ARDUINO BASED OBSTACLE AVOIDANCE ROBOT CAR

  • Type: Project
  • Department: Computer Engineering
  • Project ID: CPE0032
  • Access Fee: ₦5,000 ($14)
  • Pages: 58 Pages
  • Format: Microsoft Word
  • Views: 1.1K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT

This project involves the design and implementation of an intelligent obstacle-avoiding robot car. The

objective of this project is to implement a robot car, which while moving should have the ability to

detect obstacles in its path and change direction where obstacles are present without any form of

external influence. The new direction to be taken to avoid collision is the direction that has the most

distance between the obstacle and the sensor and this is determined by the robot based on sensor

inputs.

This implementation was done using an ultrasonic wave sensor, which measures distance by sending

pulses. Also, the movement of the servo motor (for sensor movement) and the DC motors (for wheel

movement) are controlled by the motor driver shield in order to enable the obstacle avoidance

function. The commands are sent to the Arduino microcontroller chip which serves as the main control

of the robot car, as it controls the sensor and car movement.

The implemented robot car was able to successfully detect and avoid obstacles within the line of sight

of the Ultrasonic sensor used.

 

vi

Contents

DECLARATION ....................................................................................................................................................... i

CERTIFICATION .................................................................................................................................................... ii

DEDICATION ....................................................................................................................................................... iii

ACKNOWLEDGEMENT ........................................................................................................................................ iv

ABSTRACT ............................................................................................................................................................ v

Chapter 1: Introduction .......................................................................................................................................1

1.1 Background ..........................................................................................................................................1

1.2 Research Problem ...............................................................................................................................1

1.3 Motivation ...........................................................................................................................................2

1.4 Aim and Objectives ..............................................................................................................................2

Chapter 2: Literature review ...............................................................................................................................3

2.1 Artificial Intelligence ............................................................................................................................3

2.2 Robotics and Robots ............................................................................................................................3

2.3 Robot Learning ....................................................................................................................................4

2.4 Autonomous Robot .............................................................................................................................4

2.5 Arduino ................................................................................................................................................5

2.5.1 Overview.............................................................................................................................................5

2.5.2 Features ..............................................................................................................................................6

2.5.3 Advantages .........................................................................................................................................7

2.5.4 Arduino Board Types ..........................................................................................................................7

Chapter 3: Materials and Analysis Techniques ...................................................................................................9

3.1 Materials ..............................................................................................................................................9

3.2 Analysis ................................................................................................................................................9

3.2.1 HC-SR04 Ultrasonic Sensor ..........................................................................................................9

3.2.2 SG-90 Servo Motor ................................................................................................................... 13

3.2.3 Arduino UNO R3 ....................................................................................................................... 15

3.2.4 DC Motor .................................................................................................................................. 17

3.2.5 L293D Motor Driver Shield ....................................................................................................... 19

3.3 Methodology .................................................................................................................................... 20

3.3.1 Robot Construction ......................................................................................................................... 20

3.3.2 Programming the Robot .................................................................................................................. 24 

vii

Chapter 4: Results and Discussion .................................................................................................................... 33

4.1 Results .............................................................................................................................................. 33

4.2 Discussion ............................................................................................................................................... 34

5 Conclusion, Recommendation and Issues for Future Work ..................................................................... 35

5.1 Conclusion ........................................................................................................................................ 35

5.2 Recommendation ............................................................................................................................. 35

5.3 Issues ................................................................................................................................................ 35

References ........................................................................................................................................................ 37

Appendix........................................................................................................................................................... 39 

ARDUINO BASED OBSTACLE AVOIDANCE ROBOT CAR
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Computer Engineering
  • Project ID: CPE0032
  • Access Fee: ₦5,000 ($14)
  • Pages: 58 Pages
  • Format: Microsoft Word
  • Views: 1.1K
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Computer Engineering
    Project ID CPE0032
    Fee ₦5,000 ($14)
    No of Pages 58 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT This article presents a microcomputer-based robot dynamic sensing system by the use of the linear scanning approach for object recognition and manipulation. In this research, a 512 × 1 solid-state photodiode linear array sensor is used for dynamic scanning the object to be identified. An experimental prototype is built, which consists of... Continue Reading
    ABSTRACT This article presents a microcomputer-based robot dynamic sensing system by the use of the linear scanning approach for object recognition and manipulation. In this research, a 512 × 1 solid-state photodiode linear array sensor is used for dynamic scanning the object to be identified. An experimental prototype is built, which consists of... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF STUDY The continuous increase in food demand requires a rapid improvement in food production technologies. Food insecurity is a major challenge in developing countries. In a country like Nigeria where the economy is mainly not agriculture based, use of technology to improve on yields is paramount.... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1            BACKGROUND OF STUDY The continuous increase in food demand requires a rapid improvement in food production technologies. Food insecurity is a major challenge in developing countries. In a country like Nigeria where the economy is mainly not agriculture based, use of technology to improve on yields... Continue Reading
     ABSTRACT  The problem of epileptic power supply and its consequences in the developing countries is a generally known issue. Worst still, the hope that it will be addressed with the deregulation of electricity Industries in recent time are being dashed by flight to top class investors due to its poor implementation. There is a need to provide... Continue Reading
    ABSTRACT Nowadays, most of the conventional home automation systems are designed for special purposes but this system proposes an all-in-one general purpose home automation system that can be easily be implemented in new and existing homes. 'The aim is to develop a reliable, compact, fast and low cost smart home automation system, based on... Continue Reading
    ABSTRACT Environmental Justice is the fair treatment and meaningful involvement of all people regardless of race, colour, sex, national origin or income with respect to the development, implementation and enforcement of environmental laws, regulations and policies. Environmental... Continue Reading
    Abstract  The research work aimed among others at determining the relationship between internal measures to proper accounting records. A survey research design was adopted for this research study and a sample size was selected using sampling technique as data used were... Continue Reading
    ABSTRACT This project work is focused on the design and construction of obstacle detection system for the visually impaired. This paper reports on a study that helps visually-impaired people to walk more confidently. The study hypothesizes that a smart walking stick that alerts visually-impaired people over obstacles in front could help them... Continue Reading
    ABSTRACT Policy making and Implementation is one issue that cannot be over emphasized because of the important role it plays I the life of any organization wishing to survive and to grow in the face of changing world. Based on the need for organizations to achieve their objectives, the researcher decided to conduct research study on the obstacles... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us