Recent Mechanical Engineering Project Topics and Materials

Showing 1 - 25 of 419

1) DESIGN ANALYSIS OF HCCI ENGINE PISTON

The piston is a heart of the engine and its working condition is the most exceedingly bad one of the key parts of the engine in the workplace. A piston is a segment of responding piston, responding pumps, gas compressors and pneumatic chambers, among other comparative systems. It is the moving part that is contained by a barrel and is made... Continue Reading

2) DESIGN AND DEVELOPMENT OF A HYBRID BICYCLE

This project involved the conversion of a conventional bicycle into an electric hybrid  bicycle using a hub motor, battery, controller, throttle, and battery indicator. The  selection of a flywheel-based regenerative mechanism was justified based on its  superior energy storage capabilities. The challenges faced during the assembly,  including... Continue Reading

3) BASIC PRINCIPLE OF MACHINING AND ARC WELDING

ABSTRACT This project tittle ‘’basic principle of machining’’ deal with the operations on lathe, milling and some part of arc welding, turning, taper turning, threading, knurling and chamfering, while on milling machine spur Gears were cut, forming a hexagon shape and square shape were all done on milling machine. A simple component/part... Continue Reading

4) AN EVALUATION OF THE PROSPECTS AND CHALLENGES OF AUTOMECHANIC WORKSHOPS IN THE INFORMAL SECTOR IN THE KUMASI METROPOLIS

ABSTRACT The study explored the prospects and challenges in the informal auto-mechanic sector focusing on auto-mechanics enterprises within the Kumasi Metropolis. Specifically, the study sought to examine the prospects of the auto-mechanic enterprises, examine the challenges facing auto-mechanic enterprises, and the preparedness of auto-mechanics... Continue Reading

5) ASSESSING THE WAYSUDE WELDERS' APPLICATION OF SAFETY MEASURES IN WELDING: A CASE STUDY OF JAMAN NORTH DISTRICT

ABSTRACT Safety is a critical consideration for any welding project. Application of safety  measures and practices among welders are important ways of preventing or reducing  the levels of health hazards associated with the occupation. While adherence to these  precautions is nearly applied in the industrial welding, for the non-industrial... Continue Reading

6) SCRAP METAL MANAGEMENT PRACTICES IN THE KUMASI SUAME MAGAZINE INDUSTRIAL AREA OF THE ASHANTI REGION OF GHANA: CHALLENGES AND PROSPECTS

ABSTRACT  This study was conducted in the Kumasi Metropolis to assess the scrap metal management  practices in the Suame Magazine industrial area.  Today with increasing public awareness  and research into the many environmental implications, metals recycling is now of paramount  importance due to a number of reasons. The study sought to... Continue Reading

7) SKILL IMPROVEMENT NEEDS OF SELF-EMPLOYED TECHNICAL COLLEGE MOTOR VEHICLE MECHANICAL GRADUATES IN PLATEAU STATE

ABSTRACT The study was carried out to determine the skill improvement needs of self-employed technical college motor vehicle mechanic graduates in Plateau State. A survey research design was used for the study. The population for the study was 66 self-employed technical college motor vehicle mechanic graduates, 15 supervisors from automobile... Continue Reading
  • Type:Project
  • ID:MCE0413
  • Pages:150

8) DESIGN AND FABRICATION OF MINI COPULA FURNACE AND AN ATOMIZER FOR THE PRODUCTION OF POWDERED METAL FROM WASTE ALUMINIUM CANS

ABSTRACT This research is centered on the design and fabrication of copula furnace and atomizer for the production aluminium powder metal with the available material.0.4kg of refined coke was chosen as the basis for material and energy balance calculations and the design calculations performed from whose values are used to produce the design... Continue Reading
  • Type:Project
  • ID:MCE0412
  • Pages:108

9) DESIGN OF MANUAL CHIP PACKAGING MACHINE

ABSTRACT Packaging of food which is viable means of  business opportunity has been exploited by individuals and corporate bodies for a very long time because the importance of packaging food products are very enormous ranging from protection of the product to preventing the food from spoiling. There is no way one can successfully go into business... Continue Reading

10) DESIGN OF A HUDRAULIC ESCALATOR

ABSTRACT An escalator is a moving staircase conveyor transport device for carrying people between floors of a building. The device consists of a motor-driven chain of individual, linked steps that move up or down on tracks, allowing the step treads to remain horizontal. Escalators are used around the world to move pedestrian traffic in places... Continue Reading

11) AUTOMATIC TEMPERATURE CONTROL IN VACUUM BRAZING FURNACE USING P.L.C

ABSTRACT Brazing alloys used for brazing the components of gas turbines and aerospace applications contain nickel as the base material. Nickel has highest affinity for oxygen. Incase if components are brazed using nickel as based filter material in air or atmosphere the braze joint will porous and braze strength is not achievable. To avoid the... Continue Reading

12) DESIGN AND FABRICATION OF AN AIR COMPRESSED ENGINE

ABSTRACT The designed Air Driven Engine is an economic friendly engine which operates with the aid of a compressed air. In principle, an Air Driven Engine uses the expansion of compressed air to drive the pistons of an engine. An Air Driven Engine is a pneumatic actuator that creates useful work by expanding compressed air. There is no mixing of... Continue Reading

