DESIGN AND IMPLEMENTATION OF A COMMAND DRIVEN INTERFACE PROGRAM FOR NUMER BASE CONVENSION USING VISUAL BASIC

  • Type: Project
  • Department: Computer Science
  • Project ID: CPU0063
  • Access Fee: ₦5,000 ($14)
  • Chapters: 7 Chapters
  • Pages: 71 Pages
  • Methodology: NIL
  • Reference: YES
  • Format: Microsoft Word
  • Views: 1.9K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
DESIGN AND IMPLEMENTATION OF A COMMAND DRIVEN INTERFACE PROGRAM FOR NUMER BASE CONVENSION USING VISUAL BASIC
ABSTRACT

This project work is carried out to identify and discuss the need for the use of a command in number base conversion which is known or called command driven interface program; also the deals of all models of different type of number base conversion.
The advent of the computer has extended businesses and organization the capabilities for its achievement in our today livings.  Just as we are about to see in these book with respect to its effectiveness and accuracy in number base conversion using a command driven interface.
The manual way of converting a number from one base to another appears to be so difficult for our days students especially when dealing with a large number, but these study is set aside to enhance efficiency and mark the work easier for our student.
  THE ORGANISATION OF WORK
These study is being organize into six chapters.
Chapter one deals with the introduction of the proposed study.  Under this chapter, problem of study is introduced, the purpose of the study, aims and objectives also the scope or delimitation of study, assumptions including the terms of used definition.
For chapter two, it reviews the literature reviews related to the research’s area of study.  Chapter three, deals with the description and analysis of existing system.  These chapter starts with the facts finding, method used also the objective of the existing system. The problems of existing system and justification for new system.
Chapter four highlights the designs of the new system.  This chapter comprises of output specification and design, the input specification and design.  File design, the procedure chart, system flow chart and system requirement.
Chapter five is talking about implementation, the program design, the program flow chart and pseudo codes.  It is also make up of the source program and test run.  Chapter six talked about the documentation, the chapter seven concludes the study.  It contains the recommendations and conclusions.  Thee chapter is broken into the following subheading, recommendation and conclusion and references.
  TABLE OF CONTENTS
 CHAPTER ONE
INTRODUCTION
STATEMENT OF THE PROBLEM
PURPOSE OF THE STUDY
SCOPE OF THE STUDY
LIMITATION
ASSUMPTION
DEFINITION OF TERMS
 CHAPTER TWO
DESCRIPTION AND ANALYSIS OF THE EXISTING SYSTEM
FACT FINDING METHOD USED
AIMS OF THE EXISTING SYSTEM
INPUT, PROCESS, OUT ANALYSIS
PROBLEMS OF THE EXISTING SYSTEM
JUSTIFICATION FOR EXISTING SYSTEM
 CHAPTER FOUR
DESIGN OF THE NEW SYSTEM
OUTPUT SPECIFICATION AND DESIGN
INPUT SPECIFICATION AND DESIGN
FILE DESIGN
PROCEDURE CHART
SYSTEM FLOW CHART
SYSTEM REQUIREMENTS
 CHAPTER FIVE
IMPLEMENTATION
PROGRAM DESIGN
POGRAM FLOW CHART
PSEUDO CODES
OURCE PROGRAM
TEST RUN
 CHAPTER SIX
DOCUMENTATION
 CHAPTER SEVEN
RECOMMENDATION AND CONCLUSION
RECOMMENDATION
CONCLUSION
  CHAPTER ONE
 1.0       INTRODUCTION
Computer And Computer Programs happened to become more and more of an essential part of our every day lives. This is because computers are everywhere, whirring and whizzing their electronic ways into cars, homes, offices, schools and business activities.
When this machine was first developed, the only people who could operate them were highly trained engineers and scientist to unscramble the genetic code, but these days almost everybody operates computers as a part of daily life activities. Of course many people may not necessary think about the fact that are operating computer as they make adjustment to their digital watches. This tells us that it is important to make computer as easy to make use as possible since so many people now happen to operate this machine that its use seem limitless.
Numbers are usually assign symbols by which ideas they represent are coded and the numbers of digits used to code number in any base is equal to the base, but the conversion of numbers from one base to another appear to be difficult with respect to time wasted in trying to calculate especially when dealing with large numbers, that makes its so boring by the time your thinking ability is involved.
The advent and the introduction of computer machine has brought an aid to help surmount these problems with the use of a given command.
A computer operator can not just start operating on a computer without having a little ideas of what he/she wants to carry out on the computer before a computer should carry out any structure given, you must apply a command before that task can be executed on.
It takes just a brief introduction of a command for a new user to become familiar with these computer, since it constitutes of a language in which the use user in communicates with the computer.
The interactions between the computer and the user is what we called a computer interface the term computer interface is meant to cover all aspect of these interaction not just the hardware.  The primary purpose of the computer interface is to enable full communication between the user and the computer system.
 1.1    STATEMENT OF THE PROBLEMS
          Some given problems we have to know about in the aspect of a command driven interface are listed below:
1.           Can a given problem be programmed to convert number fro one base to another with the use of a command driven interface?
2.           can the introduction of the command driver interface in the aspect of number base conversion eliminate
 1.2       THE PURPOSE OF THE STUDY
The study happens to be very important since its purpose and objectives of carrying research on these study and analysis are to:
i.        to design and develop a system that will be more effective in carrying out the operation of base conversion primarily.
ii.       to ascertain whether the existing system is adequate.
iii.          It will also highlight inadequacies, if any and determine ways through which application packages can minimize or eliminate the established problem.
 1.3       SCOPE OF THE STUDY
Since different conversions exist in curriculum and test this study concentrates on command driven interface with respect to number base conversion.
The study is restricted to number base ten, base five, base six, base seven, base eight, base nine and base sixteen also a reserve conversion back to base ten.
 
