+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

CONSTRUCTION OF METAL DETECTOR

  • Type:Project
  • Pages:41
  • Format:Microsoft Word
(Electrical Engineering Project Topics & Materials)
ABSTRACT
Metal detectors are electronics sensors that indicate the presence of metallic object without making physical contact with object. They are effective and useful security tools employed in strategic places such as airport, bank, stadiums, government houses and also in production industries to detect presence of metallic object on person luaggages, consignments foods, drugs garments etc. The study present a metal detector comprising a radio frequency oscillator, demodulating unit, triggering unit and output unit. A transistor colpit oscillator is used with its inductor being a toroidal coil, this acting as a transducer converting magnetic variation to voltage level changes through director feedback mechanism. The bank circuit is set such that the feedback outage is just sufficient to maintain oscillation. Magnetic variation caused by metallic object distort the initial set position, automatically cutting of oscillation and hence the transistor due to the biasing techniques employed the trigger section switches to low level and higher level depending on the output of the demodulator, which switches ON and OFF the (Led) light emitting diode and cuases the buzzer to produce and an active toner. It detects both ferrous and metal at a range determined by the type of material and its relative size.

TABLE OF CONTENTS
Cover Page -- -- -- -- -- -- -- -- -- -- i
Title Page -- -- -- -- -- -- -- -- -- -- ii
Approval Page -- -- -- -- -- -- -- -- -- iii
Dedication -- -- -- -- -- -- -- -- -- -- iv
Acknowledgement -- -- -- -- -- -- -- -- v
Abstract -- -- -- -- -- -- -- -- -- -- vi
Table of contents -- -- -- -- -- -- -- -- -- vii
List of Figure -- -- -- -- -- -- -- -- -- ix

Chapter one
1.1 Background of the Study -- -- -- -- -- -- 1
1.2 Purpose of the Project -- -- -- -- -- -- -- 7
1.3 Justification of the Project -- -- -- -- -- -- 7
1.4 Scope of the Project -- -- -- -- -- -- -- 8
1.5 Limitation/Constraints -- -- -- -- -- -- -- 8
1.6 System Block Diagram -- -- -- -- -- -- -- 9
1.7 Project Report Organization -- -- -- -- -- -- 10

Chapter Two
2.1 History and Development of Metal Detector -- -- -- 12
2.2 Types of Metal Detector -- -- -- -- -- -- 14
2.3 Uses and Application -- -- -- -- -- -- -- 16
2.3.1 Security Screening -- -- -- -- -- -- -- 16
2.3.2 Hobby Security -- -- -- -- -- -- -- -- 17
2.3.3 Industrial Application -- -- -- -- -- -- -- 17
2.4 Modes of Operation of Metal Detector -- -- -- -- 18

Chapter three
3.1 Circuit Diagram of a Metal -- -- -- -- -- -- 19
3.2 List of Components Used -- -- -- -- -- -- 19
3.3 Resistors -- -- -- -- -- -- -- -- -- 26
3.4 Operational Amplifier -- -- -- -- -- -- -- 29
3.5 Nand Gate -- -- -- -- -- -- -- -- -- 30
3.6 Design Analysis -- -- -- -- -- -- -- -- 31

Chapter Four
4.1 Construction Steps -- -- -- -- -- -- -- 33
4.2 Packaging -- -- -- -- -- -- -- -- -- 35
4.3 Bill of Engineering and Means of Evaluation -- -- -- 37
Chapter Five
5.1 Conclusion -- -- -- -- -- -- -- -- -- 38
5.2 Result -- -- -- -- -- -- -- -- -- 39
5.3 Recommendation -- -- -- -- -- -- -- -- 39
References -- -- -- -- -- -- -- -- -- 41
CONSTRUCTION OF METAL DETECTOR

Share This

Details

Type Project
Department Electrical Engineering
Project ID ELE0199
Price ₦3,000 ($9)
No of Pages 41 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Electrical Engineering
    Project ID ELE0199
    Price ₦3,000 ($9)
    No of Pages 41 Pages
    Format Microsoft Word

    Related Works

    A BSTRACT The project work titled Design and construction of a metal detector. When fully design and implemented would be able to detect any metallic material that is passing or coming close. This function would serve as a security check for dangerous metallic material as an alarm. Going by the sophisticated means of armed rubbers adopt these days... Continue Reading
    ABSTRACT An alcohol detector: - is a electronic device that detect alcohol in the breath of a person that has consumed the liquire. In this project, the design involved the hardware module and software module. The hardware module consist of sensor circuit (MQ – 3), the pic (Microcontroller circuit), the L.C.D. Circuit and the alarm circuit. The... Continue Reading
    ABSTRACT This project deals on the design and construction of an intruder detector for home and office use. Security as one of the biggest issues in our world today and we need a system that will be able to monitor our home, offices and industries by using two sensing... Continue Reading
    ABSTRACT This project is design and construction of a sound detector with alarm system was done primarily to detector sound. It can be use in industrial and domestics. It employ four discreet stages with power supply which power the system. The 1st block is pick up amplifier containing... Continue Reading
    ABSTRACT             This project is design and construction of a sound detector with alarm system was done primarily to detector sound. It can be use in industrial and domestics. It employ four discreet stages with power supply which power the system.             The 1st block is pick up amplifier containing the microphone... Continue Reading
    ABSTRACT This project work deals on the Design and Construction of Intruder Detector Alarm System with Direction/Location Displaywhich is capable of detecting intrusion at any location, sound and alarm and display the exact location of the intruder using... Continue Reading
    ABSTRACT This project report is on the construction of a metal rack which can be put to use in laboratories, industries, shops, kitchens, and also for displaying various articles. The construction work was done in a mechanical work shop. Racks are of various types which concides with the numerous uses to which they are... Continue Reading
    ABSTRACT In this construction of metal shelf, mild steel was chosen due to its inherit duties. The undismountable metal shelf, which has four compartments and four partition was constructed under the following processes. This  includes drawing and dimensioning of the proposal metal. Metal shelf, market surveying and procurement of the needed... Continue Reading
    ABSTRACT In this construction of metal shelf, mild steel was chosen due to its inherit duties. The undismountable metal shelf, which has four compartments and four partition was constructed under the following processes. This includes drawing and dimensioning of the proposal metal. Metal shelf, market surveying and... Continue Reading
    ABSTRACT In our society today reading and writing has taken its roll as a way of measuring human knowledge. Knowledge could only be obtain successively by the use of books for research but unfortunately because of hard time, books have because very expensive. This has called for preservation of... Continue Reading