+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

DESIGN AND IMPLEMENTATION OF A COMPUTERIZED INFORMATION MANAGEMENT SYSTEM IN SEISMIC DATA PROCESSING

  • Type:Project
  • Chapters:7
  • Pages:56
  • Format:Microsoft Word
(Computer Science Project Topics & Materials)

DESIGN AND IMPLEMENTATION OF A

COMPUTERIZED INFORMATION MANAGEMENT SYSTEM IN SEISMIC DATA PROCESSING

ABSTRACT

Oil industry is a prominent aspect of modern economy and as it were exploration activities are very important for continuity of oil production.

The exploration activities involve the acquisition of data and processing.  As exploration activities increases in the modern world, the computer manufactures are also working hard to produce. Supper computer and their processing that are involved.

Many firms are emerging fast and of course modern firms make the use of computers, especially the mainframe computer which has large memory space.  As the activities is in the increase, there is need to increase storage facilities because there comes a time when the main memory of computer will be unable to hold all information required.  This is where the secondary storage device called the magnetic tape comes to play.

A general description of the system goals, facilities and application are involved.

TABLE OF CONTENT

CHAPTER ONE

BACKGROUND OF THE STUDY

1.1              Introduction

1.2              Statement of the problem

1.3              Purpose of the study

1.4              Objective of the study

1.5              Scope of the problem or project

1.6              Limitations of the study

1.7              Assumption

1.8              Definition

CHAPTER TWO

LITERATURE REVIEW

CHAPTER THREE

DESCRIPTION AND ANALYSIS OF THE EXISTING SYSTEM

3.1              General Description of the existing system

3.2              Method of data collection used

3.3              Objective of the Existing System

3.4              Organizational Structure

3.5              Input Analysis

3.6              Process Analysis

3.7              Output Analysis

3.8              Information flow Diagram

3.9              Problem of the Existing system

3.10          Justification for the new system

CHAPTER FOUR

DESIGN OF THE NEW SYSTEM

4.1              Input specification and design

4.2              Output specification and design

4.3              File design

4.4              Procedure chart

4.5              System flowchart

4.6              System Requirement

CHAPTER FIVE

IMPLEMENTATION

5.1              Program Design

5.2              Program flowchart

5.3              Pseudocodes

5.4              Source program listing

5.5              Text run.

CHAPTER SIX

6.1              System documentation

6.2              Program documentation

6.3              Users documentation

CHAPTER SEVEN

CONCLUSION AND RECOMMENDATION

7.1              Conclusion

7.2              Recommendation

BIBLIOGRAPHY

CHAPTER ONE

1.1              INTRODUCTION

The exploration activities involve the acquisition of data and processing.  As the exploration activities increases in the modern world, the computer manufactures are also working hard to produce super computers and their processing algo: This with high computing power to cope with the lager data processing that are involved.

Owing to the inevitable roles that are played by the oil industries in the modern world, the federal govt.  recently issues out a white paper enforcing all oil companies to do more exploration to increase oil reserver.  This means that there will be more data acquisition and processing jobs in the near future.

The importance of oil exploration in modern countries can never be over emphasized.  In the United State of America and Britain, intensive exploration activities are on for the last two decodes all in attempt to have enough oil reserves.

And so seismic data processing is very indispensable in the oil industry because it is the first step taken in the discoming of hydrocarbon or better more seismic data processing is a key sequence in search for hydrocation.

In the processing of seismic data, care should be taken because of not properly processed, it might lead to wrong interpretation and this might lead to false prospect.  Infact wrong processing will reduce the success ration in the discovery of hydrocarbon and this causes the cost of drilling to increase.  In essence, wrong processing will lead to drilling false prospect and he know that it costs millions if not billions of Naira to dill a well.

The role of govt. in oil industry had gradually progressed from a regulatory one to direct involvement in all exploitation and exploration initially government only made rudimentary laws and collected royalties for the oil companies.  By 1971 the situation charged as oil become more important to the Nigeria Economy.  Oil accounts for about 90% of the  total foreign exchange earning for the country.

In essence, Nigeria that wants increase in her revenue, must engage in acquisition, processing and management of seismic data.  Seismic data management systemic therefore a software development for the purpose.  That is why the case study was the integrated data services limited (IDSL) Benin city a subsidiary of the Nigeria National Petroleum Co-operation (NNPC)

1.2              PROBLEMS OF THE STUDY

In the search for hydrocarbon, the initial question had always been where exactly under the surface are the anticlines or the structures within which the hydrocarbon can be accumulated.

This question is answered in part by seismic data acquisition and the main by seismic data processing transforms and refines these data to level where the above question is answered.

The problem is how can these information collected from the field be presented and protected from destruction.  That is why the tape librarians were introduced to help in managing these tapes, but as time goes on they cannot manage them effectively.  This has created many problem for the management

The solution to the problem will lie in removing any factors that inhibit the ability of the librarian to make the storage and the retrieval of tapes easy in the organization.

