Most Read Mechanical Engineering Project Topics and Materials (Page 6)

ABSTRACT Wheelbarrow is a simple machine, which belong to the second-class lever. This is because the load or resistance is placed between the effort and the fulcrum. It is used in many areas of work to convey loads that are too heavy or bulky to be carried by hand. Wheelbarrow can be used as farm equipment, industrial equipment among others.... Continue Reading

A lawnmower is a machine that uses a revolving blade or blades to cut a lawn grass. Many designs have been made, each suited to a particular purpose. Manual grass cutter has environmental issues regarding pollution's and also require the need of man power to operate and has a great maintenance to its engine. This robot is design to be environment... Continue Reading

ABSTRACT This project is focused on experimental analysis of impact of water jet on vanes. This work intends to predict the output of a pelton wheel, and to determine its optimum rotational speed. Hence this work explains how the deflection of the jet generates a force on the buckets, and how the force is related to the rate of momentum flow in... Continue Reading

ABSTRACT Bookshelf, a Mechanical arrangement of materials were documents are stored, it could be made with metal or wood. But this one is fabricated with metal. The type of metal used in the fabrication is mild steel and square baluters. The undismountable bookshelf which has five partitions and four compartment under went many process namely, the... Continue Reading

ABSTRACT Steel is arguably the world’s most ‘advanced” material. It is a very versatile material with a wide range of attractive properties which can be produced at a very competitive cost. It has a diverse range of applications, and is second only to concrete in its annual production tonnage. Steel is not a new invention which leads to a... Continue Reading

ABSTRACT This project has been fabricated with special economical needs for the small scale baking industries, wholesalers and distributors who import this type of baking oven from outside the country to supply the customers. Who wish to use it or those that cannot after gas oven can be used in baking any type of available within the tropics. It I... Continue Reading

ABSTRACT           Propeller agitator is a specialized of various types of substances.  It consists of three basic components which are the shaft, blade and the vessel.           In the construction, mild steel was chosen due to it’s inherent properties.  After the procurement, the following constructional operations were... Continue Reading

ABSTRACT During forging or furnace operation, air is the utility that should be available at all time in order to ensure a smooth and standardized operation. Supplying air manually will reduce productivity and more man hour to accomplish a given task.  Thus, an electric blower was designed in this regard with an efficient electric motor as the... Continue Reading

ABSTRACT This project work deals with the design and fabrication of a suitable journal bearing test apparatus which can help in visualizing the behavior of journal bearing and its characteristics, and in determining the bearing parameters such as load bearing capacity, maximum oil film temperature, viscosity of lubricant, oil film pressure, and... Continue Reading

ABSTRACT The project title “fabrication of flow nozzle” was done by a selected group of Engineering Students and the practiced objective (aim) of the project was centered on constructing a nozzle that is capable of transporting fluid from one to the other, to determine the charge in velocity of the moving fluid across two given areas... Continue Reading

ABSTRACT This write up outlines the design and fabrication of wood lathe machine. This type of lathe is capable of creating different wood designs using the cheapest available material and method. To achieve functional and efficient wood lathe of this kind, we analyzed as well as synthesized the different possible design solutions and concepts.... Continue Reading

ABSTRACT Composites have been developed with great success by the use of reinforcement. Monolithic materials cannot possess all the properties to be obtained hence, the need to employ the use of composite materials. Aluminum is generally utilized as a basic material particularly in the aerospace industry in view of its light weight property Be... Continue Reading

Due to the need for recycling Polyethylene terephthalate (PET or PETE) materials, especially bottles because of its various uses and applications, it was necessary that a locally made machine for crushing and shredding the PET materials was fabricated. The crushing process is necessary so as to aid the transportation and workability of the... Continue Reading

ABSTRACT Most Stock Marketing Report, production, and manufacturing firms have the basic problem of information flow between the various departments within the organization. This research is intended to highlight the role of a computerized Stock Marketing Report information system in NSEC Compare to the manual system of Stock Marketing Report. To... Continue Reading

An energy audit on the Brass Liquified Natural Gas plant at Brass Island former Agip facility was carried. The average offshore windspeed and wave return periods for 12months  were measured for their wind and wave energy potentials. Also,  the solar insolation for the location was collected for a 12month period. A pilot design based on... Continue Reading

The major components of a gas turbine are compressor, combustors, turbine and generator. It operates by continuous drawing in fresh air into the compressor. The Air is then compressed to a high pressure in the compressor and discharge into the combustion. Here the air is missed with gas and burns continuous once ignited to increase its energy... Continue Reading

see deeper... Continue Reading

ABSTRACT This project is concern about the construction of an electrical stove with three oven apartment is described in his project. It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternative means to replace the use of keroseneand gas for cooking and drying which are often... Continue Reading

ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It also comprises of materials as follows: Mechanical and Electrical section Mechanical section include the frame structure, lever and the pedal mechanism.... Continue Reading

ABSTRACT When it comes to construction projects, landscaping work, and gardening, you need the right kind of equipment to finish tasks speedily and easily. One piece of equipment you would need is a motorised wheelbarrow. This is intended to carry bulky materials and heavy loads. There are a lot of equipments that can be used these days for... Continue Reading

ABSTRACT Mechanical Engineering Department of the named Institute has many non – operational malhiues. Sequel to the fact, maintenance was poorly excuted which resulted to the breakdown deep freezer. Quality and effectiveness of machine maintenance were well observed. Also, a minimized maintenance and a highly successful repair was adopted. In... Continue Reading

ABSTRACT. A machine for corn Sheller is highly and greatly needed for consistence of usage of corn in local and international levels. With regards to this indispensable need, a corn-shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to this design objective and aims, a proper... Continue Reading

The focus of this project was the development of an ICU/Rehabilitation adjustable bed for the hospital and home environment. The project was initiated with the desire to develop an innovative, effective and inexpensive mechanism that would require an electrical supply. The design was performed systematically using various methods, procedures,... Continue Reading

ABSTRACT A 1.25KVA (2000W) inverter generator was designed, constructed and certified Ok. In this project, the design of the inverter generator is aimed at satisfying the need of converting, a D.C source of supply (12v battery) to an A.C voltage of 220v. The inverter range of output is between 200-220v. Since the inverter was designed to step-up... Continue Reading

INTRODUCTION REFRIGERATION Refrigeration is a branch of science that deals with the process of removing heat from a substance or space in order to make it cooler. Refrigerator is defined as a device that is used in cooling the internal temperature below the room temperature (that is between 250C to 300C). Generally, however, for a space or... Continue Reading