Most Read Chemical Engineering Project Topics and Materials (Page 19)

ABSTRACT The sets of seizes with shaker which was fabricated and assembled in the Chemical Engineering pilot plant was aimed at providing the students with a machine that will aid them in practical involving the separation of solid particles, besides, this, it was also fabricated sizes or diameter of the solid particles of a substances by allowed... Continue Reading

ABSTRACT This project “Characteristics Of Local Produced Oil From Groundnut Oil” was carried out using ten cups of groundnut seeds that was purchased from a local market in Enugu metropolis.  The oil these seeds were in Enugu using solvent extraction method.  Two different solvents were used in the extraction namely: Ethane and order to... Continue Reading

Environmental pollution as a result of drilling and mining activities in areas where deposits of petroleum and oil are found, proved a great threat to the wellness of the fauna and flora as well as to the humans.  TABLE OF CONTENTS  Background of study literature review Oil pollution act of 1990 Diesel Chemical composition  Volatility of Diesel... Continue Reading

ABSTRACT The aim of this project was to construct one office table and four chairs. In the course of this project the length of plank used was 12†and we used about 4 number (mahogany) of 1†thickness, ¾ plywood of 1 sheet of 1†thickness, as well as ¼†plywood of ½  and glue 1 tin wenner 1 rod, foam ½ sheet.  Fabrics... Continue Reading

ABSTRACT This research was carried out with the sole aim of monitoring interface in the transportation of petroleum pipeline products and the analysis of this product from Enugu depot.  In the research it was observed that product contaminates each other if interface was not properly monitored and cut at the appropriate time. The three major... Continue Reading

ABSTRACT Effect of temperature on viscosity and density changes on neem biodiesel and neem biodiesel-blend has been investigated.  Neem oil was sourced from neem (Azadirachta indica) seed, which was extracted using soxhlet apparatus and was converted to biodiesel using transterification method. The fuel properties of the resultant biodiesel such... Continue Reading

ABSTRACT This project was carried out using acid activated coal from Enugu coal and the production of ve4getablew oil was monitored using spectrophotometer to measure the absorbance. It was also perform to check the suitability of activated Enugu coal as a bleaching agent for palm oil. The Enugu coal samples were collected, size reduced,... Continue Reading

ABSTRACT  This project is an equipment which been fabricated for the principle purpose of producing heat energy for commercial use by burning solid fuel like briquette.  The project which is the fabrication of briquette stove was made from preferentially selected engineering materials like mild steels of different gauge member and metallic rod.... Continue Reading

ABSTRACT This research project was aimed at optimization of adsorption conditions for removal of methylene blue dye using conventionally activated hamburger seed shell.  The activated carbon was first prepared from the hamburger seed shell through carbonization at a temperature of 8000C for 2 hours followed by activation using conc. KOH 9m as... Continue Reading

ABSTRACT The objective of the repair and refurbishing the pilot plant temperature control equipment is to keep the apparatus in good working condition for it to be used for its various purposes. The part of the temperature control changed and new one installed. This was due to series of faults developed by the former one” Electrical accessories... Continue Reading

ABSTRACT The aim of the project is to construct a soap cutting device capable of size-remaining the soap produced into regular bars and tablets without error in shapes and sizes. Soap cutting devices are used to size reduce or cut the bulk of soap produced into bars and tablets.  Soap cutting devices facilitate the process of cutting the produced... Continue Reading

ABSTRACT   This study was carried out principally for the formulation of artist paint using available raw materials. Paint simplified is a material which may be applied to surfaces in relatively thin layers and which changes to a solid and may occur by evaporation of solvents, by chemical reaction or by combination of the two. Artist paint is the... Continue Reading

ABSTRACT A study on hydrogeochemistry and quality of shallow water and engineering properties of soil around the Adeta area in Ilorin was carried out based on data obtained from the field and laboratory. Groundwater flow, descriptive, and multivariant statistical analyses, piper, stiff and durov diagrams, as well water quality indices were used to... Continue Reading

ABSTRACT Pausinystalia yohmibe is a member of thefamilyRubiaceae. It is a valuable medicinal tree, distributed in evergreen closed canopy forests in West Africa.  It is traditionally used for treatment mostly on erectile dysfunction. This research was carried out to evaluate the immunomodulatory effect of ( Pausinystalia yohmibe) stem bark... Continue Reading

ABSTRACT The project Analysis of Enugu Coal was done to determine the characteristic properties of Enugu Coal with particular emphasis on the proximate and ultimate analysis. Coal samples from the Enugu Coal (Onyeama) mine were obtained and pulverized.  The coal sample (pulverized) was subjected to proximate and ultimate analysis to determine its... Continue Reading

ABSTRACT The table constructed has a horizontal top with vertical support or legs to raise it from the ground. The aim of the table constructed is for the preservation and storage of useful materials like books, files, computers, result booklets, electronics, office equipments and some vital home equipment etc. However, before the construction of... Continue Reading

ABSTRACT A table top liquid-liquid extraction unit was constructed.  The project also involved the repair and servicing of peristaltic suction pump, by painting it, replacing the connecting cord to the power supply, refilling of the work out suction plates, teeth and general servicing of the equipment.  The glass absorption columns were provided... Continue Reading

ABSTRACT The objective of the work is the catalytic conversion of waste plastics into fuel oil and solid wax using Ca(OH)2 and the design of pyrolysis reactor. Plastic wastes such as, polypropylene, low density polyethylene, high density polyethylene, polystyrene are the most frequently used in everyday activities and disposed of to the... Continue Reading

ABSTRACT After detailed study on machines and levers, the construction work started as follows:- Making out, pattern development, cutting filling, drilling, machining, assembling, welding and finishing.  Detailed procedures carried out is located at the sequence of operation in subsequent pages. The machine has scale of 1:5 in all parts of its... Continue Reading

ABSTRACT A common misconception about stainless steel is that it is not affected by corrosion. Although one of the main reasons why stainless steels are used is corrosion resistance, they do in fact suffer from certain types of corrosion in some environments and one of such types is crevice corrosion.  Crevice corrosion is normally a consequence... Continue Reading

ABSTRACT This research work show cases the potentials of Itakpe Iron concentrate for Magneto-rhelogical abilities. The concentrate was first ball milled to size reduce it then subjected to low magnetic strength from magnetic bits in-situ the magnetic fluid. It was determined that temperature affected the fluid inversely, as temperature increased... Continue Reading

ABSTRACT The project aims to develop a flow process to obtain the optimum temperature and time necessary for the maximum recovery of alkali present in palm inflorescence. On this ground, a preliminary experiment was performed.  During this process, both male and female palm inflorescence were compared for maximum alkali production and it was... Continue Reading

ABSTRACT  Industrial waste water treatment covers the mechanisms and process used to treat water that have been contaminated in some way by anthropogenic industrial or commercial activities prior to its release into the environment or its re-use. Water is a natural and inorganic solvent with the composition of hydrogen and oxygen only (H20).... Continue Reading

ABSTRACT The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the chosen mild steel are;... Continue Reading

Engine oils are made from crude oil and its derivatives by mixing of certain other chemicals (additives) for improving their certain properties. Lubricating oil is used to lubricate moving parts of engine, reducing friction, protecting against wear, removing contaminants from the engine, act as a cleaning agent, and act as an anti corrosion and... Continue Reading