Chemical Engineering Project Topics & Research Materials (PDF & DOC)

Browse over 503 Chemical Engineering project topics and complete research materials for B.Sc, HND, ND, and postgraduate students. All topics are well-researched and suitable for Nigerian universities and polytechnics :(Page 11)
Showing 251 - 275 of 503

251) Kinetic Study And Optimization Of Selected Factors Affecting Corrosion Using Rsm

  The kinetics and optimization of inhibitive action of leaves extract of pawpaw, Azadirachta indica (neem tree) and bitter leaf on corrosion of mild steel in acidic medium was studied by weight loss technique using central composite design of response surface methodology for optimization. The metal was analyzed using Atomic Absorption... Continue Reading
  • Type:Project
  • ID:CNG0316
  • Pages:167

252) Plant Design Of 250,000kg/yr Of Lindane

EXECUTIVE SUMMARY This work presents the design of a plant that will produce 250000kg/yr of lindane from benzene, chlorine and water at high temperature and pressure using direct chlorination method. The feeds are sent into a chlorinator, the crude product from the chlorinator is continuously decanted into a decanter and the bottom product HCl is... Continue Reading
  • Type:Project
  • ID:CNG0311
  • Pages:164

253) Remediation Of Soil Contaminated With Diesel Using An Anionic Surfactant (las) As An Agent. (2)

Environmental pollution as a result of drilling and mining activities in areas where deposits of petroleum and oil are found, proved a great threat to the wellness of the fauna and flora as well as to the humans.  TABLE OF CONTENTS  Background of study literature review Oil pollution act of 1990 Diesel Chemical composition  Volatility of Diesel... Continue Reading

254) Design And Fabrication Of Sedimentation Test Rig

Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading

255) The Principle Of Particle Settling In Motionless Fluid

Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading

256) Characterization Of Non-edible Oil From Waste Plant Materials For Bioidiesel Production

Oil obtained from orange peels and velvet tamarind nut by solvent extraction (n-hexane and acetone) using the soxhlet extractor were investigated as feedstock’s to determine some of the suitable parameters such as iodine value, saponification value, specific gravity, density, acid value and free fatty acid value, and their percentage yield that... Continue Reading

257) Comparative Study Of The Different Methods Used In Re-refining Used Lubricating Oil

Engine oils are made from crude oil and its derivatives by mixing of certain other chemicals (additives) for improving their certain properties. Lubricating oil is used to lubricate moving parts of engine, reducing friction, protecting against wear, removing contaminants from the engine, act as a cleaning agent, and act as an anti corrosion and... Continue Reading

258) Research Paper On Hand Sanitizer

The 15 th of October has been decreed a day to focus on germs specifically. It’s the germs on our hand that are in the firing line .The world health organization estimates that 3.5 million children die from diarrhea and lower respiratory tract infections each year. That’s why global hand washing day was decreed. Sanitation of hand has... Continue Reading

259) Conversion Of Waste Plastics To Fuel Oil

Waste plastic disposal and excessive use of fossil fuels have caused environment concerns in the world. Both plastics and petroleum derived fuels are hydrocarbons that contain the elements of carbon and hydrogen. The difference between them is that plastic molecules have longer carbon chains than those in LPG, petrol, and diesel fuels.... Continue Reading

260) A Comprehensive Research On Preparation And Characterization Of Corn Curbs Adsorbent

In preparation and characterization of adsorbent obtained from corn curbs, potassium hydroxide was used as an activating agent at ratio of 1:1, 7:8 and 3:4 with the corn curbs and their pH values were found to be 8.5, 8.03 and 8.0 respectively, ash content were found to be 41.56, 46.78 and 48.31wt%. The BET surface area values were 17.762461,... Continue Reading

261) Remediation Of Soil Contaminated With Diesel Using An Anionic Surfactant (las) As An Agent. (2)

Environmental pollution as a result of drilling and mining activities in areas where deposits of petroleum and oil are found, proved a great threat to the wellness of the fauna and flora as well as to the humans.  TABLE OF CONTENTS  Background of study literature review Oil pollution act of 1990 Diesel Chemical composition  Volatility of Diesel... Continue Reading

262) Production Of Bioethanol From Cassava Using A Hybrid Of Saccharomyces Cerevisiae And Saccharomyces Paradoxus

Cassava is considered as a potential source for the commercial production of bioethanol because of its availability and low market price. It can be used as a basic source to support large-scale biological production of bioethanol using microbial amylases. With the progression and advancement in enzymology, starch liquefying and... Continue Reading

263) Kinetics And Equilibrium Studies Of Colour Pigments Removal From Crude Palm Oil Using Acid Activated Kaolin Clay

The  adsorptive  removal  of  the  colour  pigment  (due  to  high  content  of  carotenoids)  from  palm oil  using  ortho-phosphoric  acid  activated  kaolin  clay  was  investigated  in  this  research.  The clay  was  activated  at  different  acid  concentrations  to improve  its  adsorptive... Continue Reading

264) Corrosion Studies Of Mild Steel In Biodiesel Obtained From Ghee Butter (mann Shanu)

It is of no doubt that one day, fossil fuels, which the whole world highly depends on, will come to a halt in a few decades to come. To this reason, researches have been geared towards alternative sources of energy: biodiesel, a form of renewable energy (energy that can be regenerated once used up), is one that has been made known and being tested... Continue Reading

265) Production Of Biodiesel From Cultivated Microalgea On Municipal Waste Water

Cultivation of microalgae on municipal waste water Extraction of the oil from the algae cells. Production of biodiesel from the algae oil. Characterization of the biodiesel produced. Chapter 1 Introduction 1.1 Background 1.2 Statement of Problem 1.3 Aims and Objectives of Study 1.4 Significance of Study 1.5 Scope of Study Chapter 2 Literature... Continue Reading

266) Construction Of Portable Wheel-barrow

After detailed study on machines and levers, the construction work started as follows:- Making out, pattern development, cutting filling, drilling, machining, assembling, welding and finishing. Detailed procedures carried out is located at the sequence of operation in subsequent pages. The machine has scale of 1:5 in all parts of its... Continue Reading

267) Formulation And Production Of Levera Soap

The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow... Continue Reading

268) The Effect Of Liquid Floerate And Gas Flowrate On A Packed Absorption Tower And Repair Of Equipment

The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to repair and restore the packed absorption tower to good working condition. Trouble shooting revealed that the exit drain value was broken due to carelessness on the part of former user of the... Continue Reading

269) Characteristics Of Local Produced Oil From Groundnut Oil

This project “Characteristics Of Local Produced Oil From Groundnut Oil” was carried out using ten cups of groundnut seeds that was purchased from a local market in Enugu metropolis. The oil these seeds were in Enugu using solvent extraction method. Two different solvents were used in the extraction namely: Ethane and order to compare... Continue Reading

270) Utlilization Studies Of Enugu Coal

This study has its theme as a utilization studies of Enugu coals with the view of studying its properties, classification, preparation storage etc comparing coals obtained from different locations. The Enugu coal is a sub-bitummous and non coking coal. It is very rich in waxes and resins, thus it may be suitable for the production of... Continue Reading

271) Design And Construction Of A Refrigerating Unit

The design and construction of s refrigerating unit is handled from the knowledge of the working principles of laws of thermodynamics. The size of the containing vessel i.e the case as established to be of 45cm by 32 cm in dimension. The Angle iron mild steel to used in the fabrication and welding. The box case of two layers are... Continue Reading

272) Construction Of Table Top Liquidliquid Extraction Unit

A table top liquid-liquid extraction unit was constructed. The project also involved the repair and servicing of peristaltic suction pump, by painting it, replacing the connecting cord to the power supply, refilling of the work out suction plates, teeth and general servicing of the equipment. The glass absorption columns were provided as... Continue Reading

273) Design And Implementation Of A Window Based Front-desk Information System (a Case Study Of May Fresh Savings And Loan Limited Onitsha

In account form analysis, a lot of discrepancies causes by manual aspect of the form such as: lost of form, inability to correct intakes, poor storage facilities have been a problem in the May fresh savings and loan limited account form. But in recent times, the computer has come to the aid of our banks, May fresh in particular. The... Continue Reading

274) Interface Monitoring And Analysis Of Pipeline And Products Marketing Company Limited Enugu Depot

This research was carried out with the sole aim of monitoring interface in the transportation of petroleum pipeline products and the analysis of this product from Enugu depot. In the research it was observed that product contaminates each other if interface was not properly monitored and cut at the appropriate time. The three major... Continue Reading
  • Type:Project
  • ID:CNG0283
  • Pages:128

275) The Effect Of Environment On Corrosion

In this research project, the various nail were subjected to six environments so as to check the effect of the environments on corrosion of the nails. Two sets of nails were used; normal nail and concrete nail. Six of each type while the other not coated. The research was carried out in the physical chemical laboratory of the institute of... Continue Reading
Cant find your topic in Chemical Engineering? Reach us on WhatsApp or call +234 813 0686 6500 .
Choosing the right Chemical Engineering project topic is essential for academic success. GrossArchive remains a trusted platform for students seeking quality project topics and complete research materials across multiple disciplines. Explore the available Chemical Engineering project topics on GrossArchive and complete your final year project with confidence.

Students researching Chemical Engineering project topics often explore related areas such as Accounting project topics, Business Administration and Management project topics, Economics project topics and Marketing project topics to broaden their research scope.

whatsappWhatsApp Us