Recent Electrical Engineering Project Topics and Materials (Page 8)

Showing 176 - 200 of 530

176) CONSTRUCTION OF A 2.8KVA FUEL-LESS GENERATOR

Abstract In this work, a 2.8kva alternator was coupled to a 4 H.P dc motor acting as a prime mover to produce a fuel-less generator. The coupling was done using two crankshaft pulleys to match the speed of the alternator to that of the dc motor. Two 24v dc deep cycle batteries were also used as the exciter unit and a sustainable output voltage of... Continue Reading

177) DESIGN AND CONSTRUCTION OF A SOLAR POWERED MULTIPLE CELL PHONES CHARGING BOOTH

ABSTRACT Cell phones need electric sources to charge their batteries in order to work, but there are people in developing and third world countries that find it hard to access electric sources.In an attempt to provide an alternative means of charging to those unfortunate areas in third world and developing countries, a solar powered cell phone... Continue Reading

178) DESIGN AND CONSTRUCTION OF ELECTRICAL CODED DOOR LOCK SYSTEM

ABSTRACT Whenever we think of redefined security, we think of coded electrical door lock. It is a microcontroller based security door lock that can be used in homes, offices, laboratories, etc. for more reliable and high fidelity door control system, powered by electrons panel or electromechanical panels. Due to high rate of insecurity, especially... Continue Reading

179) DESIGN AND CONSTRUCTION OF A FAN SPEED CONTROL SYSTEM

                       Abstract This temperature control fan can be controlled using a microcontroller when it detects a certain temperature that has been set. The purpose of this project is to prevent the waste of voltage usage when it is not hot enough for fan to be needed. The temperature control fan has three different speeds. Each... Continue Reading

180) INVESTIGATION ON HEAT DISSIPATING PROPERTIES OF ELECTRONIC COMPONENTS WITH THE AIM TO DETERMINE THE CORRECT SIZE OF HEAT SINK

Research and optimization of cooling of electronic components using heat sinks becomes increasingly important in modern industry. Numerical methods with experimental real world verification are the main tools to evaluate efficiency of heat sinks or heat sink systems. In this research, the physical problems associated with heat removal of... Continue Reading

181) THE DESIGN AND IMPLEMENTATION OF RADIO FREQUENCY COMMUNICATION LINK

ABSTRACT The aim of this project, the design and implementation of an RF communication link, is to design a communication link between a source and a destination and study the properties of the signal being generated by the source (generator). The area of interest in this work is how the signal suffers limitations like attenuation, interference... Continue Reading

182) DESIGN OF SOLAR STREET LIGHT SYSTEM FROM UCC WEST GATE TO ELMINA

Content   Pages   DECLARATION ii ACKNOWLEDGEMENT iii DEDICATION iv TABLE OF CONTENT v CHAPTER ONE Introduction 1 1.1 Background of the Study 1 1.2 Problem of Study 2 1.3 Objectives of Study 3 1.4 Scope of Study 3 1.5 Significance 4 CHAPTER TWO Literature Review 5 2.1 Introduction 5 2.2 Types of Street Lights 6 2.3 Photovoltaic Effect/Process 9... Continue Reading

183) COMPARATIVE ANALYSIS OF INTERNET PERFORMANCE OVER 3 SITES WITH AND WITHOUT VPN

    ABSTRACT Nowadays, there is an increase in the demand to connect to the internal networks of organizations by their branches from distant locations. Members of such organizations often need to access internal networks from their homes, hotels or other far away business places and external networks over the internet which is insecure by... Continue Reading

184) 2.5KVA AUTOMATIC VOLTAGE REGULATOR (AVR)

ABSTRACT The AVR is an automatic voltage regulator and it is a device which is used to regulate or stabilize electrical power supply for electrical or electronic appliances. Inthisprojecttherefore,weareinterestedintheconstructionof this allimportantdevice.Furthermore we shalldiscuses the techniques,processes,switching stages and then the working... Continue Reading

185) A PHASE FAULT DETECTOR FOR POWER TRANSFORMER

ABSTRACT A power  transformer is a very  simple device. It  is a vital  link in the  electronic  distribution  system. A power transformer is associated with faults.  The design and construction of the phase fault detector is to provide simple, reliable and comprehensive electrical phase fault detections and response system. The system ... Continue Reading

186) MICRO CONTROLLER BASED SMART UNDER AND OVER VOLTAGE PROTECTION DEVICE

This Project present the design and construction of a microcontroller based under and over voltage protection device, which is achieved using a microcontroller, transistor and other discrete components. A microcontroller PIC16F877A is at the heart of the device which performs the major control of the device. The device is simple and low cost. It... Continue Reading

187) DESIGN AND CONSTRUCTION OF HOME AUTOMATION USING WIFI

ABSTRACT This project presents a design and implementation of new advanced Securitypower control using Android power switch system that uses WiFi technology as anetwork infrastructure connecting its parts. The proposed system consists of twomain components; the first part is the server (web server), which presents systemcore that manages,... Continue Reading

188) AUTOMATED DOOR CONTROL SYSTEM WITH INTRUDER LOCK AND SMS NOTIFICATION

This work is on design and Construction of Automated door security system with GSM notification. Is an electrical Electronics Engineering Project.... Continue Reading

189) DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED PREPARED ENERGY METER

