DESIGN OF MELON DE-HUSKING AND SEPARATION MACHINE

  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0029
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 64 Pages
  • Methodology: scientific analysis
  • Reference: YES
  • Format: Microsoft Word
  • Views: 2.3K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
DESIGN OF MELON DE-HUSKING AND SEPARATION MACHINE
TABLES OF CONTENT

CHAPTER ONE
1.1              Introduction                                       
1.2              Description of the Design Melon                   
1.3              Principles of Operation                      
1.4              Advantages                                                    
1.5              Objectives                                          
1.6              Scope                                                                         
1.7              Beneficiaries                                                  
CHAPTER TWO
2.1              Review of Some Properties                           
2.2              Some Local Variety of Melon Used              
2.3              Manual De-Husking                                                   
2.4              Singular Method of Manual De-Husking                  
2.5              Manual Batch Method of De-Husking                                  
2.6              Mechanized Method of De-Husking             
2.7              Advantages                                                                            
2.8              Disadvantages                                                
2.9              Melon Treatment Before De-Husking                       
CHAPTER THREE
3.1              Mechanics of Operation of Melon De-Husking
3.2              Circular Motion and Centrifugal Force (FC)             
3.3              Rotational Torque (T)                                                
3.4              Work Done by a Torque                                
3.5              Force Analysis on Shaft                                             
3.6              Volume of Air Generated (VA)                                
CHAPTER FOUR
4.1              Design Calculations                                       
4.2              Optimal De-Husking Speed                           
4.3              Angular Velocity of Ratio of the Impeller (W)         
4.4              Centrifugal Force Developed (FC)                            
4.5              Torque Developed (T)                                    
4.6              Power Developed (P)                                     
4.7              Loads of Shaft of the Electric Motor                        
4.8              Friction and Particle Motion                                      
4.9              Determination of the Bearing Reaction R1 and R2                                 
CHAPTER FIVE                                                                                         
5.1              Manufacturing Processes for the Melon De-Husking
5.2              Assembly Process                                                                  
5.3              First Test Run                                                
5.4              Second Test Run with Treated Melon                                   
5.5              Cost Analysis                                                             
5.6              Conclusion                                                                 
5.7              Recommendation                                                                   
References                                                                                                    
CHAPTER ONE
1.1 INTRODUCTION
     Nigeria is an agricultural nation. Melon (Citrullus Vulgaris) is widely cultivated in Nigeria, among other seedlings during the planting season yearly. Several tones of the melon seeds are gathered each harvesting period but only very low percentage of the total harvest are dried by atmospheric draught and bagged for storage. High percentage waste is encored due to lack of good processing and storage facilities.
     Melon when properly processed yields a lot of by-products, which could be used as food or as raw material for small and large scale industrial manufacture melon is highly enriched with oil. It has about 45%  oil content. The oil could be extracted to form a very good source of vegetable oil.
          After pressing out the oil, the remaining product can be used as food for human of as an additive in agro-feed manufacture. Melon without oil can be grounded and used as thickener or binder in the chemical and pharmaceutical industries.
        The outside shell of the melon seeds when properly harvested in large quantity can equally be used in preparation of agric feed. The shell has about (12-55) MJ/kg calorific value and therefore can be used as a source of energy for industrial use.
         The major problems encountered in the processing of melon seeds are the removal of the yellow outside shell and the separation of the broken shells form the white seeds. Locally as at now, manual approach is used for the de-husking and separation. The consequence of this is low productivity, increase in processing time, and increase in human labour.
        A mechanized method of de – husking and separation will definitely increase productivity, reduce processing time and bring down human labour input to the  minimum.
       These problems arising form the manual de-husking and separation of the melon white seed from the shell necessitated the idea of designing, constructing and testing a melon de-husking and separation machine for our local communities and industries.
1.2 DESCRIPTION OF THE DESIGNED MELON
     DE-HUSKING AND SEPARATION MACHINE
       The assembly drawing of the designed de-husking and separation is shown in appendix.
The machine consists of the following components namely.
1)   Impeller
2)   Inlet hopper
3)   De-husking casing
4)   Inlet channel
5)   Casing cover
6)   Chequer linings
7)   Exit channel
8)    Adapter
9)    Blower
10) Electric Motor
11) Structural Stand
12) Blower Casing
13) Blower Impeller
14) Blower Casing Cover
15) Blower Suction Channel
16) Air exit channel
17) Blower mounting base
18) Flange bearings
19) Bolts and Nuts
20) Blower shaft
        The de-husking impeller is housed by the de-husking casing. The casing is lined with cylindrical chequers. The  cylindrical impeller is mounted very closely to the inside walls of the cylindrical casing leaving  a minimal gap to contain the melon seeds as they flow through this gap from inlet channel to the exit channel. The casing is covered with a cover plate. The impeller is connected to the shaft of the electric motor through an adapter. The blower impeller is housed by the blower casing. The blower sucks air from outside through the suction channel and the impeller forces the air through exist channel as required. All the arrangements of the machine are carried by the structural base. Bolts and nuts are used to ensure proper mounting of components on the structural base.
1.3 PRINCIPLES OF OPERATION                       
     The principle used by this machine to achieve the melon de-husking is attrition and density differential between the cracked shells and the white seeds is applied to achieve the required separation.
     The electric motor provides the primary motion which rotates the de-husking impeller. The melons are introduced through the inlet hopper of gravity. The melons are directed to flow towards the walls of the casing to the chequers. The rotating impeller then rub the melons on the chequers in the direction of rotation of the impeller. The melon must be properly treated with water (moisture) arieated properly before de-husking.
    The rubbing action peels the shells of the melons and equally move them along with the broken shells in the direction of rotation to the exit channel.
        The blower shaft transmits motion from the electric motor to the blower impeller, thereby delivering certain quantity of air which is channel to meet the broken shells and white seeds coming out from the de-husking casing.
    The broken shells being lighter than the white seeds are carried away by the air to a different direction while the white seeds move into a receiver where they are collected.
1.4 ADVANTAGES
i) The machine combines two processes in one ie de-
    Husking and separation.
ii. The machine is portable and occupies
     very little space.
iv. The machine is cheap when constructed locally,
     compared to cost of importation.
v. The machine can be confidently be driven by a
    single phase electric motor thereby making power
    consumption rate very low.
Vi. De-husking and separation time is highly
      reduced by using this machine.                              
vii. Labour input in de-husking and separation is also
      drastically reduced.
viii. Productivity in de-husking and separation is
       highly increased.
1.5 OBJECTIVE
(i) The objective of this project is to design, fabricate and test a melon de-husking and separation machine in order to increase productivity in melon processing and reduce human labour of manual de-husking and separation to the bearest minimum.
(ii) This project will improve the living standard of million of rural dweller who may engage in melon processing.
(iii) It will encourage the growth of small and medium scale industrial enterprise in the agric – processing nation wide.
(iv) This project will contribute to the overall economic development of the nation by encouraging indigenous engineers technologists and technicians in designing, fabricating and testing of processing machines.
1.6 SCOPE
     This machine only handles treated melon. The designed machine is expected to de-husk and separate about 450 kg of melon in an hours work. This is result in about 3, 600kg or 3.6 tonnes in eight (8) hours work.
1.7 BENEFICIARIES
i) The major beneficiaries of this project are rural dweller who might engage themselves in melon processing.
 ii)  Small, and medium scale agro-industrial set up who produce products like vegetable oil and food items.
iii) Chemical and pharmaceutical industries who might be using extracts from melon as binders, thickeners for drugs etc.
iv) Agro – feed industries who might be using melon as additive in feed production.

