+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

DESIGN AND IMPLEMENTATION OF RADIO CONTROLLED CAR LOCK WITH 5-MINUTES IGNITION DEACTIVATION FACILITY

  • Type:Project
  • Chapters:5
  • Pages:65
  • Format:Microsoft Word
(Computer Engineering Project Topics & Materials)

DESIGN AND IMPLEMENTATION OF RADIO CONTROLLED CAR LOCK WITH 5-MINUTES IGNITION DEACTIVATION FACILITY

ABSTRACT

This project deals with the design and implementation of a radio controlled car lock with 5-minutes ignition deactivation facility capable of locking a vehicle using a remote control from a distance. The system is designed in two functional units; the transmitter which is an RF handheld remote control, and the receiver units. The receiver unit is realized in several modules. A tuned radio frequency receiver (TRF) output is used to trigger a bi-stable multi-vibrator configured using CD 4013 whose output is used to trigger the car lock switch. The four doors of a conventional car are represented using four push and hold switches wired to trigger a 5-min delay circuit realized with Ne555 timer in mono-stable mode. The system works in such a way that if your car is snatched at gunpoint, you simply press the remote and the car locks by switching off a green LED before the armed robber zoom off. And once any of the doors is opened and closed, the vehicle automatically comes to a stop after five minutes. And the ignition lamp goes off too. The system also contains a reset switch installed at a recessed location in the car for resetting the locking system when the car is found. Due mainly because of the area of application, the system is chordless.

TABLE OF CONTENT

Title page       -           -           -           -           -           -           -           -           -           i

Certification page    -           -           -           -           -           -           -           -           ii

Approval page          -           -           -           -           -           -           -           -           iii

Dedication     -           -           -           -           -           -           -           -           -           iv

Acknowledgement               -           -           -           -           -           -           -           v

Abstract         -           -           -           -           -           -           -           -           -           vi

Table of content       -           -           -           -           -           -           -           -           vii

List of tables             -           -           -           -           -           -           -           -           -          ix

List of figures           -           -           -           -           -           -           -           -           x

Chapter One

1.1.           Background of the study     -           -           -           -           -           -           1

1.2.           Problem statement   -           -           -           -           -           -           -           1

1.3.           Aim and objectives              -           -           -           -           -           -           2

1.4.           Significant of the project    -           -           -           -           -           -           2

1.5.           Specification             -           -           -           -           -           -           -           -           3

1.6.           Project report organization-           -           -           -           -           -           4

1.7.           Definition of terms -           -           -           -           -           -           -           5

Chapter Two           

2.1.           Overview of Relevant Technology           -           -          -           -           6         

2.2.           Analysis and limitation of Existing system         -           -           -           6

2.3.           Historical development of project            -           -           -           -           -           7

2.4.           Analysis of the proposed    -           -           -           -           -           -           8

2.5.           Summary of literature Review       -           -           -           -           -           8

2.6.           Project Design methodology          -           -           -           -           -           9

2.7.           How car ignition work         -           -           -           -           -           -           9         

2.8.           Electromagnetic spectrum -           -           -           -           -           -           11

2.9.           Tuned Radio frequency      -           -           -           -           -           -           14

2.10.       Tune class Amplifiers         -           -           -           -           -           -           15

2.11.       The Ne555 timer      -           -           -           -           -           -           -           16

2.12.       Other system components  -           -           -           -           -           -           18

Chapter Three

3.0.           Introduction -           -           -           -           -           -           -           -           25       

3.1.           The power Supply Unit Design      -           -           -           -           -           25

3.2.           The Transmitter  Unit Design         -           -           -           -           -           25       

3.3.           The Receiver Unit Design   -           -           -           -           -           -           26

3.4.           The Locking Unit     -           -           -           -           -           -           -           26

3.5.           Summary       -           -           -           -           -           -           -           -           27

Chapter four

4.0.           Introduction -           -           -           -           -           -           -           -           28       

4.1.           Power supply unit    -           -           -           -           -           -           -           28

