+234 813 0686 500
+234 809 3423 853
info@grossarchive.com
ESTIMATION OF QUALITY CONTROL AND HEAVY METALS PRESENT IN KUNU ZAKI - Project Ideas | Grossarchive.com

Explore Project Topics on: ESTIMATION OF QUALITY CONTROL AND HEAVY METALS PRESENT IN KUNU ZAKI

Related Works

Nine samples of freshly prepared kunu was taken from local vendors and hawkers at Tanke area, Ilorin, Kara State and analyzed for microbial quality. The pH of the samples ranged from 2.66 to 4.06. The total bacterial count ranged from 1.5×104 to 7.4×104 cfu/ml; the total coliform count ranged from 1.0x102 to 8.0x103cfu/ml; the faecal coliform... Continue Reading
ABSTRACT 24 samples of different brands of yoghurt were collected from 2 popular Lagos market and Atomic Absorption Spectrophotometer was used for the determination of heavy metals i.e. Lead, Cadmium and Chromium.   100% of the samples were found to have the concentration of heavy metals below the safe limit recommended by world health... Continue Reading
ABSTRACT This study was initiated as a follow-up information on some impounded products tomato puree (Samples A and B) chocolates and candies (Samples C, D, E and F) imported from China, and sold in Nigerian markets. This result as their failure to meet National Agency for food drug administration and control (NAFDAC) regulatory standard. Samples... Continue Reading
The  physicochemical  parameters  and  levels  of  selected  heavy  metals  (Cd,  Cr,  Mn,  Zn  and  Pb)  in soil  around  Dana  Steel  Rolling  Limted  Katsina  were  investigated  in  this  research.  The  sample  area was  divided  into  four  units;  East,  West,  North  and  South  and  label  as ... Continue Reading
The presence study aimed to investigate the phytochemical and heavy metals level in selected vegetables grown in Kalambaina area ,the phytochemical were determined using analytical methods and the heavy metals (Cd, Pb, Zn, Ni, Cr and Cu) concentration in vegetables and water were determined using atomic absorption spectroscopy (AAS). The study... Continue Reading
THE OCCURENCE OF HEAVY METALS IN GILLS,MUSCLES, AND LIVER OF CHRYSICHTHYS NIGRODIGITATUS OBUFA ESUK BEECH , GREAT KWA RIVER CHAPTER ONE 1.1 Introduction Heavy metals are those metallic elements with high atomic or specific gravity that is at least five times greater than that of water. Several elements have been listed in this group. The presence... Continue Reading
ABSTRACT  The concentration of heavy metals such as Pd, Cd, Cu and Cr were studied using AAS on vegetable samples such as Tomato (fruit and leaf) and Onion bulb. Trace element as Cu showed high concentration. The concentration of heavy metal like Cu ranged from of 0.155 to 0.024mg/kg in tomato fruit; 0.120 to 0.057mg/kg in leafy tomato; 0.118 to... Continue Reading
ABSTRACT This study was conducted to investigate the level of translocation of heavy metals in vegetables(spinach and okra) with soils samples from farmlands irrigated with Nasarawa Toto River Bank water in Nasarawa state Nigeria. Using atomic absorption spectrophotometry(AAS), concentrations of Pb, Cd and Cr are determined in ten different... Continue Reading
ABSTRACT The aim of the project is accounting information as a tool for management decision. The work covers various process of account information (management Account, financial account, standard for accounting information). This project will also consider possible ways of using accounting information as a tool for management decision. This... Continue Reading
ABSTRACT The estimation of vitamin C in Tangerine Juice was investigated, the results obtained using titrimetric method shows that one tangerine fruit juice contains approximately 10mg of vitamin C content, and the 19 fruits sample used in the experiment contains about 190mg of... Continue Reading
ABSTRACT The estimation of vitamin C in Tangerine Juice was investigated, the results obtained using titrimetric method shows that one tangerine fruit juice contains approximately 10mg of vitamin C content, and the 19 fruits sample used in the experiment contains about 190mg of... Continue Reading
ABSTRACT The radiation dose received by the patient during the radiological examination is essential to prevent risks of exposure. The aim of this work is to study organ equivalent and effective dose s for common diagnostic radiographic examinations at General hospital Dutsin-Ma local Government Area, Katsina State, Nigeria. We estimated the... Continue Reading
ABSTRACT The radiation dose received by the patient during the radiological examination is essential to prevent risks of exposure. The aim of this work is to study organ equivalent and effective dose s for common diagnostic radiographic examinations at General hospital... Continue Reading
ABSTRACT The study is aimed at evaluating the microbiological quality control of soymilk beverage sold in I.M.T campus 3 Enugu. The soymilk samples were collected randomly from all the soymilk hawkers in campus 3 I.M.T Enugu. 30 soymilk samples were collected and used for the study. All the sample were freshly prepared, serial dilution of the... Continue Reading
