+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

PRODUCTION COST CONTROL IN MANUFACTURING ORGANISATION

  • Type:Project
  • Chapters:5
  • Pages:34
  • Format:Microsoft Word
(Banking and Finance Project Topics & Materials)

PRODUCTION COST CONTROL IN MANUFACTURING ORGANISATION

 

ABSTRACT

This research work is based on the production cost control in manufacturing organization.

The study was motivated on how to control cost in manufacturing industries in order to achieve the purpose of which the industry is establish.

To solve the research problem the researchers made use of only secondary source of data, since the guidelines for writing the ND research work in banking and finance was restricted to secondary source of data.

The research instrument used to collecting the data were textbook, journal, magazine, newspaper. Etc.

Also, based on data collection form secondary soruce, it is quite obvious that I have found out that for production cost control to fully and well carried out, there should be combination of man and material resources in efficient manner.  Also, that the need for cost control is very important in the sense that it increase profitability of manufacturing firm.

Finally, I discover that may organization neglect the issue of internal control system in cost control and thereby call attention for immediate implementation of this in our manufacturing industry.

TABLE OF CONTENT

Title page                                                                                ii

Approval page                                                                        iii

Dedication                                                                               iv

Acknowledgement                                                                   v

Abstract                                                                                  vi

Table of content                                                                      viii

CHAPTER ONE

Introduction                                                                            1

1.1            Background of study                                                     1

1.2            Statement of the problem                                              3

1.3            Purpose/objective of the study                                       3

1.4            Significance of the study                                                4

1.5            Limitation of the study                                                  4

CHAPTER TWO

Review of Related literature                                                    5

CHAPTER THREE

Research Design and methodology                                          20

3.1            Sources of Data (secondary sources only)                     20

3.2            Location of data                                                             20

3.3            Method of data collection                                              21

CHAPTER FOUR

Findings                                                                                  22

CHAPTER FIVE

Conclusion and recommendation.                                           24

Bibliography                                                                           28

 

 

 

 

CHAPTER ONE

1.0            INTRODUCTION

1.1     BACKGROUND OF STUDY

The main aim of this research work is an attempt to verify the indiscriminate increase in the prices of commodities produced in this part of the country by manufacturing organization and companies.  This continuous rise in prices has attracted the attention of many citizens, mostly those who have ignorant of the adverse effect of this continuous rise in the prices on the citizen and the country economy.

This research paper will therefore aim at giving a comprehensive account of the control of cost in the production field with emphasis on the manufacturing organization.  The attribute of every organization is the pursuit of a goal and this goal exists in different forms.  It is evident, therefore that every manufacturing organization be it sloe, partnership, corporation, among others have an objective and this primary objective is profit maximization other objective such as social is purely secondary and solely depend on the profit.

Profit is the surplus or excess of to all income over total cost during a specific period of time.  It therefore follows that before any organization can make profit, they must exercise control over their production and services.

There are other one still under production and the best ingredients are used for production in PRODA. Administration and Staffing.  Although the government Board has responsibility for general management as set out in the natural science and Technology, Act 1980, the day to day running of the institute is the function of the direct or research.

Administration, the institute is organized into divisions science, Engineering, ceramics and administration.

The activate division form the point of view of research and development functions are science, Engineering  and ceramics.

In order, both their research and development work and their production work be given equally emphasis each of these activities division is in turn organized into research units. 

 

1.2            STATEMENT OF THE PROBLEM

Many organizations operating in our country today try every effort to make use of they break even in order to make profit, still al these efforts seems t be worthless.  They reduce their cost in order to maximize as suppose to be, why do so many organization still not breakeven, not to talk of making profit after all their efforts to control cost?

Does it mean that their cost control is not effective?  The researcher will give answer to these questions in his subsequent chapters.

 

1.3     PURPOSE/OBJECTIVE OF THE STUDY    

Some of the objectives of this research work is

i.        To assess the various production cost control techniques and effectiveness as well s the efficiency.

ii.       To know some of importance and need for cost control.

iii.      To know cost control and reduction Technique in manufacturing originations.

