A GSM BASED HOME AUTOMATION USING AVR

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0453
  • Access Fee: ₦5,000 ($14)
  • Pages: 53 Pages
  • Format: Microsoft Word
  • Views: 595
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT
With advancement of technology things are becoming simpler and easier for us. Automatic systems are being preferred over manual system. The purpose of this project is to design and construct A GSM based home automation using AVR. Using GSM networks, in this project a home power control system has been proposed that will act as an embedded system which can monitor and control appliances and other devices locally using built-in input and output peripherals. The system has a delay of 2 minutes after the first call to initiate the next command. This project is made up of four vital units. These units are as follows: GSM module unit, peripheral interface control (PIC) unit, driver unit and a power monitoring and control unit. The GSM module is a GSM transceiver which gives the system access to the GSM service provider. The peripheral interface control (PIC) is programmed to carry out the OFF/ RESET operation according to the GSM commands while the driver and control unit consist of capacitors, resistors, diodes, regulators and electromagnetic relay is to effect power switching. The major component that performed the power control of 220v main supply and the automatic voltage regulation (AVR) is the automated electromagnetic relay. The project was realized.
 
TABLE OF CONTENT   
Title page- - - - - - - - - - -i
Certification page- - - - - - - - - -ii
Dedication- - - - - - - - - - -iii
Acknowledgement- - - - - - - - -iv
Abstract- - - - - - - - - - -v
Table of content- - - - - - - - - -vi

CHAPTER ONE: 
INTRODUCTION     
1.1 Introduction To The Project- - - - - - -1
1.2 Background Of Study- - - - - - - -2
1.3 Problem Statement- - - - - - - - -3
1.4 Aims And Objectives- - - - - - - -4
1.5 Scopes And Purpose Of System Specification- - - - -5
1.6 Limitations- - - - - - - - - -6

CHAPTER TWO: 
LITERATURE REVIEW    
2.1 Review of Related Works-  - - - - - -9
2.2 Home Automation System- - - - - - - -9
2.3 Brief History of Tone Recognition Device-- - - - -11
2.4 History of Home Automation- - - - - - -12
2.4.1 The Mechanical Evolution- - - - - - -13
2.4.2 The Electrical Evolution- - - - - - - -14
2.4.3 The Information Revolution- - - - - - -15
2.5 Smart Home Today- - - - - - - - -16
2.6 Aspects of Automation Speech Recognition (ASR) Device- - -18

CHAPTER THREE: 
SYSTEM ANALYSIS AND METHODOLOGY
3.1 Hardware Subsystem- - - - - - - -22
3.2 System Analysis- - - - - - - - -23
3.3 Regulation Unit- - - - - - - - -28
3.4 The Power Supply - - - - - - - - -30
3.5 The Microcontroller- - - - - - - - -30
3.6 The System Flow Chart- - - - - - - -31

CHAPTER FOUR: 
CONSTRUCTION AND COMPONENT LIST
4.1 Construction-  - - - - - - - - -37
4.2 Constructional Methods- - - - - - - -37
4.3 Power Supply Unit (PSU)- - - - - - - -38
4.3 Mounting of Components- - - - - - - -40
4.4 Interconnection of Components- - - - - - -40
4.6 Bill of Engineering Materials and Evaluation (BEME)- - -42
 
CHAPTER FIVE: 
RECOMMENDATION, CONCLUSION AND CONSTRAINTS
5.1 Conclusion- - - - - - - - - -44
5.2 Recommendation- - - - - - - - -44
5.3 Major Constraint- - - - - - - - -45
5.4 Constraint Consideration- - - - - - - -45
5.5 Technology Consideration- - - - - - - -46
REFERENCE- - - - - - - - - -47

INTRODUCTION 
With advancement of technology things are becoming simpler and easier for us. Automation is the use of control systems and information technologies to reduce the need for human work in the production of goods and services. In the scope of industrialization, automation is a step beyond mechanization. Whereas mechanization provided human operators with machinery to assist them with the muscular requirements of work, automation greatly decreases the need for human sensory and mental requirements as well. Automation plays an increasingly important role in the world economy and in daily experience. Automatic systems are being preferred over manual system. Through this project we have tried to show automatic control of a house as a result of which power is saved to some extent. GSM based home automation using AVR is an electronic device that allows a GSM cell phone to monitor and shut down electrical power supply at home where there are emergency or ugly situations such as fire outbreak, lightning strikes, switching surges, transients, neutral failure and other abnormal conditions or malfunctions that can destroy lives and properties. 
 