SYNOPSIS Quality control can be seen as the activities that sustain the quality of a product in order to satisfy a given requirement or meet certain standards. (McGraw-Hill Dictionary, 2003). It is applicable in all phases of the production cycle. In food products, qualities such as composition, structure (molecular, microscopic and macroscopic),... Continue Reading
SYNOPSIS Quality control can be seen as the activities that sustain the quality of a product in order to satisfy a given requirement or meet certain standards. (McGraw-Hill Dictionary, 2003). It is applicable in all phases of the production cycle. In food products, qualities such as composition, structure (molecular, microscopic and macroscopic),... Continue Reading
ABSTRACT          The application of the principal of quality control and inspection of a product is essential to any company’s future   development and it is of increasing important if a company is to survive under increasing competitor and constant demand for more consistent and reliable product. The progressive manufacturing... Continue Reading
CHAPTER ONE BACKGROUND OF THE STUDY Introduction The term ‘Viscosity’ describes a material’s property from a physicists point of view, it is a fluids thickness. Scientifically speaking, It is the measure of a fluids internal flow resistance to being deformed. (Szekely, 1999). Some liquid flow more easily than others do, for example honey is... Continue Reading
ABSTRACT Water is one of the most important substances on earth. All plant and animals must have water to survive. If there is no water there would be no life on earth. Disease causing germs and chemicals find their way into water supplies when this happens, the water becomes polluted. The principal objective of this research work is to asses the... Continue Reading
(A CASE STUDY OF CADBURY NIG. PLC) ABSTRACT This research study examined the effects and possible solutions of product quality control as it affects the ordinary customer using Cadbury Nig. Plc as a case study. The research study was aimed at evaluating the product quality and... Continue Reading
PROBLEM AND PROSPECTS IN QUALITY CONTROL IN MANUFACTURING FIRMS CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY According to Crosby (1979) “quality is conformance to requirement and those requirement must be defined in measurable and clearly stated terms.” Quality is one of the goals or objectives organization seek to achieve. But often... Continue Reading
(A CASE STUDY OF IBESE CEMENT PLANT LAGOS) CHAPTER ONE INTRODUCTION 1.1.    BACKGROUND OF THE STUDY The history of cement production in Nigeria can be traced back to 1957. From the onset, about three cement plants were commissioned by the Northern, Eastern and Mid-Western regional... Continue Reading
CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY According to Crosby (1979) “quality is conformance to requirement and those requirement must be defined in measurable and clearly stated terms.” Quality is one of the goals or objectives organization seek to achieve. But often... Continue Reading
CHAPTER ONE INTRODUCTION 1.1   BACKGROUND OF THE STUDY According to Crosby (1979) “quality is conformance to requirement and those requirement must be defined in measurable and clearly stated terms.” Quality is one of the goals or objectives organization seek to achieve. But... Continue Reading
                                       (A CASE STUDY OF ADAOBI PLASTIC NIG LTD ABA) ABSTRACT For any organization to achieve its objectives of profit maximization, it is required that its products must be of high quality, so as to... Continue Reading
A BSTRACT The pervasive influx of low quality product into the market has triggered the turning point for all production companies. Production companies that work towards excellence now inculcate quality in their operations. Given that consumers would always patronize products of companies that guarantee high quality; this research is directed... Continue Reading
CHAPTER ONE INTRODUCTION 1.1   Background of the Study The importance of quality education in nation building can the important of quality education in nation building can not be over emphasized. There have been several calls on the educational managers on how to make the educational system to be more vibrant in the quality of its products... Continue Reading
CHAPTER ONE INTRODUCTION  BACKGROUND OF THE STUDY The universal role of plants in the treatment of disease is exemplified by their employment in all the major systems of medicine irrespective of the underlying philosophical premise. How and when such medicinal plants... Continue Reading
DESIGN AND IMPLEMENTATION OF A SOFTWARE BASED QUALITY CONTROL SYSTEM  CHAPTER ONE INTRODUCTION A quality control system in production management is a qualitative technique with strong financial implications having direct relationships with production, marketing, purchasing and financial politics. Also, it is a system used in the management of... Continue Reading
CHAPTER ONE INTRODUCTION 1.1      BACKGROUND OF THE STUDY Product quality and price constitute vital factors that consumers consider in the choice of product. Unfortunately however, the qualities of products continue to decline due to a number of factors. First and... Continue Reading