DESIGN OF MELON DE-HUSKING AND SEPARATION MACHINE
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0029
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 64 Pages
  • Methodology: scientific analysis
  • Reference: YES
  • Format: Microsoft Word
  • Views: 2.3K
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Mechanical Engineering
    Project ID MCE0029
    Fee ₦5,000 ($14)
    Chapters 5 Chapters
    No of Pages 64 Pages
    Methodology scientific analysis
    Reference YES
    Format Microsoft Word

    Related Works

    TABLES OF CONTENT CHAPTER ONE 1.1 Introduction 1.2 Description of the Design Melon 1.3 Principles of Operation 1.4 Advantages 1.5 Objectives 1.6 Scope 1.7 Beneficiaries CHAPTER TWO 2.1 Review of Some Properties 2.2 Some Local Variety of Melon Used 2.3 Manual De-Husking 2.4 Singular Method of Manual... Continue Reading
     INTRODUCTION Nigeria is an agricultural nation. Melon (Citrullus Vulgaris) is widely cultivated in Nigeria, among other seedlings during the planting season yearly. Several tones of the melon seeds are gathered each harvesting period but only very low percentage of the total harvest are dried by atmospheric draught and bagged for storage. High... Continue Reading
    “MARGARINE” PRODUCTION USING OIL BLENDS FROM PALM KERNEL, COCONUT AND MELON ABSTRACT Palm kernel, coconut and melon oils were extracted and refined. Their physical and chemical characteristics were examined. The refined oils were blended to produce three samples of margarine: palm kernel oil margarine (PKO), palm kernel and coconut oils... Continue Reading
    ABSTRACT Palm kernel, coconut and melon oils were extracted and refined. Their physical and chemical characteristics were examined. The refined oils were blended to produce three samples of margarine: palm kernel oil margarine (PKO), palm kernel and coconut oils margarine were tested for free fatty acid and Iodine value with the following results... Continue Reading
    “MARGARINE” PRODUCTION USING OIL BLENDS FROM PALM KERNEL, COCONUT AND MELON ABSTRACT Palm kernel, coconut and melon oils were extracted and refined. Their physical and chemical characteristics were examined. The refined oils were blended to produce three samples of margarine: palm kernel oil margarine (PKO), palm kernel and coconut oils... Continue Reading
    ABSTRACT Palm kernel, coconut and melon oils were extracted and refined. Their physical and chemical characteristics were examined. The refined oils were blended to produce three samples of margarine: palm kernel oil margarine (PKO), palm kernel and coconut oils margarine were tested for free fatty acid and Iodine value with the  following... Continue Reading
    ABSTRACT           Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper.   Also studied were the manners of dependence of these parameters on prints impressed on sheets of varied... Continue Reading
    ABSTRACT             Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper.   Also studied were the manners of dependence of these parameters on prints impressed on sheets of varied... Continue Reading
    ABSTRACT This work is an attempt to evolve a quicker and easier method of achieving cylindrical shape object from a work price. This will no double save considerable human labour and time wastage involved in traditional manual method of carving. To achieve this preliminary experiment was carried out... Continue Reading
    ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper. Also studied were the manners of dependence of these parameters on prints impressed on... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us