed extensively the practical refrigeration cycle with full attention given to design factors, working principle and choice of material. The method used in... Continue Reading

ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It also comprises of materials as follows: Mechanical and Electrical section Mechanical section include the frame structure, lever and the pedal... Continue Reading

ABSTRACT Bookshelf, a Mechanical arrangement of materials were documents are stored, it could be made with metal or wood.  But this one is fabricated with metal. The type of metal used in the fabrication is mild steel and square baluters. The undismountable bookshelf which has five partitions and four compartment under went many process namely,... Continue Reading

ABSTRACT Man’s impact on global environment system especially in the area of dust extraction is now at a scale where it is disrupting.  These dust extractors varies in major ways. The environmental degradation is, in turn contributing to health threat in this part of the globe.  Unfortunately most factories, workshops which suppose to... Continue Reading

ABSTRACT This project is concern about the construction of an electrical stove with three oven apartment is described in his project.  It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternative means to replace the use of  kerosene and gas for cooking and drying which are... Continue Reading

ABSTRACT The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint. The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is driven by an electrically made device, a... Continue Reading

ABSTRACT This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of employments for our teaming population.... Continue Reading

ABSTRACT The need for an authentic and reliable report relating to the repairs and rehabilitation of a faulty air-conditioner is inevitable. Many homes and offices uses the air-conditioner to cool he temperature in their respective homes.  So the maintenance of the air-conditioner should be a top priority of every individual in order to avoid... Continue Reading

ABSTRACT This project is a fabrication of a standard drawing writing desk using the cheapest, effective and most readily available materials. Method of maintenance and services were also taken into consideration. The functional aspect of the equipment was also given adequate consideration in the project work. Also take into consideration the... Continue Reading

ABSTRACT         A book shelve is a structure which here series of compartments for the preservation of books, valuable or useful materials, which are made up of metal, wood or plastic materials of construction. (Engineering materials).      The book shelve was constructed in the institute. (I.M.T Enugu).       However, before the... Continue Reading

ABSTRACT The project title “fabrication of flow nozzle†was done by a selected group of Engineering Students and the practiced objective (aim) of the project was centered on constructing a nozzle that is capable of transporting fluid from one to the other, to determine the charge in velocity of the moving fluid across two given areas of... Continue Reading

ABSTRACT The constructional project involved the construction of an industrial barrow of standard size was constructed. The process used went across various Engineering practice. These involved the procurement of galvanized steel of 0.00mm to 300mm thickness. Some galvanized steel rods and pipes were also used for the construction.  The... Continue Reading

ABSTRACT Wheelbarrow is a simple machine, which belong to the second-class lever. This is because the load or resistance is placed between the effort and the fulcrum. It is used in many areas of work to convey loads that are too heavy or bulky to be carried by hand. Wheelbarrow can be used as farm equipment, industrial equipment among others.... Continue Reading

ABSTRACT This is an abstract on the construction of a packed distillation column. A packed distillation column is used in the separating process distillation that is the separation of two miscible liquids.  It was constructed by marking out the dimension of the column, condenser, pot, using steel rule scriber, oxyacetylene flame was used for... Continue Reading

ABSTRACT Propeller agitator is a specialized of various types of substances.  It consists of three basic components which are the shaft, blade and the vessel. In the construction, mild steel was chosen due to it’s inherent properties.  After the procurement, the following constructional operations were carried out which included marking... Continue Reading

ABSTRACT The aim of this project was to construct shell and tube heat exchanger with fixed boundless. A heat exchanger that would cool 5 x 5 x 10 – 3 kg/s of steam at a calculated heat load of 152 – 395/S was fabricated. The steam is to reach the heat exchanger from a distillation column at a temperature of 300k. The specification of... Continue Reading