ABSTRACT The very fundamental reasons behind this project assignment is to expose student to the very important aspect of private and independent research work not only theories but also subsequent translation of the theoretical research work into a particular function system. The project construction of automatic fence light controller has been... Continue Reading
The major aim and objective of this design [of a patient heartbeat and temperature monitor using RF.] is to help the doctors and family members to keep track of the heartbeat condition of their loved ones [as well as their body temperature] in the case of an abnormality in the health condition (for those with heartbeat defects and those that run... Continue Reading
The power system is a highly nonlinear system that operates in a constantly changing environment; loads, generator outputs, voltage controllers, transmission lines, topology, and key operating parameters change continually. The behavior and output of the generators can be affected in a transient conditions. This transient condition can change the... Continue Reading
Abstract In this project we designed a solar powered computer control system for electrical machines and spark ignition engines. It is made up of a hardware device that comprises of various electrical components which are powered by a 25W solar panel. The power cord of the machines are modified and connected to the hardware and the ... Continue Reading
ABSTRACT Power interruption and failure does not promote development. Investors and private organization do not feel secure to establish a business in a country with constant or frequent power failure. Power interruption limits the development of industries, commerce, businesses and seriously effects the economic development of any nation. There... Continue Reading
ABSTRACT The advantage of cellular communication like GSM technology is a potential solution for such remote controlling activities. GSM-SMS technology can be used to control household appliances from remote places. Remotely, the system allows the home owner to monitor and control his house appliances via his mobile phone set by sending commands... Continue Reading
Abstract This temperature control fan can be controlled using a microcontroller when it detects a certain temperature that has been set. The purpose of this project is to prevent the waste of voltage usage when it is not hot enough for fan to be needed. The temperature control fan has three different speeds. Each... Continue Reading
ABSTRACT An oven is a heated enclosure for heating, baking or drying. An electric oven is a heating device used to heat materials to high temperature when electric current is passed through a high resistance heating element (coil or plate). Electric ovens can fine their application in many fields and area of discipline like factories, research... Continue Reading
As we know, nowadays issues in the agriculture field are a major concern. According to the Union Minister of Agriculture and Farmers Welfare Narendra Singh Tomar, 5,579 Indian farmers died by suicide in 2020. There are many conflicting reasons for farmer suicides which are mentioned by Activists and scholars but high debt burdens,... Continue Reading
ABSTRACT This project presents a 40A maximum power point tracking solar charge controller. The MPPT charge controller tries to keep the voltage and the power stable. The MPPT charge controller will harvest more power from the solar array – it will adjust its input voltage to harvest the maximum power from the solar array and then transform this... Continue Reading
The household lighting cost accounts for 10% of the electric bill, changing the light bulbs effectively can reduce the long term energy costs significantly. In Nigeria, where less than one percent of the population has access to 24 hours of interrupted power supply there is a need for a complementary, renewable source of light which provides... Continue Reading
ABSTRACT The battery which has always serve as a sources of electrical current has in the past been invalid and inmost cases seen as monument after implicating as battery wound have to be brought over and over again the implicating has been that of lot of money is been spent for this purpose we give appraise for the advancement of technology... Continue Reading
PREFACE The aim of this project is to construct power amplifier. The system is expected to amplify. The major components in the circuit is the integrated circuit (IC JRE with some circuit elements for the normal operation of the circuit. So as to amplifier an output, the general construction dealt with in the chapters. The levels of... Continue Reading
ABSTRACT This work is a power supply monitoring device that triggers a buzzer when the mains supply cuts off. Thus a diode (bridge rectifier diode) was used to convert the AC voltage to DC voltage and the 240v/12v AC mains power transfer was used with a bridge rectifier for rectification and a 470Nf filter capacitor C1 for the smoothing of the... Continue Reading
ABSTRACT It has become inevitable that there would be communication and due to the inherent limitation of the human voice, the public address system came to being. A public address or “P.A SYSTEM” is an electronic amplification system with a mixer ,amplifier and loudspeakers, used to reinforce a given sound , e.g a person making a speech,... Continue Reading
ABSTRACT This write up is a detail of the process and information of plan for the physical realization of the construction of the 1M3 mobile deep freezer. It is divided into chapters, which discussed extensively the practical refrigeration cycle with full attention given to design factors working principle and choice of material. The method used... Continue Reading
Abstract As the growing population of human race widens the gulf between energy supply and energy demand, the imbalance in energy availability sent researchers into excavating for a way of settling this age long squabble. A lasting solution is vested on alternative use of the renewable energy source, a project that is yet to be widely applied.... Continue Reading
Abstract Traffic management systems at road intersections of most African cities is based on fixed timings where equal length of green light is assigned to each lane at the intersection. This method of traffic management is inefficient because it causes unnecessarily long waiting times for vehicles at the intersections especially during periods... Continue Reading
TABLE OF CONTENTS CHAPTER ONE (1) INTRODUCTION 1.0 BACKGROUND 1.1 OBJECTIVE OF THE PROJECT DESIGN 1.2 SCOPE OF THE PROJECT 1.3 THE PIC MICROCONTROLLER 1.4 THE HARDWARE 1.4.1 The Circuit Components 1.4.2 Screen 1.5 POWERING THE PROJECT 1.6 PROJECT REPORT ORGANIZATION CHAPTER TWO... Continue Reading
ABSTRACT This project deals with the design and development of restaurant order meal system, in order to reduce the number of staff. In meal ordering project, you can request for any kind of food or drinks available in the restaurant which contains the menu embedded in each button. Microcontroller is the central processing unit CPU of this project... Continue Reading
INTRODUCTION This project presents the design and construction of a computer based program used to control office appliance. It is based on a Graphic user interface (GUI) programming language (Visual Basic 6.0), Parallel Port Interactive Mode, Opto-Coupler Isolation of the computer from the appliance to prevent damage to the system should a... Continue Reading
ABSTRACT Blender is an electric machine for size reducing soft food or liquid mixture. Blender is some time called liquidizer consists of a glass jar or jug containing a steel blade assembly at the base driven by a small electric motor. Construction of blender was done based on the principle of size of reduction using electric motor as the major... Continue Reading
ABSTRACT Waste and residuals are undeniably part of the human society. The accumulation of these materials and the “throw away” philosophy results in many environmental and health issues and safety hazard problems prevent sustainable development in terms of resource recovery and recycling of waste materials. The carbon sources in the waste can... Continue Reading
ABSTRACT The purpose of this project was to design and develop a Computer Based Testing (CBT) system in order to facilitate the process of conducting e-examinations especially in tertiary institutions. There is a growing need to find an easy and effective way to carryout continuous assessments for the increasing population of students. The CBT... Continue Reading
ABSTRACT The present invention relates to an improved control system for starting a three phase induction motor comprises improved power contactors configured to have a pair of three pole delta and main contactors, and a single pole star contactor for supplying AC power to star position and delta position, a timer for controlling AC power supply... Continue Reading