DESIGN AND IMPLEMENTATION OF A COMMAND DRIVEN INTERFACE PROGRAM FOR NUMER BASE CONVENSION USING VISUAL BASIC
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Computer Science
  • Project ID: CPU0063
  • Access Fee: ₦5,000 ($14)
  • Chapters: 7 Chapters
  • Pages: 71 Pages
  • Methodology: NIL
  • Reference: YES
  • Format: Microsoft Word
  • Views: 1.9K
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Computer Science
    Project ID CPU0063
    Fee ₦5,000 ($14)
    Chapters 7 Chapters
    No of Pages 71 Pages
    Methodology NIL
    Reference YES
    Format Microsoft Word

    Related Works

    ABSTRACT The end-of-course grades assigned by lecturers are intended to convey the level of achievement of each student in the class. These grades are used to make a multitude of decisions. Unless a sufficiently, accurate and efficient method is used for the grading, the grades are applied to convey misinformation and lead the decision- maker... Continue Reading
    ABSTRACT The end-of-course grades assigned by lecturers are intended to convey the level of  achievement of each student in the class. These grades are used to make a multitude  of decisions. Unless a sufficiently, accurate and efficient method is used for the  grading, the grades are applied to convey misinformation and lead the decision-... Continue Reading
    ABSTRACT This project was aimed at designing a Video Library Management Information System; a system to aid in the management and operation of the video library. Methods that were used to gather information about the current system include; interviews, document review and questionnaires. From that information, requirements for the new system were... Continue Reading
    ABSTRACT This Uganda Taxi Operators and Drivers Association (UTODA) database is developed to show the efficiency of the company to the employees or staff. It's again developed with an aim of enhancing its activities such as file management. The database is involved in access of vital information about the company. Compilation of views from users... Continue Reading
    ABSTRACT An Inventory Control System defines a series of processes and actions involved in capturing raw data, processing data into useable information and disseminating information to use in the needed form. The system is a general purpose set of instruction that facilitates the process of defining, construction, controlling and manipulation of... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1      INSIGHT TO ONLINE MARKETPLACE Online Market, commonly known as e-commerce or eCommerce, or e-business consists of the buying and selling of products or services over electronic systems such as the Internet and other computer networks. The amount of trade conducted electronically has grown extraordinarily... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY Traditionally, high control in home and office environments takes place through switches (on/off), deals and sliders (dimmers) and sometimes motion sensors. These controls can be incorporated in the built environment such as walls, or attached to lights that people place themselves (desk lamps,... Continue Reading
    (A Case Study Of Daughters Of Divine Love Juniorate) ABSTRACT Student achievement is profoundly influenced by the evaluation practice used by teachers in the classroom. Research in education has consistently shown achievement monitoring and feedback to be extremely important factors in the... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF STUDY Virtually all software used in enterprises today has the same goal which is supporting business processes. Some processes are entirely automated, relying solely on communication among applications, others probably rely on people to initiate the process, approve documents the process uses and resolve... Continue Reading
    CHAPTER ONE 1.0        INTRODUCTION In the past, security was simply a matter of locking the door or storing files in a locked filing cabinet or safe. Today, paper is no longer the only medium of choice for housing information. Files are stored in computer databases as well as file... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us