+234 813 0686 500
+234 809 3423 853
info@grossarchive.com
+234 813 0686 500
info@grossarchive.com

Project Topic: DESIGN AND SIMULATION OF AN ELECTRIC DEVICE WITH AUDIO UNIT.

  • Type: Project
  • Department: Computer Science
  • Project ID: CPU1138
  • Price: ₦3,000 ($20)
  • Pages: 57 Pages
  • Format: Microsoft Word
  • Views: 394

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT

This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number.
The device works with principle of chance employed by ludo game players. The output of the display is usually very rapid that the player does not actually see the number when the device is switched ON so that it will purely be a game of chance. When the off key is pressed, a particular number is displayed and this number is the number the player got.
The operation of the device starts by the generation of a pulse frequency. The pulse frequency (square wave signal) is generated by times (555 timer) by connecting in unstable multi-vibrator. The output from the timer is used in clocking the binary counter (mode 10 counter) but this counter is biased in the mode 10 counter, the output from Qo, Q1 and Q2 were connected to the reset pins so that once the counter finishes the count of six of goes back to zero.
The result from the binary counter is then fed to the decoder / driver before connecting it to seven segment so that the decoder will be able to convert the binary values to the decimal values that are being used in the ludo game dice. The seven segment then displays the numbers by lightening the diodes that make up that particular.
This device is being regulated by a latch (4-edge triggered flip-flop which has two switches, one is used for putting the power supply and the other two push switches for the working of the dice display.
 
ORGANISATION OF WORK
The organisation of this work is in seven chapters, the first on the introduction; the second is on the literature review; the third is on the design of the system; the fourth deals with the construction (implementation); sixth is on packaging and the seventh on the recommendation and conclusion.

The first chapter: Introduction gives general view of what the electronic dice displays (EDD) with audio unit aims and objectives, scope, limitations, problems and purpose of the study.

The Second Chapter: Literature Review explains the different components that make up the system, their make up and how they operate.

The third deals on the design of the system, describes vividly each component of the system, their operating modes, specifications and applications, schematic diagram of the system showing independence modules which function together to make up the system.

Construction, the fourth chapter deals with the actual construction of the system, the design requirement, theory of the functioning of each module system, breakdown of the module specification and construction. Calculations and careful selection of the component values of each modules are detailed in this chapter.

The fifth chapter which is on the documentation deals on the general description of the work, provides ease of maintenance and wage of the system.

Packaging, the sixth chapter lists the factors that were taken into consideration in the design and construction of the package.

The seventh and the last chapter, recommendations and conclusion gives a general view of what is covered and the importance of this device. It also suggested certain areas for further studies.
 
LIST OF TABLES
Table 3.1 Trueth table for sk flip flop
Table 3.2 Delay flip flop from SR flip flop
Table 3.4 AND logic gate truth table
Table 3.5 Table of counter output in various forms.
Table 3.7 BCD to seven segment decoder truth table.
Table 4.1a BCD count sequence 
Table 5.0 Procedure Chart
Table 5.1 System Flowchart
Table 6.0 Program Design
Table 6.1 Program Flowchart
 
TABLE OF CONTENTS
Cover page
Title page
Approval page
Dedication 
Acknowledgement 
Abstract
Organization of work
List of figures 
List of table

CHAPTER ONE
INTRODUCTION
1.0 Statement of problem
1.1 Purpose of study
1.2 Aim and objectives
1.3 Scope of the study
1.4 Limitations of the study
1.5 Definitions of terms.

CHAPTER TWO
LITERATURE REVIEW

CHAPTER THREE
DESCRIPTION AND ANALYSIS OF THE EXISTING SYSTEM FACT FINDING METHODS
Organization structure
Objectives of the existing system

CHAPTER FOUR

DESIGN OF THE NEW SYSTEM
Output specification and design
Input specification and design
File design.
Procedure chart
System flow chart
System Requirement.

CHAPTER FIVE
IMPLEMENTATION
Program Design
Program Flowchart
Pseudcodes

CHAPTER SIX
DOCUMENTATION

CHAPTER SEVEN 
RECOMMENDATION
CONCLUSION

REFERENCES

DESIGN AND SIMULATION OF AN ELECTRIC DEVICE WITH AUDIO UNIT.
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Computer Science
  • Project ID: CPU1138
  • Price: ₦3,000 ($20)
  • Pages: 57 Pages
  • Format: Microsoft Word
  • Views: 394
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 3,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0003 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Computer Science
    Project ID CPU1138
    Price ₦3,000 ($20)
    No of Pages 57 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number. The device works with principle of chance employed by ludo game players. The output of the display is usually very... Continue Reading
    This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number. The device works with principle of chance employed by ludo game players. The output of the display is usually very rapid that... Continue Reading
    ABSTRACT This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number. The device works with principle of chance... Continue Reading
    ABSTRACT This work deals extensively with the design and construction of an electronic dice display (EOD) with audio unit. The device displays the of a hudo dice in numberical form and also produces sound as it displays the number. The device works with principle of chance... Continue Reading
    . ABSTRACT This work deals extensively with the design and construction of an electronic dice display (EOD) with audio unit. The device displays the of a hudo dice in numberical form and also produces sound as it displays the number. The device works with principle of chance... Continue Reading
    ABSTRACT Electronic circuit simulation uses mathematical models to replicate the behavior of an actual electronic device or circuit. Simulation software allows for modeling of circuit operation and is an invaluable analysis tool. Due to its highly accurate modeling capability, many Colleges and Universities use this type of software for the... Continue Reading
    ABSTRACT Sending e-cards via email is becoming increasingly common. Here we create a WAP-enabled greeting card system called WAP Reetings, which allows WAP-enabled device users to send greeting cards to other WAP users. Wireless Application Protocol (WAP) is a technical standard for accessing information over a mobile wireless network. A WAP... Continue Reading
    ABSTRACT Hearing aid device is a small electronic gadget that is fit in or behind the ear to improve one’s hearing and consequently communication ability.This research work involves the design and development of a hearing aid device withpre-amplifier; an acoustic signal picked-up using a condenser microphone. TDA 2822M IC is configured to... Continue Reading
    ABSTRACT This project deals on the design and implementation of Radio frequency RF based wireless batch counting device for brewery capable of counting the bottled drinks /product in a conveyor and displays the value numerically and wireless to it receiver installed about... Continue Reading
    ABSTARCT Text-to-speech and related read audio tools are being widely implemented in an attempt to assist students’ reading comprehension skills. PDF to audio system is a screen reader application designed and constructed for effective audio communication system. PDF’swere designed to present... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us