+234 813 0686 500
[email protected]

Electrical Engineering Project Topics & Research Materials (PDF & DOC)

Browse over 530 Electrical Engineering project topics and complete research materials for B.Sc, HND, ND, and postgraduate students. All topics are well-researched and suitable for Nigerian universities and polytechnics :(Page 16)
Showing 376 - 400 of 530

376) Investigation On Heat Dissipating Properties Of Electronic Components With The Aim To Determine The Correct Size Of Heat Sink

Research and optimization of cooling of electronic components using heat sinks becomes increasingly important in modern industry. Numerical methods with experimental real world verification are the main tools to evaluate efficiency of heat sinks or heat sink systems. In this research, the physical problems associated with heat removal of... Continue Reading

377) User Programmable Door Lock

This project report describes the design and construction of an electronic door lock which uses a microcontroller as the main control unit. The project’s objective was to interface this microcontroller with an LCD, keypad and a DC motor. However, programming the PIC chip to perform a task like identifying an authorised user is also... Continue Reading

378) Ultrasonic Object Detection

Project The main aim of this system is to detect object that will be ahead of ultrasonic transducer. This application is very useful in areas like monitoring and also very useful in wild life photography. There are two main parts of the ultrasonic detector. First one is emitter that produces a 40kHz sound wave. Second... Continue Reading

379) Design Of Solar Street Light System From Ucc West Gate To Elmina

Content Pages DECLARATION ii ACKNOWLEDGEMENT iii DEDICATION iv TABLE OF CONTENT v CHAPTER ONE Introduction 1 1.1 Background of the Study 1 1.2 Problem of Study 2 1.3 Objectives of Study 3 1.4 Scope of Study 3 1.5 Significance 4 CHAPTER TWO Literature Review 5 2.1 Introduction 5 2.2 Types of Street Lights 6 2.3 Photovoltaic Effect/Process 9 2.4... Continue Reading

380) Design And Construction Of Restaurant Order System

This project deals with the design and development of restaurant order meal system, in order to reduce the number of staff. In meal ordering project, you can request for any kind of food or drinks available in the restaurant which contains the menu embedded in each button. Microcontroller is the central processing unit CPU of this project... Continue Reading

381) Design And Construction Of A 20-m Distance Remotely Controlled Metal Detector Using Arduino

The project DESIGN AND CONSTRUCTION OF A 20-METRE DISTANCE REMOTELY CONTROLLED METAL DETECTOR is used for detecting metallic objects such as phones, bombs, and other metallic objects that are hidden from view. The design is based on the principle of the Resonant Frequency Oscillator (RFO) metal detectors in which oscillation is a function... Continue Reading

382) Design Of Solar Street Light System From Ucc West Gate To Elmina

Content Pages DECLARATION ii ACKNOWLEDGEMENT iii DEDICATION iv TABLE OF CONTENT v CHAPTER ONE Introduction 1 1.1 Background of the Study 1 1.2 Problem of Study 2 1.3 Objectives of Study 3 1.4 Scope of Study 3 1.5 Significance 4 CHAPTER TWO Literature Review 5 2.1 Introduction 5 2.2 Types of Street Lights 6 2.3 Photovoltaic Effect/Process 9 2.4... Continue Reading

383) Design And Construction Of Restaurant Order System

This project deals with the design and development of restaurant order meal system, in order to reduce the number of staff. In meal ordering project, you can request for any kind of food or drinks available in the restaurant which contains the menu embedded in each button. Microcontroller is the central processing unit CPU of this project... Continue Reading

384) Design And Construction Of A 20-m Distance Remotely Controlled Metal Detector Using Arduino

The project DESIGN AND CONSTRUCTION OF A 20-METRE DISTANCE REMOTELY CONTROLLED METAL DETECTOR is used for detecting metallic objects such as phones, bombs, and other metallic objects that are hidden from view. The design is based on the principle of the Resonant Frequency Oscillator (RFO) metal detectors in which oscillation is a function... Continue Reading

385) Alternative Current Pulse Width Modulation Control For Induction Motor

An induction or asynchronous motor is a type of AC motor where power is supplied to the rotor by means of electromagnetic induction, rather than by slip rings and commutators as in slip-ring AC motors. Single phase induction motor is the most familiar of all electric motors & they are similar to a 3-phase squirrel cage induction motor. It... Continue Reading

386) Induction Motor Control System

The present invention relates to an improved control system for starting a three phase induction motor comprises improved power contactors configured to have a pair of three pole delta and main contactors, and a single pole star contactor for supplying AC power to star position and delta position, a timer for controlling AC power supply... Continue Reading

387) Design And Construction Of 36w Automatic Solar Street Light Using Solar Panel, Charge Controller, Led And With Battery

CHAPTER ONE INTRODUCTION 1.1 Background Information Electricity is a general term comprising of a variety of phenomena resulting from the presence and flow of electric charge. These include many phenomena, such as lightning,... Continue Reading

388) Ho Polytechnic Project Work Guideline New New (1)

389) Design And Construction Of A Fan Speed Control System

Abstract This temperature control fan can be controlled using a microcontroller when it detects a certain temperature that has been set. The purpose of this project is to prevent the waste of voltage usage when it is not hot enough for fan to be needed. The temperature control fan has three... Continue Reading

390) E-academin: A Web Based Application For Re-engineering Academic Administration

Most organizations are deploying e-business solutions because of its numerous advantages, such as, increased productivity, reduced transactions costs, wider coverage and increased speed to market. The present academic offices in developing countries still use paper-based approach for most of their activities. Data and information are... Continue Reading
  • Type:Project
  • ID:ELE0252
  • Pages:169

391) Energy Audit, Optimisation And Management Of Liquefied Natural Gas Plants With Renewable Energy Resources Around The Plant: A Case Study Of Brass Lng, Brass Island, Nigeria

The energy generation and power consuming loads at Brass LNG facility located in Brass Island, Bayelsa State Nigeria were analyzed and compared with expected demand changes and means of minimizing cost and greenhouse gas emission were also proffered with wind and solar energy penetration into the overall power mix . The wind and solar hybrid power... Continue Reading

392) The Construction Of A 2kva Automatic Voltage Regulator

The AVR is automatic voltage regulator and it is a device which is used to regulate or stabilize electrical power supply for electrical or electronic appliances In this project, therefore, we are interested in the construction of this all important device. Furthermore, we shall discuss the techniques, processes, switching stages and then... Continue Reading

393) The Construction Of Automatic Voltage Inverter And A Battery Charger

Automatic voltage inverter is an important area in power system engineering. It is the process of using a 12v DC from the battery to achieve a 220/230V AC through the help of oscillator, drivers, power transistors and transformer. The stages are battery to oscillators, oscillators to drivers, drivers to power transistors then from power... Continue Reading

394) Contactless Power Transfer System Using Inductive Coupling-based Wireless Power Transfer (wpt) Principle

Wireless power transfer (WPT) technologies have been widely used in many areas, e.g., the charging of electric toothbrush, mobile phones, and electric vehicles. This project introduces fundamental principles of three WPT technologies, i.e., inductive coupling-based WPT, magnetic resonant coupling-based WPT, and electromagnetic radiation-based WPT,... Continue Reading

395) The Role Of Satellite Network In Future 5g Wireless Networks

The document outlines an investigation done in order to study Fifth Generation (5G) systems and to identify a role that satellite systems will play in contribution to the many advanced and diverse demands on existing telecommunication networks. This next generation network is a build-up and phenomenal improvement in wireless communication... Continue Reading

396) Commutation Failures In Hvdc Schemes

Commutation failures are very frequent dynamic events in high voltage dc (HVDC) transmission systems. Commutation failure is mostly observed at the inverter side of HVDC links, where large firing angles are used. The minimum value of the extinction angle required for the proper operation of a valve is specified by the valve manufacturer; however,... Continue Reading

397) The Ability Of Ac/dc Converters To Generate And Consume Reactive Power

The conversion of an input AC power at a given frequency and voltage to an output power at different frequency and voltage can be obtained with static circuits called power converters, containing controllable power electronic devices. Various power converters have been developed to fulfill the requirements of the wind power generation.... Continue Reading

398) Voltage Collapse In Power System

The power system is a highly nonlinear system that operates in a constantly changing environment; loads, generator outputs, voltage controllers, transmission lines, topology, and key operating parameters change continually. The behavior and output of the generators can be affected in a transient conditions. This transient condition can change the... Continue Reading

399) Variable Speed Drives For Ac Machines

Industrial drive applications are generally classified into constant-speed and variable-speed drives. Traditionally, AC machines have been used in constant-speed applications and DC machines were preferred for variable-speed. Induction machine with drive systems are widely used in applications such as pumps, paper and textile mills,... Continue Reading

400) Car Security Control Using Rfid

Security Car Using RFID System. This project is designed to enhance vehicle safety systems available. Thus, this project consists of some combination of equipment and components to create a car security system that meets the security features and use more advanced. RFID (Radio Frequency Identification) is the most reliable way to... Continue Reading
Cant find your topic in Electrical Engineering? Reach us on WhatsApp or call +234 813 0686 6500 .
Choosing the right Electrical Engineering project topic is essential for academic success. GrossArchive remains a trusted platform for students seeking quality project topics and complete research materials across multiple disciplines. Explore the available Electrical Engineering project topics on GrossArchive and complete your final year project with confidence.

Students researching Electrical Engineering project topics often explore related areas such as Mechanical Engineering project topics, Computer Engineering project topics, Civil Engineering project topics, Physics project topics and Mechatronics Engineering project topics to broaden their research scope.

Quick Navigation Menu

Gross Archive
23 Agodogba Av, Park View
Ikoyi, Lagos State,
+ 234 813 0686 6500
+234 809 3423 853
[email protected]

Copyright © Gross Archive. All Rights Reserved
Gross Archive Limited:
whatsappWhatsApp Us