1.3              PURPOSE OF THE STUDY

This research will be very useful to both student individuals, co-operate bodies and general public as a whole who are either engaged or way wish to engage in seismic data acquisition and processing in the future

            The purpose are as follows

1                    Ensuring the acquisition of good quality seismic data in an effective manner.

2                    Ensuring that all field tapes collected from the field are sent to the processing centre and then its seismic data in tapes are presented in a form that is convenient for geological interpretation.

3                    To ensure that processing sequence are followed and a good result suitable for acceptance.

1.4              OBJECTIVE OF THE STUDY

For fast data processing you ensure reliable of data to discover more hydrocarbon.  To increase revenue by engaging in acquisition processing and management.

1.5              SCOPE OF THE STUDY

In this research work the study was limited to the use of Electronic Data Processing (EDP) on the information management control in seismic Data processing.

1.7       ASSUMPTION

            It is assumed that if this program is properly implemented.  It will go along way to eradicate the challenges and constrength encounted in the existing system.

1.8       DEFINITIONS

COMPUTER: An electronic device that is capable of accepting data, processing data automatically, store it produces the result where needed.

FILE:              this is collection of related record

PROGRAM:   A set of logical instructions combined together to perform a specific task to a given problem and providing solution to it.

OUTPUT:       Result of the processed data by the computer

INPUT:           Data supplied to the computer for processing.

DATA:            Raw materials used by the computer.

INFORMATION:      Processed data.

STORAGE DEVICE:            A device for storage data in the system

SEISMIC:       It is something caused by earthquake.

DESIGN AND IMPLEMENTATION OF A COMPUTERIZED INFORMATION MANAGEMENT SYSTEM IN SEISMIC DATA PROCESSING
Share This

Details

Type Project
Department Computer Science
Project ID CPU0711
Price ₦3,000 ($9)
Chapters 7 Chapters
No of Pages 56 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Computer Science
    Project ID CPU0711
    Price ₦3,000 ($9)
    Chapters 7 Chapters
    No of Pages 56 Pages
    Format Microsoft Word

    Related Works

    DESIGN AND IMPLEMENTATION OF A COMPUTERIZED INFORMATION MANAGEMENT SYSTEM IN SEISMIC DATA PROCESSING ABSTRACT Oil industry is a prominent aspect of modern economy and as it were exploration activities are very important for continuity of oil production. The exploration activities involve the acquisition of data and processing. As exploration... Continue Reading
    DESIGN AND IMPLEMENTATION OF A COMPUTERIZED INFORMATION MANAGEMENT SYSTEM IN SEISMIC DATA PROCESSING ABSTRACT Oil industry is a prominent aspect of modern economy and as it were exploration activities are very important for continuity of oil production. The exploration activities involve the acquisition of data and processing.  As exploration... Continue Reading
    DESIGN AND IMPLEMENTATION OF COMPUTERIZED INFORMATION MANAGEMENT SYSTEM IN SEISMIC DATA PROCESSING (A CASE STUDY OF INTEGRATED DATA SERVICES LIMITED, IDSL BENIN-CITY) ABSTRACT Oil industry is a prominent aspect of modern economy and as it were exploration activities are very important for continuity of oil production. The exploration activities... Continue Reading
    CHAPTER ONE BACKGROUND OF THE STUDY 1.1 INTRODUCTION     In this project, design and implementation of a computerize visa processing information system is based on how you can get lost of information about our service, from advice on how to apply for a visa, to news about immigration policy changes. I hope you find it helpful.     UK visas... Continue Reading
    (A CASE STUDY OF BRITISH EMBASSY) ABSTRACT This project is aimed at improving a long lasting processing system on visa. It is also aimed at keeping records of all immigrants and for processing visa with view of modifying it into a full computerized system. The study... Continue Reading
    (A CASE STUDY OF THE NIGERIAN CEMENT COMPANY PLC, NKALAGU PERSONNEL DEPARTMENT) ABSTRACT The world in its development has gone through three evolutionary stages- The Stone Age, The Jet Age and Currently the Computer Age. The Computer Age is a stage that is geared towards... Continue Reading
    ABSTRACT Having discovered the importance of computers in al ranks and aspects of life, computer system is applicable to almost all human activities and has been employed to automats most activities especially in areas were management data is of outmost importance. Due to unauthorized access to data in database, repose disclosure or modification... Continue Reading
    A CASE STUDY OF LEECON FINANCE AND INVESTMENT LTD ABSTRACT Having discovered the importance of computers in al ranks and aspects of life, computer system is applicable to almost all human activities and has been employed to automats most activities especially in areas were management... Continue Reading
    (A CASE STUDY OF A PIGGRY FARM) ABSTRACT In this study the researcher aimed at computerizing piggery farm management information system. A piggery farm is a kind of farm management where pigs are been reared and care for, for the purpose of production to do this the... Continue Reading
    ABSTRACT This project deals with the network of livestock but focuses on the information of the livestock and how they interact with the physical environment. This new design is meant to given the public information on livestock making use of the computers. This project will also focus on animal husbandry, breading, feeding, and management of... Continue Reading