+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

CONSTRUCTION OF KEROSINE COOKING STOVE

  • Type:Project
  • Pages:53
  • Format:Microsoft Word
(Chemical Engineering Project Topics & Materials)
ABSTRACT

The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts.
The technological properties passed by the chosen mild steel are; machinability ,weldability,durability,andformability.mech2nude properties includem2llebillity,duetility,st2tic strength and high tensile strength .
The sequence of operation followed by the construction are; Literature review, material selection-fabrication evaluation and possible redesign and modification. The fabrication processes of the metallic material includes the making out, cutting bending hammering, joining, welding, grazing, smothering and finally printing.
A consideration of the operational environment which the store will function was taken into account and a material selection which has the ability of being prevented by coating from corrosion –mild steel was chosen.
After the construction, the operational efficiency was tested and is 92% effective that is, produces bluish flame which indicates that the aim of the construction was achieved.
The costing, which is the overriding factors, was tabulated headed under material costing labour costing and overhead costing.
Mode of operation of the store and the precautionary measure was also included in order to give the store a maximum service life.

TABLE OF CONTENTS
TITLE PAGE
LETTER OF TRANSMITTAL
APPROVAL PAGE
DEDICATION
ACKNOLEDGEMENT
ABSTRACT
TABLE OF CONTENTS

CHAPTER ONE
1.0   INTRODUCTION

CHAPTER TWO
1.1   LITERATURE REVIEW
1.1.1 A REVIEW OF KEROSINE
1.1.2 A REVIEW OF KEROSINE EXPLOSION
1.1.3 BURNING VELOCITY MEASUREMENT
1.1.4 A BRIEF LITERATURE REVIEW ON FOSSIL FUEL
(A)   FOSSIL FUELS
(B)   CHARACTERISATION OF FOSSIL FUEL
(C)   COMBUSTION OF FOSSIL FUELS
(D)   COMBUSTION OF LIQUID FUELS (KEROSINE)
(E)   COMBUSTION STOICHEMISTRY
(F)   THEORTICAL AIR AND CARBONDIOXIDE FOR COMBUSTION OF INDUSTRIAL FUELS.
1.1.5 HEAT( FIRE) PROCESS EQUIPMENT
(A)   DIRECT FIRED PROCESS EQUIPMENT
(B)   INDIRECT FIRED (HEAT) PROCESS
1.1.6 A REVIEW- LITERATURE ON CONSTRUCTIONAL ENGINEERING MATERIALS 
(A)   IRON AND STEEL 
(B)   STEEL 
(C)   CLASSIFICATION OF STEEL
(D)   HARDENABILITY AND THE INFLUENCE OF ALLOYING ELEMENTS IN STEEL.
(E)   CRITICAL YEMPERATURES IN PLAIN CARBON STEEL
(F)   TOOL SHEEL
(G)   MARAGING STEEL
(H)   HIGH ALLOY CORROSION SCALE STEEL
1.1.7 MECHANISM OF STOVE OPERATION
1.1.8 PROPERTIES OF MATERIALS FOR CONSTRUCTION OF KEROSENE STOVE

CHAPTER THREE
3.1   CONSTRUCTIONAL PROCESS AND CARE OF THE STOVE.
3.2   CONSTRUCTIONAL PROCEDURES
3.3   DETAILS OF THE CONSTRUCTION – COMPONENTS
3.3.1 FABRICATION OF THE BURNER
3.3.2 STEPS OF FABRICATING STOVE JACK
3.3.3 STEPS FOR FABRICATING THE STOVE CASINE 
3.3.4 CONSTRUCTION OF THE BODY
3.3.5 PAINTING.

CONSTRUCTION OF KEROSINE COOKING STOVE

Share This

Details

Type Project
Department Chemical Engineering
Project ID CNG0210
Price ₦3,000 ($9)
No of Pages 53 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Chemical Engineering
    Project ID CNG0210
    Price ₦3,000 ($9)
    No of Pages 53 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties... Continue Reading
    ABSTRACT The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the chosen mild steel are;... Continue Reading
    ABSTRACT This project is concern about the construction of an electrical stove with three oven apartment is described in his project. It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternat6ive means to replace the... Continue Reading
    ABSTRACT This project is concern about the construction of an electrical stove with three oven apartment is described in his project. It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternative means to replace the use of keroseneand gas for cooking and drying which are often... Continue Reading
    ABSTRACT            This project is concern about the construction of an electrical stove with three oven apartment is described in his project.  It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternat6ive means to replace the use of  kerosine and gas for cooking... Continue Reading
    ABSTRACT Kerosene has been an important household fuel since the mid-19th century. In developed countries its use has greatly declined because of electrification. However, in developing countries, kerosene use for cooking and lighting remains widespread. This research work is focused statistical... Continue Reading
    Production of biodiesel from micro algae oil... Continue Reading
    ABSTRACT The study titled 'The effect of temperature and cooking time on the protein content of three species of cowpea' is aimed at determining and comparing temperature effect on the protein content of cowpea. Three different species of cowpea was obtained at tudun wada market. The cowpea sample was cooked at different temperature and cooking... Continue Reading
    ABSTRACT This project is an equipment which been fabricated for the principle purpose of producing heat energy for commercial use by burning solid fuel like briquette. The project which is the fabrication of briquette stove was made from preferentially selected engineering materials like mild steels of different... Continue Reading
    ABSTRACT This project is an equipment which been fabricated for the principle purpose of producing heat energy for commercial use by burning solid fuel like briquette. The project which is the fabrication of briquette stove was made from preferentially selected engineering materials like mild steels of different gauge member and metallic rod.... Continue Reading