+234 813 0686 500
+234 809 3423 853
info@grossarchive.com
+234 813 0686 500
info@grossarchive.com

DESIGN AND IMPLEMENTATION OF A COMPUTER BASED CARTOGRAPHIC SYSTEM (CASE STUDY NPC ENUGU)

  • Type: Project
  • Department: Computer Science
  • Project ID: CPU0167
  • Price: ₦3,000 ($20)
  • Chapters: 7 Chapters
  • Pages: 40 Pages
  • Methodology: Scientific Method
  • Reference: YES
  • Format: Microsoft Word
  • Views: 1.5K

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
DESIGN AND IMPLEMENTATION OF A COMPUTER BASED CARTOGRAPHIC SYSTEM
(CASE STUDY NPC ENUGU)
ABSTRACT

This project carries out a study need for the design and implementation of a computer based cartographic system using National population commission as case study.
The researcher attempt to find out an improved method of cartographic drawing and how to automate the process (computerization).
Hindrances encountered in the mammal process that is, old approach of using and papers in drawing maps which could lead to poor representation of graphs, maps, hence the need for a well design and implemented computer based cartographic system arises.
This project computer based cartographic system will also help to keep record of many areas and maps of this country.
TABLE OF CONTENT
CHAPTER ONE
BACKGROUND OF THE STUDY
1.1              Introduction
1.2              Statement of the problem
1.3              Purpose of the study
1.4              Objectives of the study
1.5              Scope of the study
1.6              Limitation
1.7              Assumption
1.8              Definition of terms
CHAPTER TWO
LITERATURE REVIEW
CHAPTER THREE
OVERVIEW OF THE EXISTING SYSTEM
3.1              Analysis of the existing system
3.2              Method of data collection
3.2.1        Interview
3.2.2        Reference to written document
3.3              Input process and output analysis
3.3.1        Input analysis
3.3.2        Process analysis
3.3.3        Output analysis
3.4              Information flow diagram
3.5              Organisational chart
3.6              Problem of the existing system
3.1              Justification for the system
CHAPTER FOUR
DESIGN OF THE NEW SYSTEM
4.1              Output specification and design
4.2              Input specification and design
4.3              File design
4.4              Procedure chart
4.5              System flowchart
4.6              System requirement
CHAPTER FIVE
IMPLEMENTATION
5.1              Program design
5.2              Program flow chart
5.3              Pseudocodes
5.4              Program source listing
5.5              Test run
CHAPTER SIX
DOCUMENTATION
6.1              System / program documentation
6.2              User guide documentation
CHAPTER SEVEN
CONCLUSION AND RECOMMENDATION
7.1              Conclusion  
7.2              Recommendation
 CHAPTER ONE
BACKGROUND OF THY STUDY
1.1       INTRODUCTION
            Cartography is study and paractice of making maps or globes.  Maps have traditionally been made using pen and paper, but the advent and spread of computers has revolutionized cartography.
            Most commercial qualities maps are now made with map making software that falls into one of the three main types, CAD, GIS AND specialized map illustration software.
            Maps functions as visualization tolls for spatial data.  Spatial data is acquired from measurement and can be stored in a database from which it can be extracted from a variety of purposes.  Current trends in this field are moving away from analog methods of map making and towards the creation of increasingly dynamic, interactive maps that can be manipulated digitally.
            The cartographic process rest on the premise that the world is measurable and that we can make reliable representations or models of that reality.  Map making involve advanced skills and attitudes, particularly the use of symbols to represent certain geographic phenomens, as well as the ability to visualize the world.  In an abstract and scaled down form.
1.2       STATEMENT OF THE PROBLEM
            The present system of cartographic system of Nigerian population commission has a lot of problems, which are mentioned below.
ACCURACY
            In term of accuracy, the system is relatively slow and since it is dependent to human effort, so inevitable, it is also prone to human errors and omission.
TIME
            Going by the present system of operaion, time is consumed in the handling of operation; since most cartographic drawings are manilly operated with pen and papers.  It takes time to execute a particular work.
1.3       PURPOSE OF THE STUDY
            The objectives of the study is designed to help the Nigeria population commission in their cartographic and maps designing and rpresentation.
1.4       OBJECTIVES OF THE STUDY
            The objectives of the study are as follows
1.                  To provide better efficient job presentation for various designing in the commission.
2.                  To produce a system where information and output report will be produced much faster, more accurately and more detailed to the commission.
3.                  To keep records that are compact, integrated and updated.
 1.5       SCOPE OF THE STUDY.
            This study is strinced at finding out how effectively the computerization of the commission cartographic system will improve the operation of the commission.  However, the project is narrowed to planning department that is responsible for map presentation and enumeration demarcation.
1.7       ASSUMPTION
            Due to insufficient information, I assumed the following;
(a)                The staff of the particular department should be computer literate.
(b)               There should be enough tools and equipment for the operations.
1.8       DEFINITION OF TERMS
            Computer:-      A computer system is an electronic device with certain physical and logical attributes which enables it to accept input, process input and brings out output.
PROGRAMMING:    Programming is a term used to refer to the act of formulating algorithms and data structure which can be executed by some computers, to perhaps yield the required solution to a given problem.
FLOW CHART:         A flow chart represents a systematic way of carrying out a process and is of use when writing a computer program.
 
