SYNTHESIZING OF COPPER NANO PARTICLE

  • Type: Project
  • Department: Chemistry
  • Project ID: CHM0117
  • Access Fee: ₦5,000 ($14)
  • Pages: 8 Pages
  • Format: Microsoft Word
  • Views: 671
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Abstract

Development of improved methods for the synthesis of copper nanoparticles is of high priority for the advancement of material science and technology. Herein, starch-protected zero-valent copper (Cu) nanoparticles have been successfully synthesized by a novel facile route. The method is based on the chemical reduction in aqueous copper salt using ascorbic acid as reducing agent at low temperature (80 °C). X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray spectroscopy measurements were taken to investigate the size, structure and composition of synthesized Cu nanocrystals, respectively. Average crystallite size of Cu nanocrystals calculated from the major diffraction peaks using the Scherrer formula is about 28.73 nm. It is expected that the outcomes of the study take us a step closer toward designing rational strategies for the synthesis of nascent Cu nanoparticles without inert gas protection.


SYNTHESIZING OF COPPER NANO PARTICLE
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Chemistry
  • Project ID: CHM0117
  • Access Fee: ₦5,000 ($14)
  • Pages: 8 Pages
  • Format: Microsoft Word
  • Views: 671
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

Details

Type Project
Department Chemistry
Project ID CHM0117
Fee ₦5,000 ($14)
No of Pages 8 Pages
Format Microsoft Word

Related Works

ABSTRACT    The  effects  of  particle  size  and  particle  size  distributions  of  three clay samples, on their modulus of rupture were studied. The three clay samples were collected from natural clay deposits  at  Nsu;  Ohiya-  Umuahia;  and  Awo-Omamma  all  in south  eastern  Nigeria.  The  particle  size ... Continue Reading
TABLE Of CONTENTS Declaration .1 Acknowledgements .2 Table of contents 3 List of acronyms 6 Abstract 7 CHAPTER ONE INTRODUCTION 1.0 Overview 9 1,1 Background 1.2 Problem statement 12 1.3 Aim and Objectives 12 1.3,1 Specific Objectives 13 1.4 Justification of the study 13 1.5 Scope of the study 14 CHAPTER TWO: LITERATURE REVIEW 2.0 Introduction 16... Continue Reading
Abstract Nowadays, ZnO is considered as the most important chemical compounds due their distinctive properties owing to its wide band gab and large exciton binding energy. It is well known that the structural and the optical properties of ZnO differ by different methods of preparation. Therefore, in this work, ZnO power was prepared by two... Continue Reading
ABSTRACT This project was done to extract and characterize bean oil according to their particle sizes. The experiment was carried out using scent bean (i.e. ‘Ozaki’, ‘Ijilizi’or ‘Azamu’) as sample. The oils were extracted by solvent extraction /leaching extraction using n-hexane. Proximate analysis was carried out to obtain percentage... Continue Reading
ABSTRACT Energy is a basic necessity for the economic development of a nation. There are different forms of energy, but the most important form is the electrical energy. A modern and civilized society is so much dependent on the use of electrical energy. Activities relating to the generation, transmission and distribution of electrical energy have... Continue Reading
OPTICAL AND STRUCTURAL PROPERTIES OF COPPER ALUMINUM DISELENIDE (CuAlSe 2 ) COMPOUND THIN FILMS ABSTRACT A low cost chemical bath deposition technique has been used for the preparation of Copper aluminum diselenide (CuAlSe2) thin films onto commercial microscope glass substrates. The values of deposition parameters were varied such as... Continue Reading
Abstract: Thin films of Copper Nickel Selenide (CuNiSe) were synthesized on glass slides at room temperature using chemical bath deposition (CBD) method. The films were deposited from aqueous solution containing copper ion, nickel ion and potassium selenate (K 2 SeO 4 ) at varying molar concentration of nickel ion with constant time and pH of the... Continue Reading
ABSTRACT This project was done to extract and characterize bean oil according to their particle sizes. The experiment was carried out using scent bean (i.e. ‘Ozaki’, ‘Ijilizi’or ‘Azamu’) as sample. The oils were extracted by solvent extraction /leaching extraction using n-hexane. Proximate analysis was carried out to obtain percentage... Continue Reading
ABSTRACT Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading
ABSTRACT Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading
Call Us
whatsappWhatsApp Us