+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

DESIGN AND FABRICATION OF CREEP MATERIAL TESTING EQUIPMENT

  • Type:Project
  • Pages:50
  • Format:Microsoft Word
(Mechanical Engineering Project Topics & Materials)
ABSTRACT
The process involved in the design and fabrication of a creep material testing equipment ranges from carrying out the feasibility studies of the project to the designed and especially of ensuring its functionality.  Since it is used in the testing of failure of material under loading, different engineering principles employed in the design and fabrication includes bending moments and deflection of beam etc.  the main objective of this project is to design a mechanical structure that can test the failure of substance hence creep s defined as the failure of substance under continuous loading.  It also involves the cutting of the specimen that will be used to conducting the test.
After the completion of the different components of the machine, it is assembled and a test turn conducted.
As a result, it was finally observed that creep material testing equipment is used in determining the failure of material under continual loading.


TABLE OF CONTENTS
TITLE PAGE
LETTER OF TRANSMITAL
RELEASE PAGE
CERTIFICAITON
APPROVAL PAGE
DEDICAITION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENTS

CHAPTER ONE
1.0 INTRODCUTION
1.10 CREEP CONCEPT
1.11 CREEP TESTING MACHINES
1.12 THE PURPSOE OF THE PROJECT
1.13 DEMAND FOR THE EQUIPMENT 
1.14 LITERATURE REVIEW
1.15 KINDS OF PHENOMNA
1.16 EXAMPLES
1.17 MECHANISM

CHAPTER TWO
2.0 DESCRIPTION OF APARATUS AND DESIGN THEORY
2.10 STATIC EQUILIBRIUM CONDITION 
2.11 PRINCIPAL OF DEFLECTION IN CANTILEVER 
2.12 CANTILEVER WITH UNIFORMLY DISTRIBUTED LOAD W PER UNIT LENGTH
2.13 BENDING ANALYSIS FOR A C-CHANNEL SECTION

CHAPTER THREE
3.0 CALCUALTION
3.10 CALCULATING THE MOMENT OF INERTIA OF THE C-SECTION USING GRAPHIC METHOD
3.11 CALCULATION OF THE MAXIMUM LOAD
3.12 CALCULATION THE BENDING MOMENT

CHAPTER FOUR
4.0 FABRICATION
4.10 EXPERIMENTAL PROCEDURE AND RESULT
4.11 LEAD SPECIMEN AT OTHER TEMPERATURES
4.12 METHOD OF ASSEMBLY
4.13 PRINCIPAL OF OPERATION

CHAPTER FIVE
5.0 BILL OF QUANTITIES
5.10 POSSIBLE PROBLEMS OF CREEP TESTING EQUIPMENT AND RECOMMENDATION 
5.11 FUTURE OF THE TECHNOLOGY 
5.12 SCALE
5.13 CONCLUSION
5.14 REFERENCES

DESIGN AND FABRICATION OF CREEP MATERIAL TESTING EQUIPMENT

Share This

Details

Type Project
Department Mechanical Engineering
Project ID MCE0198
Price ₦3,000 ($9)
No of Pages 50 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Mechanical Engineering
    Project ID MCE0198
    Price ₦3,000 ($9)
    No of Pages 50 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT The process involves in the design and fabrication of a creep testing equipment ranges from carrying out the feasibility studying of the project to be designed in terms of functionality. Since it is used in the testing of failure of material under loading different engineering materials... Continue Reading
    ABSTRACT This project work deals with the design and fabrication of a suitable journal bearing test apparatus which can help in visualizing the behavior of journal bearing and its characteristics, and in determining the bearing parameters such as load bearing capacity, maximum oil film temperature, viscosity of lubricant, oil film pressure, and... Continue Reading
    ABSTRACT This project work deals with the design and fabrication of a suitable journal bearing test apparatus which can help in visualizing the behavior of journal bearing and its characteristics, and in determining the bearing parameters such as load bearing capacity, maximum oil film temperature, viscosity of lubricant, oil film pressure, and... Continue Reading
    ABSTRACT A 1.05 cubic metre capacity storage facility which is to increase the shelf life of stored vegetables as designed fabricated and tested. The equipment operates on the principle of evaporative cooling and increasing the relative humidity of the interior of the equipment. The door and the back wall were of particle board of 12mm thickness... Continue Reading
    ABSTRACT An equipment design project was carried out to design an inverter (Bioreator) or the production of 100,00 metric tones per year of ethanol from sugar cane. An inverter is a part of process equipment used in ethanol production from sugar cane. While the rest process equipment include crusher, filter, centrifuge, fermented, distribution... Continue Reading
    ABSTRACT Man’s impact on global environment system especially in the area of dust extraction is now at a scale where it is disrupting. These dust extractors varies in major ways. The environmental degradation is, in turn contributing to health threat in this part of the globe. Unfortunately most factories, workshops which suppose to posses... Continue Reading
    ABSTRACT Children swing plays a unique role in the live and upbringing of a child. It makes children to avoid dangerous games thereby providing them on opportunity for proper relaxation. The children swing consists of a cost iron metal that is welded with a chain and set that makes children move to and fro... Continue Reading
    ABSTRACT Knowledge could only be obtained successfully by the use of book for research but unfortunately because of hard times, books have become very expensive.  This is called for presentation of books already purchased whether in the library or on the household so that it can be used by the future generation.  There could only be done by... Continue Reading
    ABSTRACT The designed Air Driven Engine is an economic friendly engine which operates with the aid of a compressed air. In principle, an Air Driven Engine uses the expansion of compressed air to drive the pistons of an engine. An Air Driven Engine is a pneumatic actuator that creates useful work by expanding compressed air. There is no mixing of... Continue Reading
    ABSTRACT Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading