ABSTRACT The project work Rehabilitation and Repair of A Window Unit Air Conditioner exposes us to the internal working mechanism of the window unit a.c. The working principles component unit, faults and effective repairs carried out to ensure the serviceability of the broken down unit. It buttress the need for routine maintenance, and effective... Continue Reading
ABSTRACT This research is centered on the design and fabrication of copula furnace and atomizer for the production aluminium powder metal with the available material.0.4kg of refined coke was chosen as the basis for material and energy balance calculations and the design calculations performed from whose values are used to produce the design... Continue Reading
ABSTRACT Voting is a very important process in the Nigerian political system. It is one of the means and most effective method of ensuring a legitimate government through popular participation. To enthrone sound democracy and stability in the political system of the Enugu state a system of rig-free voting has to be put in place. The system... Continue Reading
ABSTRACT This work is aimed at the removal of hazardous gases and dust particles, air channeling etc. This work is aimed at achieving industrial waste control therein safe – guarding the immediate environment. Chapter one accounts for the introduction of the project. Chapter two involves literature review in the origin, types and alternative... Continue Reading
ABSTRACT: The designed air driven engine is an economic friendly engine which operates with the aid of a compressed air. in principle, an air driven engine uses the expansion of compressed air to drive the pistons of an engine. an air driven engine is a pneumatic actuator that creates useful work by expanding compressed air. there is no mixing of... Continue Reading
ABSTRACT Packaging of food which is viable means of business opportunity has been exploited by individuals and corporate bodies for a very long time because the importance of packaging food products are very enormous ranging from protection of the product to preventing the food from spoiling. There is no way one can successfully go into business... Continue Reading
This project seek to modify the existing cassava grating machine to make it to be self-feeding in operation, to make the operation of the machine easier, safer The existing processing techniques used in the production of cassava starch and cassava dough leaves much to be desired. There are difficulties in the grating of the cassava dough, since... Continue Reading
ABSTRACT This project has been design and fabricated with special economical needs for small scale baking industries, wholesalers and distributors who impact this type of baking even from outside the country to su0pply the customers. And in view of the scarcity and high cost of gas and electricity in the country and also smoke release when using... Continue Reading
Abstract This report presents the optimisation of a ceramic-matrix composite (anthill sand and cement), reinforced with treated coir fibres for applications in the construction of a low costsolar powered cooking stove to solve the current trends in the depletion of forest spaces in Ghana due to excessive destruction as a result of using firewood... Continue Reading
ABSTRACT During forging or furnace operation, air is the utility that should be available at all time in order to ensure a smooth and standardized operation. Supplying air manually will reduce productivity and more man hour to accomplish a given task. Thus, an electric blower was designed in this regard with an efficient electric motor as the... Continue Reading
CONSTRUCTION OF METAL SHARPENING AND DULLING DEVICE ABSTRACT As a result of modern development in Science and Technology, most of the large scale industrial used machine were now modernized to simple small and efficient machines. Some of these machines were either operated manually or the aid of electricity. For this reason, big metal sharpening... Continue Reading
REPAIR OF DEEP FREEZER ABSTRACT This work gives an account of all activities carried out to restore a faulty and abandoned deep freezer to normal functioning. This report therefore contains the different stages embarked in the execution of the project. These include the literature back ground, checking’s conducted, cleaning, repair operations... Continue Reading
CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR TABLE OF CONTENT CHAPTER ONE 1.1 Introductions 1.2 Description of the screw conveyor CHAPTER TWO 2.1 Mode of operation 2.2 Material selections CHAPTER THREE 3.1 design 3.2 design analysis 3.3 principle of operation 3.4 capacity of the screw conveyor 3.5 sequence of operation/... Continue Reading
ABSTRACT This study tend to investigate the effect of synthetic and natural moulding sand on casting of flange like component. In this study FUTA logo was selected to be cast using aluminium metal. The casting was carried out and the result was analysed according to the quality of casting. It was discovered that for large size component using... Continue Reading
ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It also comprises of materials as follows: Mechanical and Electrical section Mechanical section include the frame structure, lever and the pedal mechanism.... Continue Reading
ABSTRACT Knowledge could only be obtained successfully by the use of book for research but unfortunately because of hard times, books have become very expensive. This is called for presentation of books already purchased whether in the library or on the household so that it can be used by the future generation. There could only be done by... Continue Reading
ABSTRACT The physical presence of the oil industry in Nigeria is so large and has resulted in a lot of activities in the upstream sector which has deleterious effects on ecosystem stability and local biodiversity – which the peoples‘ livelihoods depend upon. This research provides an overview of environmental issues in the oil and gas industry... Continue Reading
ABSTRACT The study examined the effects of faulty design and construction on the maintenance of building. A survey of randomly selected samples of 20 builders and 15 architects were conducted. Questionnaires were used to collect data from Architects and Builders. The survey included 11 groups of defects and sub defects in each groups. The... Continue Reading
ABSTRACT The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint. The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is driven by an electrically... Continue Reading
ABSTRACT The need for an authentic and reliable report relating to the repairs and rehabilitation of a faulty air conditioner is inevitable. The fact that many people use the air conditioner to cool the temperature in their respective home and offices make its maintenance a top priority to every individual in order to avoid huge expenditure in... Continue Reading
ABSTRACT This thesis aims to explore the theories and techniques behind procedures of developing a high precision cost-effective mini CNC milling machine. This newly designed machine tool can be widely used in electrical and medical industry for making small parts and engraving small features. Various structures were explored and compared... Continue Reading
ABSTRACT Steel is arguably the world’s most ‘advanced” material. It is a very versatile material with a wide range of attractive properties which can be produced at a very competitive cost. It has a diverse range of applications, and is second only to concrete in its annual production tonnage. Steel is not a new invention which leads to a... Continue Reading
CHAPTER ONE INTRODUCTION In this pass, cutting of grasses in the school, track or filed, Industries hotel, public centers, Agriculture lands etc. was done by machete or cutlass. This method of manual cutting not only was laborious but also time consuming as it is human effort that is entirely needed both for cutting and motion. There was also... Continue Reading
ABSTRACT Propeller agitator is a specialized of various types of substances. It consists of three basic components which are the shaft, blade and the vessel. In the construction, mild steel was chosen due to it’s inherent properties. After the procurement, the following constructional operations were... Continue Reading