GSM based home automation using AVR is a system that implements the emerging applications of the GSM technology which enable the users to carry out some task from anywhere in the world via a GSM network, and the system will automatically regulates power surge. The system is made up of a GSM amplifier unit, PIC12f629 microcontroller, power control and a power supply unit. These sub circuits are designed using passive and active electronic components like capacitors, resistors, diode, regulators, transistors, electromagnetic relay, microcontroller and battery.

A GSM BASED HOME AUTOMATION USING AVR
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0453
  • Access Fee: ₦5,000 ($14)
  • Pages: 53 Pages
  • Format: Microsoft Word
  • Views: 595
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Electrical Engineering
    Project ID ELE0453
    Fee ₦5,000 ($14)
    No of Pages 53 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT  With advancement of technology things are becoming simpler and easier for us. Automatic systems are being preferred over manual system. The purpose of this project is to design and construct A GSM based home automation using AVR. Using GSM networks, in this project a home power control system has been proposed that will act as an... Continue Reading
    ABSTRACT With advancement of technology things are becoming simpler and easier for us. Automatic systems are being preferred over manual system. The purpose of this project is to design and construct A GSM based home automation using AVR. Using GSM networks, in this project a home power control... Continue Reading
    ABSTRACT With advancement of technology things are becoming simpler and easier for us. Automatic systems are being preferred over manual system. The purpose of this project is to design and construct A GSM based home automation using AVR. Using GSM networks, in this project a home power control system has been proposed that will act as an embedded... Continue Reading
    ABSTRACT Nowadays, most of the conventional home automation systems are designed for special purposes but this system proposes an all-in-one general purpose home automation system that can be easily be implemented in new and existing homes. 'The aim is to develop a reliable, compact, fast and low cost smart home automation system, based on... Continue Reading
    Abstract Internet of things (IoT) has provided an opportunity for technology to be used to solve more complex problems and understand a lot more processes and activities by collecting and analyzing data. The growing demand for electricity in Ghana has been coupled with the increase in cost of providing this basic amenity. The homeowner has been... Continue Reading
    ABSTRACT The advantage of cellular communication like GSM technology is a potential solution for such remote controlling activities. GSM-SMS technology can be used to control household appliances from remote places. Remotely, the system allows the home owner to monitor and control his house appliances via his mobile phone set by sending commands... Continue Reading
    ABSTRACT The advantage of cellular communication like GSM technology is a potential solution for such remote controlling activities. GSM-SMS technology can be used to control household appliances from remote places. Remotely, the system allows the home owner to monitor and control his house appliances via his mobile phone set by sending commands... Continue Reading
    ABSTRACT  The advantage of cellular communication like GSM technology is a potential solution for such remote controlling activities. GSM-SMS technology can be used to control household appliances from remote places. Remotely, the system allows the home owner to monitor and control his house appliances via his mobile phone set by sending commands... Continue Reading
    ABSTRACT This project presents a design and implementation of new advanced Securitypower control using Android power switch system that uses WiFi technology as anetwork infrastructure connecting its parts. The proposed system consists of twomain components; the first part is the server (web server), which presents systemcore that manages,... Continue Reading
    ABSTRACT The advantage of cellular communication like GSM technology is a potential solution for such remote controlling activities. GSM-SMS technology can be used to control household appliances from remote places. Remotely, the system allows the home owner to monitor and control his house appliances via his mobile phone set by sending commands... Continue Reading
    Call Us
    whatsappWhatsApp Us