Iv     To know the use of budgetary control system manufacturing organization.

V       To know the use of budgetary control system in cost control

 

1.4     SIGNIFICANCE OF THE STUDY

This research work as carried out by the research on production cost control in manufacturing organization will be of great important to so many manufacturing firms in the area of cost control in order to maximize profit.  Also individuals who are interested in entering into the business manufacturing will equal benefit from this project.

1.5     LIMITATION OF THE STUDY

The following limitations were faced by the researcher and limit efforts in elaborating the researcher work. 

Finance:  The researcher is a student with no souce of income and has been discouraged from traveling to all the labour market in Nigeria to collect dta for this study.  She ahs therefore chosen Enugu metropolis because of proximity and ease of contract to the workers.

Time:   This project work has just one semester time limit.  It would have been desirable for a longer time to complete the topic and extend the coverage but it was not possible.

Pressure from Academic Work:  The student was jam-packed with other academic activities and at the same time writing this research work and this brought little difficult in finishing this research work on time.

Share This

Details

Type Project
Department Banking and Finance
Project ID BFN0702
Price ₦3,000 ($9)
Chapters 5 Chapters
No of Pages 34 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Banking and Finance
    Project ID BFN0702
    Price ₦3,000 ($9)
    Chapters 5 Chapters
    No of Pages 34 Pages
    Format Microsoft Word

    Related Works

    TABLE OF CONTENT CHAPTER ONE 1.1 Introduction 1.2 Examples of manufacturing organisation and other production cost 1.3 Definition of terms CHAPTER TWO 2.1 Production cost control definition 2.2 Importance of cost control 2.3 Needs for cost control 2.4 Cost control and reduction techniques 2.5... Continue Reading
    : A CASE STUDY OF SEVEN UP BOTTLING COMPANY CHAPTER ONE INTRODUCTION 1.1     BACKGROUND TO THE STUDY Production planning and control is simply the analysis involved in transforming raw material or components into finished products, integrated... Continue Reading
    PREFACE The primary objective of this research project work is to examine critically the various cost control measures being used by manufacturing organization using project development institute as a case study; and to propose... Continue Reading
    CHAPTER ONE INTRODUTION Production is the central point of any manufacturing concern basically, it is the stage where real action takes place either the transformation of raw materials (input) into... Continue Reading
    (CASE STUDY OF BLACKWORTH CONSTRUCTION COMPANY, KWARA STATE). CHAPTER ONE INTRODUCTION 1.1.           BACKGROUND TO THE STUDY A business objective is the starting point for any business organization to thrive and it provides direction for action. It is... Continue Reading
    ABSTRACT This research report was carried out to ascertain whether traditional costing techniques (standard, marginal and absorption costing) are still relevant for today’s demand and greater cost accuracy. Managers and Accounting are confused about which of these techniques will enhance effective cost control and effective management decision.... Continue Reading
    (A Case Study Of Cadbury Nigeria Plc)   ABSTRACT The topic of this research work is inventory control as an effective tool for cost control in an organization using Cadbury Nigeria plc as a case study. Inventory control can be defined as the implementation of... Continue Reading
    (A CASE STUDY OF GUINNESS NIGERIA PLC, BENIN CITY) ABSTRACT This study is primarily concerned with finding out the role of cost control techniques in the assessment of manufacturing company. The study however, was carried out to know the effect cost control has in the Benin branch of Guinness... Continue Reading
    TABLE OF CONTENTS Chapter one Introduction 1.0 Background of the study 1.1 statement of the problem 1.2 Aims and objectives of the study 1.3 Significance of the study 1.4 Scope and limitations of the study 1.5 Research methodology 1.6 Organization of the study 1.7 Definition of terms References... Continue Reading
    (A CASE STUDY OF CHISCO BAKERY INDUSTRIES  ENUGU ) ABSTRACT Maximization of profit is the pursuit of every business organization profit itself is the excess of revenue over expenditure. To obtain profit, increase in selling price of the product or reduction in the cost of production is... Continue Reading