4.2.           Transmitter Unit       -           -           -           -           -           -           -           28       

4.3.           The Receiver  Unit   -           -           -           -           -           -           -           29

4.4.           Evaluation     -           -           -           -           -           -           -           -           29

4.5.           Summary       -           -           -           -           -           -           -           -           32

Chapter five

5.1.           Summary of achievement   -           -           -           -           -           -           34

5.2.           Problem Encountered and solution           -           -           -           -           34       

5.3.           Conclusion    -           -           -           -           -           -           -           -           34

5.4.           Suggestion for Further Improvement        -           -           -           -           35

References    -           -           -           -           -           -           -           -           36

Appendix I    -           -           -           -           -           -           -           -           37       

LIST OF TABLES

2.1.      Radio frequency controlled           -           -           -           -           13

2.2.      The connection of pins       -           -           -           -           -           16

4.1.      Bill of engineering quality -           -           -           -           -           32

LIST OF FIGURES

Share This

Details

Type Project
Department Computer Engineering
Project ID CPE0023
Price ₦3,000 ($9)
Chapters 5 Chapters
No of Pages 65 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Computer Engineering
    Project ID CPE0023
    Price ₦3,000 ($9)
    Chapters 5 Chapters
    No of Pages 65 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT This project deals with the design and implementation of a radio controlled car lock with 5-minutes ignition deactivation facility capable of locking a vehicle using a remote control from a distance. The system is designed in two... Continue Reading
    ABSTRACT: This project deals with the design and implementation of a radio controlled car lock with 5-minutes ignition deactivation facility capable of locking a vehicle using a remote control from a distance. The system is designed in two functional units; the transmitter which is an RF handheld remote control, and the receiver units. The... Continue Reading
    ABSTRACT This research work deals with an online radio streaming application. Chapter one is an introduction to the project to describe what the project entails. It discusses the problems in the existing system. Also described in chapter one are the aim, the objectives, the significance and the limitation of the study. Chapter two is the... Continue Reading
    CHAPTER ONE INTRODUCTION The evolutionary trend in industrial electronics and automation has engulfed all parts of the world and proved more challenging to as third world like Nigeria. Regarding the milestone, it was decided to make the choice of project research on the design and implementation of an automatic 3 - phase change – over with... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1     INTRODUCTION           Production transact business through communication to both within and outside their area of operation.  The business transacted can be relevant to their set objectives in one-way or the other there is no doubt... Continue Reading
    ABSTRACT The increasing rate of crime, attacks by thieves, intruders and vandals, despite all forms of security gadgets and locks still need the attention of researchers to find a permanent solution to the well being of lives and properties of individual. To this end, we constructed a cheap and... Continue Reading
    ABSTRACT The practical importance of a battery charger in today world cannot be over emphasized. This is so as those batteries accumulators are immensely needed by out auto mobile and in science laboratories. This thesis describes the methodical approach to the design and construction of any battery charger. However the procedure fro developed... Continue Reading
    ABSTRACT An FM transmitter is an electronic device which, with the aid of an antenna, produces radio waves. The transmitter itself generates a radio frequency alternating current, which is applied to the antenna. When excited by this alternating current, the antenna radiates radio waves. Frequency modulation (FM) transmitter generates the radio... Continue Reading
    LOAN LOSSES IN COMMERCIAL BANK LENDING A COMPARATIVE STUDY OF GOVERNMENT CONTROLLED AND PRIVATE BANKS ABSTRACT With the unprecedented display of interest in the banking business in the wake of structural adjustment programme, the fear of imminent bank failures as a result of anticipated down turn in the fortunes of banks has remained lightened.... Continue Reading
    RADIO PROGRAMMES IN NATIONAL DEVELOPMENT: (A CASE STUDY OF IBC RADIO STATION, OWERRI – IMO STATE). ABSTRACT The project topic “Radio Programmes in National Development” is a study to show how radio is used in the promotion of building the life span and the living standard of a society or nation, through the information in form of programmes... Continue Reading