BSTRACT Automatic door control is becoming popular due to its numerous benefits. Automatic door control refers to the control of doors and domestic features by just sensing the present of human being at door and automatically open the door with the persons interface or by remote control. Artificial Intelligence provides us the framework to go... Continue Reading

190) DESIGN AND CONSTRUCTION OF A POWER INVERTER

ABSTRACT Power inverter is an electrical appliance that can be used with DC battery as an alternativesource of energy supply in the event of power failures and energy crisis. It is cheap, clean,very conducive and silent when in operation and a very reliable source of power supply as togenerator. Modern research and technologies have shown that... Continue Reading

191) DESIGN AND CONSTRUCTION OF SMART CARD SECURITY SYSTEM

ABSTRACT This project shows the construction of a microcontroller based security door using Smart card. It is aimed towards programming the microcontroller to control the Hardware in sliding door. The system consists of a microcontroller 89S52 which Sends a signal to the multiplexers on insertion of the smart card in the card slot. The... Continue Reading

192) DESIGN AND CONSTRUCTION OF MINI-STAINLESS OVEN WITH A TWO AND ONE SHUTDOWN SYSTEM

Abstract The aim of this work is to characterize properties and microstructure of stainless steel used as a coating on welding of carbon steel sheets. Two carbon steel plates were set as the metal base and the stainless steel coating was applied on the weld bead. The applied process used was the submerged arc welding (SAW) and tests were carried... Continue Reading

193) E-ACADEMIN: A WEB BASED APPLICATION FOR RE-ENGINEERING ACADEMIC ADMINISTRATION

ABSTRACT Most organizations are deploying e-business solutions because of its numerous advantages, such as, increased productivity, reduced transactions costs, wider coverage and increased speed to market. The present academic offices in developing countries still use paper-based approach for most of their activities. Data and information are... Continue Reading
  • Type:Project
  • ID:ELE0339
  • Pages:169

194) NILM- BASED SYSTEM FOR ENERGY MONITORING OF COMPOUND HOUSES IN GHANA

Abstract Compound housing is a housing arrangement that stemmed from cultural family living settings. Over the years, it has evolved to denote a group of different households that share a number of utilities including electricity. Electricity bills and payments are a concern in such living units due to the inability to split bills fairly. Previous... Continue Reading

195) DЕTЕRMІNІNG THЕ BЕST LΟАD SCHЕDULІNG АLGΟRІTHM FΟR А HΟMЕ WІTH ЕLЕCTRІCІTY SUPPLY FRΟM GRІD АND SΟLАRDЕTЕRMІNІNG THЕ BЕST LΟАD SCHЕDULІNG АLGΟRІTHM FΟR А HΟMЕ WІTH ЕLЕCTRІCІTY

Аbstrаct Іmprοvіng еnеrgy еffіcіеncy іs bеcοmіng іncrеаsіngly crіtіcаl tο rеducе thе еnеrgy cοnsumptіοn аnd tο sοlvе thе еnvіrοnmеntаl crіsіs. Thе fοllοwіng cаpstοnе rеpοrt dеscrіbеs а mіxеd-іntеgеr lіnеаr prοgrаmmіng οptіmіzаtіοn аlgοrіthm tο mіnіmіzе thе pеаk... Continue Reading

196) DETERMINING THE LOCATION OF A BUS IN REAL-TIME USING LORA TECHNOLOGY

Abstract Travelers without prior information about the bus they are waiting, often waste time at bus stations which affects their day activity plan. GPS receivers are used to address this problem by providing real-time about the location of the bus, however, it is quite expensive and power consuming to use and every bus needs to have a GSM/GPRS... Continue Reading

197) AN AFFORDABLE DENSITY-BASED TRAFFIC MANAGEMENT SYSTEM

Abstract Traffic management systems at road intersections of most African cities is based on fixed timings where equal length of green light is assigned to each lane at the intersection. This method of traffic management is inefficient because it causes unnecessarily long waiting times for vehicles at the intersections especially during periods... Continue Reading

198) THE DESIGN & FABRICATION OF AN EPILEPTIC SEIZURE DETECTION WATCH

Abstract This paper describes the design and fabrication of an epileptic seizure detection watch for the timely detection of Generalized Tonic-Clonic (GTC) seizures; using skin conductance (SC) signals. The watch’s circuit was designed in EasyEDA and implemented on a Breadboard to showcase the dispatch of a seizure event alert to a phone via a... Continue Reading

199) SOLAR TRACKING USING REFLECTING MIRRORS CAPSTONE PROJECT

Abstract Solar Energy is the fastest growing renewable energy source in the world. The soaring production and the significant technological breakthrough of solar energy in certain countries like China and India has brought about a drastic reduction in the cost of its exploitation. Today, the price of solar PV panels in China has declined by as... Continue Reading

200) LOW COST VEHICLE DRIVING ASSISTANCE SYSTEM

Abstract The project intends to increase vehicle operator awareness with the integration of a Low-Cost Driving Assistance system in older car models. Situational awareness during driving significantly reduces the number of road traffic accidents, as proved by literature. A 4-wheel mobile robot is used as the plant representing a vehicle for easier... Continue Reading
Need help with your Electrical Engineering Project Topic? Click here to request assistnce or reach us on + 234 813 0686 6500
whatsappWhatsApp Us