DETERMINATION OF HEAVY METALS IN SOME COSMETIC PRODUCTS COMMONLY USED AMONG STUDENTS OF KADUNA POLYTECHNIC

  • Type: Project
  • Department: Chemistry
  • Project ID: CHM0048
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 38 Pages
  • Methodology: Scientific
  • Reference: YES
  • Format: Microsoft Word
  • Views: 1.3K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT
The toxicity of heavy metals to humans as a result of long term exposure to pollutants consumer products such as cosmetics and other pollutants has been established. In this study, the levels of heavy metals in different cosmetic products commonly used among Kaduna Polytechnic students were assessed. The cosmetics were analyzed for heavy metals (chromium, copper, nickel and lead) using Atomic Absorption Spectrophotometer (AAS) after digestion with concentrated   HNO3 and HCl acids. The concentrations of the selected heavy metals were determined in duplicates. All the samples analyzed contain detectable amount of the selected heavy metals which range from 0.02813 – 13.6628ppm in Lipstick, 2.4162 – 81.7835ppm in Powder and 0.0019 – 39.2720ppm in Soap although within the allowed limits. It is confirmed from this study that the use of cosmetic product exposes the users to low concentrations of toxic heavy metals which may lead to potential health risk to such users, since the metals can accumulate in the body over time. Recommendations on how to curb this challenge was also given.

TABLE OF CONTENTS

CHAPTER ONE
1.0 Introduction 1
1.1 Heavy metals 3
1.2 Cosmetics 4
1.3 Hazardous chemicals in cosmetics 5
1.4 Aim and objectives 6
1.5 Justification 6
1.6 Scope 7

CHAPTER TWO
2.0 Literature review 8
2.1 Toxic heavy metals 10
2.1.1 Lead 10
2.1.2 Cadmium 12
2.1.3 Mercury 13
2.1.4 Arsenic 14
2.1.5 Nickel 16
2.1.6 Chromium 17
2.2 Exposure to heavy metals 18
2.3 How heavy metals get into cosmetics 20
2.4 Allowable levels of heavy metals in cosmetics 21
2.5 Health impacts of heavy metals in cosmetics 22
CHAPTER THREE
3.0 Materials and method 26
3.1 Materials 26
3.2 Methodology 27
3.2.1 Sample collection 27
3.2.2 Digestion of samples 27
3.2.3 Preparation of standard solution 27
3.2.4 Sample preparation 27

CHAPTER FOUR
4.0 Results 29

CHAPTER FIVE
5.0 Discussion, Conclusion and Recommendation
5.1 Discussion 31
5.2 Conclusion 32
5.3 Recommendation 32
References 33

DETERMINATION OF HEAVY METALS IN SOME COSMETIC PRODUCTS COMMONLY USED AMONG STUDENTS OF KADUNA POLYTECHNIC
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Chemistry
  • Project ID: CHM0048
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 38 Pages
  • Methodology: Scientific
  • Reference: YES
  • Format: Microsoft Word
  • Views: 1.3K
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Chemistry
    Project ID CHM0048
    Fee ₦5,000 ($14)
    Chapters 5 Chapters
    No of Pages 38 Pages
    Methodology Scientific
    Reference YES
    Format Microsoft Word

    Related Works

    ABSTRACT This research was conducted to determine the concentrations of heavy metals and proximate composition of different cereals (maize, millet and rice). Two different samples each sold in two different markets (Ogbete and Gariki) in Enugu, were used for this work, using atomic, absorption spectrophotometer. The heavy metal screening of the... Continue Reading
    ABSTRACT This research was conducted to determine the concentrations of heavy metals and proximate composition of different cereals (maize, millet and rice). Two different samples each sold in two different markets (Ogbete and Gariki) in Enugu, were used for this work, using atomic, absorption spectrophotometer. The heavy metal screening of the... Continue Reading
    Abstract  Water and fish samples were collected monthly from each of the four sampling Sites from August to September 2019 with the aid plastic bottles, hook and line and a gura trap from river Ngadda, Maiduguri, Borno state. A total of 16 fishes belonging to Clarias garipienus were sampled throughout the sampling periods. One fish from each... Continue Reading
    Abstract   Water and fish samples were collected monthly from each of the four sampling Sites from August to September 2019 with the aid plastic bottles, hook and line and a gura trap from river Ngadda, Maiduguri, Borno state. A total of 16 fishes belonging to Clarias garipienus were sampled throughout the sampling periods. One fish from each... Continue Reading
    ABSTRACT Industrialization and urbanization has increased tremendously in the last few years, especially in  underdeveloped countries, such as Kenya. This has resulted in rising demand for certain aesthetic  goods such as paints and coatings. Paint and coating industries use extensive raw materials in their  manufacturing processes that consist... Continue Reading
    ABSTRACT  The Cu, Pb, Zn and Mn content of ten chocolates and candies purchased from Abuja municipal aiea council were determined by Atomic Absorption Spectrometry (AAS). The HN03 digestion method was evaluated by the analysis of the ten replicates of the candies and chocolate which gave a precision of 2%, 3%, 17% and 2% for Cu, Mn, Ni and Zn... Continue Reading
    ABSTRACT  The concentration of heavy metals such as Pd, Cd, Cu and Cr were studied using AAS on vegetable samples such as Tomato (fruit and leaf) and Onion bulb. Trace element as Cu showed high concentration. The concentration of heavy metal like Cu ranged from of 0.155 to 0.024mg/kg in tomato fruit; 0.120 to 0.057mg/kg in leafy tomato; 0.118 to... Continue Reading
    ABSTRACT  The concentration of heavy metals such as Pd, Cd, Cu and Cr were studied using AAS on vegetable samples such as Tomato (fruit and leaf) and Onion bulb. Trace element as Cu showed high concentration. The concentration of heavy metal like Cu ranged from of 0.155 to 0.024mg/kg in tomato fruit; 0.120 to 0.057mg/kg in leafy tomato; 0.118 to... Continue Reading
    ABSTRACT Five different filling stations (Station A, Station B, Station C, Station D and Station E) were analyzed for Total Petroleum Hydrocarbons and heavy metals concentration using Gas chromatography–mass spectrometry and atomic absorption spectrophotometer respectively. The result of the analysis obtained indicated that the percentage range... Continue Reading
    TABLE OF CONTENTS DECLARATION ........................................................................................................................... i APPROVAL .................................................................................................................................. ii DEDICATION... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us