The electrical popcorn machine is a device for preparing especial popcorn for the human consumption. The device in produced to help the masses to be self valiance in this are of down trodden economy.
This project work is divided into five chapters, chapter one; the introduction discusses the relevance of the project work, problems it is meant to address its importance, scope and limitation and definition of terms.
Chapter two comprises the deign and construction, component and fabrication. The various types of heating elements and electric motors and then operation are discussed.
Chapter three brings to the assembly, principles of operation and control of the motor.
Chapter four highlights about the various safety rules project cost evaluation and investment opportunity.
Chapter five discussed on insertion and testing recommendation and conclusion together with references and bibliography.
TABLE OF CONTENTS
Letter of Transmittal
Table of Contents
1.2 Design Construction, and Fabrication, Problem
1.3 Objectives of the design (benefits of automatic against manual)
1.4 Scope and limitation
1.5 Importance of the project
1.6 Definition of terms
2.1 Electric motors
2.2 Heating element (specification and design)
2.3 Heat Transfer
2.4 Stress Analysis
3.1 Electrical Connection
3.2 Principles of operation
3.3 Usage and Maintenance of Machine
4.1 Safety Precaution
4.2 Project Cost Evaluation.
5.1 Inspection and Testing
5.2 Recommendation and Conclusion
THE DESIGN AND FABRICATION OF AN ELECTRIC POPCORN FRYING MACHINE
CHAPTER ONE 1.1 INTRODUCTION Nigeria’s economy has suffered a terrible setback over the year the common man finds it difficult to make for his livelihood, some people take pop-corn as one of their favorite food especially bachelors spinsters who can take pop-corn as super, breakfast and even lunch. The University and Polytechnics graduate no... Continue Reading
CHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUND Cassava which is known biologically as “manihotesculentacrantz” is a crop which has many varieties. Cassava, is a perennial woody shrub in the Euphorbiaceous (Spurge family) native to South America, but now grown in tropical and sub-tropical areas... Continue Reading
ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading
CHAPTER ONE INTRODUCTION The project is a pre-requisite for the award of Higher National Diploma (HND) in Mechanical Engineering. The project “Design and fabrication a corn shelling machine” is indeed an essential one in a time like this when almost al human endeavour is embracing technology for... Continue Reading
ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints impressed on sheets of varied thickness. The... Continue Reading
ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints... Continue Reading
ABSTRACT. A machine for corn Sheller is highly and greatly needed for consistence of usage of corn in local and international levels. With regards to this indispensable need, a corn-shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to this design objective and aims, a proper... Continue Reading
THE DESIGN AND FABRICATION OF A IRON SHELLING MACHINE ABSTRACT. A machine for corn Sheller is highly and greatly need for consistence of usage of corn in local and international levels. With regards to this indispensable need, a corn-shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to... Continue Reading
THE DESIGN AND FABRICATION OF A CANDLE MOULDING MACHINE ABSTRACT The idea of producing “candle stick” brought the existence of fabricating a “candle moulding machine” which can produce a desired shape of a candle foe the benefit of mankind. In chapter 1, which is the research work of the project carried out, the problem encountered and the... Continue Reading
ABSTRACT To achieve the aim of producing a functional and efficient wood lathe machine. We analyzed and as well synthesized the different possible design solutions and concepts. We carried out the analysis of different component part of the machine to determine their suitable dimensions based on loading... Continue Reading