DESIGN AND IMPLEMENTATION OF A COMPUTER BASED CARTOGRAPHIC SYSTEM (CASE STUDY NPC ENUGU)
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Computer Science
  • Project ID: CPU0167
  • Price: ₦3,000 ($20)
  • Chapters: 7 Chapters
  • Pages: 40 Pages
  • Methodology: Scientific Method
  • Reference: YES
  • Format: Microsoft Word
  • Views: 1.5K
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 3,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0003 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Computer Science
    Project ID CPU0167
    Price ₦3,000 ($20)
    Chapters 7 Chapters
    No of Pages 40 Pages
    Methodology Scientific Method
    Reference YES
    Format Microsoft Word

    Related Works

    ABSTRACT This project carries out a study need for the design and implementation of a computer based cartographic system using National population commission as case study. The researcher attempt to find out an improved method of cartographic drawing and how to automate the process (computerization). Hindrances encountered in the mammal process... Continue Reading
    DESIGN AND IMPLEMENTATION OF A COMPUTER BASED CARTOGRAPHIC SYSTEM (CASE STUDY NPC ENUGU) ABSTRACT This project carries out a study need for the design and implementation of a computer based cartographic system using National population commission as case study. The researcher attempt to find out an improved method of cartographic drawing and how... Continue Reading
    ABSTRACT Current GPUs have many times the memory bandwidth and computing power compared to CPUs. The difference in performance is getting bigger as the evolution speed of the GPUs is higher than of the CPUs. This make it interesting to use the GPU for general purpose computing (GPGPU). I begin by looking at the architecture of the GPU, and some... Continue Reading
    ABSTRACT In software engineering, performance testing is testing that is performed, to determine how fast some aspect of a system performs under a particular workload. It can also serve to validate and verify other quality attributes of the system, such as scalability, reliability and resource usage. Performance testing is a subset of Performance... Continue Reading
    ABSTRACT The difficulties students record office usually face in any higher institution, made us to realize that computer assisted record system is the best in processing students record in IMT ENUGU, Enugu. This will save our school the embarrassment caused by students complaints at the end of working day. Our basic objective of designing and... Continue Reading
    ABSTRACT A network analysis is an instrument that measures the network parameters of electrical networks. Today, network analysis commonly measure s–parameters because reflection and transmission of electrical networks are easy to measure at high frequencies, but there are other network parameter sets such as y-parameters, z-parameters, and... Continue Reading
    ABSTRACT This project will address the problem of using a manual process in posting of graduating students of institutions of Higher learning to service. The manual processes involved in the posting were examined and analyzed. The problems were noted and possible solutions to these problems was recommended. A new computerized and more... Continue Reading
    ABSTRACT Network Security is essential to any organization. This has been previously done by manual method. But this project is aimed at computerized Network Security to make the work easier. This is possible because of the advance improvement in information technology as pertaining programming language; because this is achieved by the help of... Continue Reading
    ABSTRACT The objective of this project work was the design and implementation of a computerized judicial system. The need arose due to the rigorous work involves in the judicial process and finally the end judgment. in this project work system design used pure module approach and normalized data structure that face litates easy usage and... Continue Reading
    ABSTRACT The objective of this project work was the design and implementation of a computerized judicial system. The need arose due to the rigorous work involves in the judicial process and finally the end judgment. in this project work system... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us