+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

CONSTRUCTION OF TABLE TOP LIQUIDLIQUID EXTRACTION UNIT

  • Type:Project
  • Pages:42
  • Format:Microsoft Word
(Chemical Engineering Project Topics & Materials)
ABSTRACT
A table top liquid-liquid extraction unit was constructed.  The project also involved the repair and servicing of peristaltic suction pump, by painting it, replacing the connecting cord to the power supply, refilling of the work out suction plates, teeth and general servicing of the equipment.  The glass absorption columns were provided as well as two yards length of transparent, soft, translucent synthetic chemical rubber (hose).  The two ends of the pipe were connected to glass absorption columns at their base outlet, a clip was also provided to stop the flow of liquid through the lose whenever it desired.  
Two conical flask of about 250ml in volume was also provided.
The repairs and servicing was made so that the suction pump may be capable of transporting liquid from are glass absorption column to another. 

TABLE OF CONTENT
TITLE PAGE
APPROVAL PAGE
LETTER R TRANSMITAL
DEDICATION        
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT        

CHAPTER ONE
INTRODUECTION
ASIM AND OBJECTIVE
SCOPE OF THE WORK

CHAPTER TWO 
THE LITERATURE REVIEW

CHAPTER THREE
EXTRACTION  EQUIPMENT
VERTICAL TOWARDS
AUXILIARY  EQUIPMENT

CHAPTER FOUR
CHOICE CONSTRUCTION MATERIALS
FOR LIQUID-LIQUID EXTRACTION UNIT
GLASS
BOROSILICATE GLASS
DISADVANTAGES OF BOROSILICATE GLASS
CARBON STEEL AND CAST IRON
DESIRABLE SOLVENT PROPERTIES FOR LIQUID EXTRACTION.
SELECTIVITY
DISTRIBUTION COEFFICIENT
RECOVERABILITY
CAPACITY
SOVENT SOLUBILITY
INTERFICIAL TENSION
DENSITY
TOXICITY PROCEDURE FOR OPERATION OF LIQUID EXTRACTION UNIT.
PROPETIES ENCOUNTERED.
DEFINITION OF TERMS.
PRECAUTIONS TO BE TAKEN IN LIQUID-LIQUID EXTRACTION UNIT.

CHAPTER FIVE
DISCUSSION
CONCLUSION
RECOMMENDATION
REFERENCES. 

CONSTRUCTION OF TABLE TOP LIQUIDLIQUID EXTRACTION UNIT

Share This

Details

Type Project
Department Chemical Engineering
Project ID CNG0298
Price ₦3,000 ($9)
No of Pages 42 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Chemical Engineering
    Project ID CNG0298
    Price ₦3,000 ($9)
    No of Pages 42 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT Office table and chairs usually come in set of three, and are designed to fit one into another for convenient storage. Furniture of this soot should be of the highest quality, attractive in design and capable of standing up to many years in use. The cost of the wood and the amount of time spent on... Continue Reading
    ABSTRACT The aim of this project was to construct one office table and four chairs. In the course of this project the length of plank used was 12” and we used about 4 number (mahogany) of 1” thickness, ¾ plywood of 1 sheet of 1” thickness, as well as ¼” plywood of ½ and glue 1 tin wenner 1 rod, foam ½ sheet.... Continue Reading
    ABSTRACT A mould can generally be defined as a pattern constructed for the production of the same shape and size. The constructional material differs from one operation to another. When one considers the money at hand, he decides whether to start from the primary production level or secondary... Continue Reading
    ABSTRACT A mould can generally be defined as a pattern constructed for the production of the same shape and size. The constructional material differs from one operation to another. When one considers the money at hand, he decides whether to start from the primary production level or secondary... Continue Reading
    ABSTRACT A mould can generally be defined as a pattern constructed for the production of the same shape and size. The constructional material differs from one operation to another. When one considers the money at hand, he decides whether to start from the primary production level or secondary... Continue Reading
    ABSTRACT The project of construction is one (1) horse power Air conditioning unit which was executed successfully. With up to seventy five percent (75%) efficient performance. The project started with the construction of the size of the air conditioning unit. The air conditioning unit is 60x40x 45cm in... Continue Reading
    ABSTRACT The design and construction of s refrigerating unit is handled from the knowledge of the working principles of laws of thermodynamics. The size of the containing vessel i.e the case as established to be of 45cm by 32 cm in dimension. The Angle iron mild steel to used in the fabrication and... Continue Reading
    ABSTRACT The design and construction of s refrigerating unit is handled from the knowledge of the working principles of laws of thermodynamics. The size of the containing vessel i.e the case as established to be of 45cm by 32 cm in dimension. The Angle iron mild steel to used in the fabrication and welding. The box case of two layers are... Continue Reading
    ABSTRACT Distillation unit is the judgment used for the separation of liquid mixture depending on the volatility of the component. It has the top section and bottom section. In the top section this is where more volatile component goes and the bottom section is where the divider or less volatile component... Continue Reading
    ABSTRACT This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number. The device works with principle of chance... Continue Reading