13) DESIGN AND FABRICATION OF AN AIR DRIVEN ENGINE

ABSTRACT: The designed air driven engine is an economic friendly engine which operates with the aid of a compressed air. in principle, an air driven engine uses the expansion of compressed air to drive the pistons of an engine. an air driven engine is a pneumatic actuator that creates useful work by expanding compressed air. there is no mixing of... Continue Reading

14) MACHINE TOOL CONTROL

INTRODUCTION  The purpose of a control system is to produce a desired output. This output is usually specified by a command input, and is often a function of time. For simple applications in well structured situations, to control, and the controller must have the capability of reacting to disturbance, changes in its environment, and new input... Continue Reading

15) ENGINEERING DRAWING IN TERMS OF COMMUNICATION

INTRODUCTION Communication means extending information form one person to another in a way in which it can be understood. Information and ideas in technical and scientific fields can very often be more easily communicated through sketching or instrument drawing and blueprint reading. Drawing involves describing the shape and size of an object. ... Continue Reading

16) DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTO-TRANSFORMER OF RATING IKVA, 240V/110, 80 12V, 6V

ABSTRACT This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the output (secondary). It is considered as a single coil in series with the supply and a common coil to... Continue Reading

17) DESIGN AND FABRICATION OF CREEP MATERIAL TESTING EQUIPMENT

ABSTRACT The process involved in the design and fabrication of a creep material testing equipment ranges from carrying out the feasibility studies of the project to the designed and especially of ensuring its functionality.  Since it is used in the testing of failure of material under loading, different engineering principles employed in the... Continue Reading

18) DESIGN AND FABRICATION OF 80CM X 70CM X 50CM MOBILE DEEP FREEZER

ABSTRACT  The need for an authentic and reliable report relating to the design and construction of 80cm x 70cm x 50cm mobile deep freezer is inevitable. It should be a top priority of every individual in order to avoid huge expenditure in purchase to foreign ones. Its for this reason that this report is written for the benefit of those who are... Continue Reading

19) THE CONSTRUCTION OF INDUSTRIAL FAN FOR WORKSHOP USE

ABSTRACT   This work is aimed at the removal of hazardous gases and dust particles, air channeling etc. This work is aimed at achieving industrial waste control therein safe – guarding the immediate environment.  Chapter one accounts for the introduction of the project. Chapter two involves literature review in the origin, types and... Continue Reading

20) THE DESIGN AND COSNTRUCTION OF 1000KWA STABILIZER A PROJECT PRESENTED TO THE DEPARTMENT OF ELECTRICAL/ELECTRONICS ENGINEERING

ABSTRACT Despite all attempt of the federal government to have not only an uninterrupted power supply for all cities in Nigeria, but a voltage that is inconformity with the recommended 220/230v for domestic consumption for example.  The NEPA Plc is facing some difficulties in generating, transmitting and distributing the required voltage... Continue Reading

21) CONSTRUCTION OF AN INTRUDER ALARM SYSTEM

ABSTRACT The intruder alarm system was designed and build in order to let the industrial and commercial company know how important alarm system is all about. These can be of Good help if the intruder will look through this project and support for the development of this project as to let the Federal Government know that the young engineering of... Continue Reading

22) DESIGN AND CONSTRUCTION OF VOLTAGE INVERTER SYSTEM WITH TRICKLE CHARGING SYSTEM

ABSTRACT This project is he design and construction of a voltage inverter system with trickle charging system. This device is design to provide power supply for the need of offices, household etc. In absence of NEPA power supply. It would also prevent harm to our appliances caused by power holding company LTD (NEPA) Random power outage . TABLE OF... Continue Reading

23) REPAIR AND REHABILITATION OF A FAULTY DEEP FREEZER IN THE MECHANICAL ENGINEERING DEPARTMENT

ABSTRACT  Mechanical Engineering Department of the named Institute has many non – operational malhiues. Sequel to the fact, maintenance was poorly excuted which resulted to the breakdown deep freezer. Quality and effectiveness of machine maintenance were well observed. Also, a minimized maintenance and a highly successful  repair was adopted.... Continue Reading

24) POWER AMPLIFIER34

INTRODUCTION Power amplifier is an electronic device, which is used to increase sound energy.  In other words, the final stage which must driven a given load e.g mechanical indicator, a loudspeaker cathode roy tade, magnetic deflection coil, a transmitting accrual of a communication network.  Power amplifier is also used in regulation power... Continue Reading

25) DESIGN AND IMPLEMENTATION OF SIMPLE SCIENTIFIC CALCULATOR.

ABSTRACT This work was centered on the Design and implementation of a simple scientific calculator for education organization. The  study traced calculator system as a tool to completely change mathematical knowledge and sophisticated problems solving strategies had advanced the field of simulated engine in mathematic. This project work also... Continue Reading
Need help with your Mechanical Engineering Project Topic? Click here to request assistnce or reach us on + 234 813 0686 6500
whatsappWhatsApp Us