Most Read Electrical Engineering Project Topics and Materials (Page 16)

Wireless power transfer (WPT) technologies have been widely used in many areas, e.g., the charging of electric toothbrush, mobile phones, and electric vehicles. This project introduces fundamental principles of three WPT technologies, i.e., inductive coupling-based WPT, magnetic resonant coupling-based WPT, and electromagnetic radiation-based WPT,... Continue Reading

ABSTRACT With advancement of technology things are becoming simpler and easier for us. Automatic systems are being preferred over manual system. The purpose of this project is to design and construct A GSM based home automation using AVR. Using GSM networks, in this project a home power control system has been proposed that will act as an embedded... Continue Reading

ABSTRACT T-junction traffic light controller is such a device that will play a significant role in controlling traffic at junctions, to ease the expected increased rush at such junctions and reduce to minimum disorderliness that may arise, as well as allowing the pedestrians a right of the way at intervals rather than being struck down when in a... Continue Reading

ABSTRACT This research work designs a wireless power transfer system (WPT) for non smart phones as an alternative to existing wired power supply systems for these devices. Initially, the general concept of known WPT systems and methods are introduced and reviewed. It was noted that most existing WPT models do not consider external interferences in... Continue Reading

Abstract More than 2.2 million Ghanaian families in rural areas depend on firewood and charcoal as fuel for cooking [1]. This high dependency is taking a toll on forest resources due to rampant deforestation. “Ghana's forest cover, which stood at 8.2 million hectares in 1900, has now been reduced to about 1.2 million hectares, with an estimated... Continue Reading

ABSTRACT Electricity is fundamental and inevitable to our daily living as it lighting our environment, powers our homes, schools, hospitals, offices, businesses, and aid industrialization, It is a known phenomena that the economic growth of a nation rides on the wheel of electricity. While the telecommunication market in Nigeria has recorded... Continue Reading

TABLE OF CONTENTS DECLARATION................................................................................................................................. i APPROVAL....................................................................................................................................... ii... Continue Reading

ABSTRACT The document outlines an investigation done in order to study Fifth Generation (5G) systems and to identify a role that satellite systems will play in contribution to the many advanced and diverse demands on existing telecommunication networks. This next generation network is a build-up and phenomenal improvement in wireless communication... Continue Reading

ABSTRACT No one form of power can sustain a nation. The ever increasing demand for electrical power has arisen from our lifestyles with revolves around electric power to speed up processes of development such as manufacturing, service provision and general well being of man. The need for the provision of quick but minute energy to prevent the... Continue Reading

ABSTRACT   This project, 12v battery charge consist of few chapters, deal extensively with the design and construction of a batter charge which is capable of charging a 12v battery. The introductory chapter goes a long why in defining the battery charger and explanations of the mode of operations will be death with as we proceed.     TABLE OF... Continue Reading

ABSTRACT Most industrial and commercial processes are dependent on electrical power. Power failure or outage in general does not promote development in public and private sectors. The investors do not feel secure to come into a country with constant or frequent power failure. This limits the development of industries.In addition there are... Continue Reading

ABSTRACT The Airbeetle-18 unmanned Aircraft is an Aircraft design for the purpose of surveillance following the fact that the parent Airbeetle-18 has almost reached the end of its life time. Hence, there is need to convert it to an unmanned aircraft in other to extend its service life time. A comprehensive literature review was carried out on... Continue Reading

ABSTRACT Automatic water level controller for both overhead and underground tank is designed to monitor the level of water in a tank. It displays the level of water and when it is at the lowest level; a pump is activated automatically to refill the tank. When the tank is filled to its maximum capacity, the pump is automatically de-energized.... Continue Reading

Abstract A wireless signal jammer is a device which blocks transmission by creating interference. This wireless signal jammer can be categorized into the Radio Frequency (RF) jammer and GSM jammer. A Radio Frequency jammer is a device used to disrupt or prevent communication via a broadcasted RF signal. It is an RF and GSM frequency disrupter... Continue Reading

ABSTRACT As the name of the project implies “Power Inverter”, is an electronics system that converts DC Energy (voltage) to an AC energy.  The major aim of this project is to design and construct a 1000VA Power inverter that is capable of powering loads of equivalent ratings, in the absence of power supply from NEPA or Generator. The system... Continue Reading

ABSTRACT This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device / item serves as a substitute for NEPA which almost monopolises the power supply to... Continue Reading

ABSTRACT Microcontroller has actually revolutionized the world economy as virtually every facet of life is benefiting in one way or the other on the great impact of  Microcontroller  today.Meanwhile,the technology of Microcontroller has gone long way of which monitoring and interfacing of real world devices to Microcontroller systems can not be... Continue Reading

ABSTRACT  The project is based on Construction of microcontroller vehicle speed alarm system which automatically warns the driver by activating a panic alarm which is triggered on when the driver exceeds the speed limit set in the system which also stops the alarm when the speed is reduced below the set speed limit. A speedometer system is used... Continue Reading

Abstract Travelers without prior information about the bus they are waiting, often waste time at bus stations which affects their day activity plan. GPS receivers are used to address this problem by providing real-time about the location of the bus, however, it is quite expensive and power consuming to use and every bus needs to have a GSM/GPRS... Continue Reading

Content   Pages   DECLARATION ii ACKNOWLEDGEMENT iii DEDICATION iv TABLE OF CONTENT v CHAPTER ONE Introduction 1 1.1 Background of the Study 1 1.2 Problem of Study 2 1.3 Objectives of Study 3 1.4 Scope of Study 3 1.5 Significance 4 CHAPTER TWO Literature Review 5 2.1 Introduction 5 2.2 Types of Street Lights 6 2.3 Photovoltaic Effect/Process 9... Continue Reading

ABSTRACT This system “” comprises of many modules which are: The Sensor/Input Unit, Microcontroller Unit and the Output Interface. The sensor detects when the hand approaches the nozzle. Once the approaching hand is detected, the hand dryer produces a very hot to dry the hand as well as... Continue Reading

The scope of the project covers aspects like the features of automatic three phase selector, its applications, and its operations. Its advantages and its components. Finally, it covers the importance on the need of automatic three phase selector and contributions toward a greater sharing load balance and a better three phase power distribution and... Continue Reading

ABSTRACT Power interruption and failure does not promote development. Investors and private organization do not feel secure to establish a business in a country with constant or frequent power failure. Power interruption limits the development of industries, commerce, businesses and seriously effects the economic development of any nation. There... Continue Reading

ABSTRACT  This report contains five chapters, in chapter one, as an introductory part of this project report, contained in chapter, we first define what accident is, the background of the study, that is to say, how the problem started or what prompted us to carry out the project. The problem statement, this is about the challenges we are solving,... Continue Reading

 ABSTRACT  The problem of epileptic power supply and its consequences in the developing countries is a generally known issue. Worst still, the hope that it will be addressed with the deregulation of electricity Industries in recent time are being dashed by flight to top class investors due to its poor implementation. There is a need to provide... Continue Reading